HP Color LaserJet Enterprise CP4025dn User Manual

Connect with USB
This product supports a USB 2.0 connection. You must use an A-to-B type USB cable that is no longer
than 2 m (6.5 ft).
CAUTION:Do not connect the USB cable until the installation software prompts you to connect it.
CD installation
Windows
1.Quit all open programs on the computer.
2. Install the software from the CD, and follow the onscreen instructions.
3. When prompted, select the Connected directly to the computer option, and then click the
Install  button.
4. When the software prompts...

4.When the software prompts you, connect the USB cable to the product and the computer.
5.To configure the product software to recognize the installed accessories, complete these steps:
Mac OS X 10.41.
From the Apple menu , click the  System Preferences  menu and then
click the  Print & Fax  icon.
2. Click the Printer Setup  button.
3. Click the Installable Options  menu.
Mac OS X 10.5 and 10.6 1.
From the Apple menu , click the  System Preferences  menu and then
click the  Print & Fax  icon.
2. Select...

Table 5-1  Printing
Service nameDescription
port9100 (Direct Mode)Printing service
Line printer daemon (LPD)Printing service
Advanced LPD (custom LPD queues)Protocol and programs associated with line-printer spooling
services installed on TCP/IP systems.
FTPTCP/IP utility for transferring data between systems.
WS PrintUses the Microsoft Web Services for Devices (WSD) Print
services on the HP Jetdirect print server.
WS Discovery Allows Microsoft WS discovery protocols on the HP Jetdirect
print server....

Service nameDescription
BOOTP (Bootstrap Protocol)For automatic IP address assignment. The BOOTP server
provides the product with an IP address. Requires the
administrator to input a products MAC hardware address on
the BOOTP server for the product to obtain an IP address from
that server.
Auto IPFor automatic IP address assignment. If neither a DHCP
server nor a BOOTP server is present, the product uses this
service to generate a unique IP address.
Table 5-5   Security features
Service nameDescription...

Install the product on a wired network
Configure the IP address
1.Connect the network cable to the product and to the network.
2.Wait for 60 seconds before continuing. During this time, the network recognizes the product and
assigns an IP address or host name for the product.
3. At the product control panel, press the  Home button 
.
4. Press the down arrow 
 to highlight the  INFORMATION menu, and then press the  OK button.
5. Press the down arrow 
 to highlight the  PRINT CONFIGURATION  menu, and then...

Install the software
Windows1.Quit all programs on the computer.
2. Install the software from the CD.
3. Follow the onscreen instructions.
4. When prompted, select the  Connected via the Network  option, and then click the Install button.
5. From the list of available printers, select the printer that has the correct IP address.
6. Click the Finish  button.
7. On the Additional Options  screen, you can install more software, or click the  Exit button.
8. Print a page from any program to make sure that...

Mac OS X 10.41.From the Apple menu , click the  System Preferences  menu and then
click the  Print & Fax  icon.
2. Click the  Printer Setup  button.
3. Click the  Installable Options  menu.
Mac OS X 10.5 and 10.6 1.
From the Apple menu , click the  System Preferences  menu and then
click the  Print & Fax  icon.
2. Select the product in the left side of the window.
3. Click the  Options & Supplies button.
4. Click the  Driver tab.
5. Configure the installed options.
NOTE: For Mac OS X 10.5 and 10.6, the...

Configure network settings
View or change network settings
Use the embedded Web server to view or change IP configuration settings.
1.Print a configuration page, and locate the IP address.
●If you are using IPv4, the IP address contains only digits. It has this format:
xxx.xxx.xxx.xxx
● If you are using IPv6, the IP address is a hexadecimal combination of characters and digits.
It has a format similar to this:
xxxx::xxxx:xxxx:xxxx:xxxx
2. To open the embedded Web server, type the IP address into the...

Manually configure IPv4 TCP/IP parameters from the control panel
Use the control-panel menus to manually set an IPv4 address, subnet mask, and default gateway.
1.Press the  Home button 
.
2. Open each of the following menus. Press the down arrow 
 to highlight it and then press the  OK
button to select it.
a. CONFIGURE DEVICE
b. I/O
c. EMBEDDED JETDIRECT MENU
d. TCP/IP
e. IPV4 SETTINGS
f. CONFIG METHOD
g. MANUAL
h. MANUAL SETTINGS
i. IP ADDRESS , SUBNET MASK , or DEFAULT GATEWAY
3. Press the up arrow...

Manually configure IPv6 TCP/IP parameters from the control panel
Use the control-panel menus to manually set an IPv6 address.
1.Press the  Home button 
.
2. Open each of the following menus. Press the down arrow 
 to highlight it and then press the  OK
button to select it.
a. CONFIGURE DEVICE
b. I/O
c. EMBEDDED JETDIRECT MENU
d. TCP/IP
e. IPV6 SETTINGS
f. ADDRESS
g. MANUAL SETTINGS
h. ENABLE
i. ON
j. ADDRESS
3. Press the up arrow 
 or the down arrow  to select the first character of the address. Press...