HP Color LaserJet Enterprise CP4025dn User Manual

Menu itemSub-menu itemValuesDescription
 COLOR CARTRIDGESSTOP
PROMPT TO CONTINUE*
CONTINUE
PRINT IN BLACKSelect what the product should
do when the print cartridge is very
near the end of its estimated life.
STOP: The product stops until
you replace the cartridge.
PROMPT TO CONTINUE: The
product stops until you clear the
prompt message.
CONTINUE : The product
provides an alert message, but it
continues printing.
PRINT IN BLACK : The product
prints in black when a color
cartridge is near the end of its...

Menu itemSub-menu itemValuesDescription
USER DEFINED LOWYELLOW CARTRIDGE
MAGENTA CARTRIDGE
CYAN CARTRIDGE
BLACK CARTRIDGERange from 0–100%Use the arrow buttons to enter
the percentage of estimated
cartridge life at which you want
the product to alert you that the
cartridge is low.
 TRANSFER KITRange from 0–100%
Default is 2%Use the arrow buttons to enter
the percentage of estimated
cartridge life at which you want
the product to alert you.
 FUSER KITRange from 0–100%
Default is 2%Use the arrow buttons to...

Menu itemSub-menu itemValuesDescription
RESTRICT COLOR USE ENABLE COLOR*
COLOR IF ALLOWED
DISABLE COLORThis menu item controls the
authorization of color printing.
DISABLE COLOR : All jobs sent
to the product print only in
monochrome.
ENABLE COLOR: All color
pages sent to the product print in
color.
COLOR IF ALLOWED : A
permissions database is
referenced to verify if color pages
are printed in color or
monochrome.
COLOR/BLACK MIX  AUTO*
MOSTLY COLOR PAGES
MOSTLY BLACK PAGES These menu selections allow...

Menu itemSub-menu itemValuesDescription
COPIES Range: 1 - 32000Allows you to set the default
number of copies for print jobs.
The default number is 1.
DEFAULT PAPER SIZE A list of available sizes
appears. See 
Supportedpaper sizes on page 83.
Allows you to set the default
paper size.
DEFAULT CUSTOM PAPER
SIZE● UNIT OF MEASURE
● X DIMENSION
● Y DIMENSION Allows you to set the default size
for any custom print job that
does not specify the dimensions.
The default unit of measure is
MILLIMETERS.
DUPLEX OFF...

Menu itemSub-menu itemValuesDescription
PRINT PS ERRORS OFF*
ONAllows you to select to print PS
error pages.
PRINT PDF ERRORS  OFF*
ON Allows you to select to print PDF
error pages.
PCL sub-menu
This menu configures settings for the printer control language.
To display:  Press the Home button 
, select the  CONFIGURE DEVICE  menu, select the PRINTING
menu, and then select the  PCL menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default....

ItemValuesDescription
SUPPRESS BLANK PAGESNO*
YESWhen generating your own PCL, extra form feeds are
included that would cause a blank page to be printed. Select
YES for form feeds to be ignored if the page is blank.
MEDIA SOURCE MAPPING STANDARD *
CLASSIC The PCL5 MEDIA SOURCE MAPPING
 command selects an
input tray by a number that m aps to the various available
trays and feeders.
● The 
STANDARD  numbering is based on newer
HP LaserJet printers with updated changes to the
numbering of trays and...

Print Quality menu
To display: Press the Home button , select the  CONFIGURE DEVICE  menu, and then select the
PRINT QUALITY  menu.
NOTE:Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
ItemSub-itemSub-itemValuesDescription
ADJUST COLORHIGHLIGHTSCYAN DENSITY
MAGENTA
DENSITY
YELLOW DENSITY
BLACK DENSITYRange from +5 to
–5. Default is 0.Adjust the darkness or lightness of highlights
on a printed page. Lower values represent
lighter highlights on a printed...

ItemSub-itemSub-itemValuesDescription
  X1 SHIFT
Y1 SHIFT
X2 SHIFT
Y2 SHIFTRange: -5 mm to
+5 mmThe scan direction is referred to as X. X1 is
the scan direction for a single-sided page or
for the second side of a two-sided page. X2
is the scan direction for the first side of a two-
sided page.
The feed direction is referred to as Y. Y1 is
the feed direction for a single-sided page or
for the second side of a two-sided page. Y2
is the feed direction for the first side of a two-
sided page.
AUTO SENSE...

ItemSub-itemSub-itemValuesDescription
ADJUST PAPER
TYPESA list of paper types
displays.PRINT MODE
RESISTANCE
MODE
HUMIDITY MODE
PRE-ROTATION
MODE
FUSER TEMP
MODE
PAPER CURL
MODEA list of print modes
displays.Configure the print mode that is associated
with each media type.
 RESTORE MODES  Use this feature to return all paper type-
mode settings to the factory-default settings.
OPTIMIZEA list of available
options displays.  Allows you to optimize various print modes
to address print quality issues....

ItemSub-itemSub-itemValuesDescription
EDGE CONTROL  OFF
LIGHT
NORMAL*
MAXIMUMThe Edge Control setting determines how
edges are rendered. Edge control has two
components: adaptive halftoning and
trapping. Adaptive halftoning increases
edge sharpness. Trapping reduces the
effect of color-plane misregistration by
overlapping the edges of adjacent objects
slightly.
● OFF turns off both trapping and
adaptive halftoning.
● LIGHT
 sets trapping at a minimal level,
and adaptive halftoning is on.
● NORMAL
 is the...