HP Color LaserJet Enterprise CP4025n User Manual
Have a look at the manual HP Color LaserJet Enterprise CP4025n User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Link speed and duplex settings The link speed and communication mode of the print server must match the network. For most situations, leave the product in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the product from communicating with other network devices. If you need to make changes, use the product control panel. NOTE:Making changes to these settings causes the product to turn off and then on. Make changes only when the product is idle. 1. Press the Home button . 2. Open each of the following menus. Press the down arrow to highlight it and then press the OK button to select it. a. CONFIGURE DEVICE b. I/O c. EMBEDDED JETDIRECT MENU d. LINK SPEED 3. Press the down arrow to highlight one of the following options. SettingDescription AUTOThe print server automatically confi gures itself for the highest link speed and communication mode allowed on the network. 10T HALF10 megabytes per second (Mbps), half-duplex operation 10T FULL10 Mbps, full-duplex operation 100TX HALF100 Mbps, half-duplex operation 100TX FULL100 Mbps, full-duplex operation 100TX AUTOLimits auto-negotiation to a maximum link speed of 100 Mbps 1000T FULL 1000 Mbps, full-duplex operation 4.Press the OK button. The product turns off and then on. ENWW Connect to a network 77