HP Color LaserJet Enterprise CP4025dn User Manual

ItemSub-itemSub-itemSub-itemDescription
  SNMP TESTYES
NO*This test checks operation of SNMP
communications by accessing predefined
SNMP objects on the product.
Select  YES to choose this test, or  NO to not
choose it.
  DATA PATH TESTYES
NO *This test helps to identify data path and
corruption problems on an HP postscript level
3 emulation product. It sends a predefined PS
file to the product, However, the test is
paperless; the file will not print.
Select  YES to choose this test, or  NO to not
choose...

ItemSub-itemSub-itemSub-itemDescription
  PRINT RESULTSYES
NO*If the ping test was not set for continuous
operation, you can choose to print the test
results. Select  YES to print results. If you
select  NO, results are not printed.
  EXECUTEYES
NO*Specify whether to initiate the ping test.
Select  YES to initiate the test, or  NO to not
run the test.
 PING RESULTS  Use this item to view the ping test status and
results using the control panel display. You
can select the following items:
  PACKETS SENT...

ItemSub-itemSub-itemSub-itemDescription
   AUTO*The print server uses auto-negotiation to
configure itself with the highest link speed
and communication mode allowed. If auto-
negotiation fails, either  100TX HALF or 10T
HALF  is set depending on the detected link
speed of the hub/switch port. (A 1000T half-
duplex selection is not supported.)
   10T HALF10 Mbps, half-duplex operation.
   10T FULL10 Mbps, full-duplex operation.
   100TX HALF100 Mbps, half-duplex operation.
   100TX FULL100 Mbps,...

Resets menu
The RESETS  menu allows you to reset factory settings, and disable or enable sleep mode.
To display: Press the  Home button 
, select the  CONFIGURE DEVICE  menu, and then select the
RESETS  menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
ItemSub-itemValuesDescription
RESTORE FACTORY
SETTINGS  Allows you to clear the page
buffer, remove all perishable
personality data, reset the
printing environment, and return
most settings to...

ItemSub-itemValuesDescription
PAPER PATH SENSORS  Performs a test on each of the
product’s sensors to determine if
they are working correctly and
displays the status of each sensor.
PAPER PATH TEST  Tests the paper-handling features
of the product, such as the
configuration of the trays.
 PRINT TEST PAGE Generates a page for testing the
paper-handling features. You must
define the path for the test in order
to test specific paper paths.
 SOURCEALL TRAYS
TRAY 1
TRAY 2*
TRAY 3
TRAY 4
TRAY 5Specifies...

ItemSub-itemValuesDescription
COLOR BAND TESTPRINT TEST PAGE Prints a color band test page that is
used to identify arcing in the high-
voltage power supply.
 COPIES Range is 1 to 30. The default value
is 1.Specify how many copies of the
internal page are printed.
Service menu
The 
SERVICE  menu is locked and requires a PIN for access. This menu is intended for use by authorized
service personnel.
42 Chapter 2   Control panel menus ENWW
 

3 Software for Windows
●Supported operating systems for Windows
●
Supported printer drivers for Windows
●
Select the correct printer driver for Windows
●
Priority for print settings
●
Change printer-driver settings for Windows
●
Remove software for Windows
●
Supported utilities for Windows
●
Software for other operating systems
ENWW 43
 

Supported operating systems for Windows
The product supports the following Windows operating systems:
●Windows XP (32-bit and 64-bit)
● Windows Server 2003 (32-bit and 64-bit)
● Windows Server 2008 (32-bit and 64-bit)
● Windows Vista (32-bit and 64-bit)
● Windows 7 (32-bit and 64-bit)
44 Chapter 3   Software for Windows ENWW
 

Supported printer drivers for Windows
●HP PCL 6 (this is the default printer driver)
● HP postscript emulation Universal Print Driver (HP UPD PS)
● HP PCL 5 Universal Print Driver (HP UPD PCL 5)
The printer drivers include online Help that has instructions for common printing tasks and also describes
the buttons, checkboxes, and drop-down lists that are in the printer driver.
NOTE: For more information about the UPD, see www.hp.com/go/upd.
ENWW Supported printer drivers for Windows 45
 

Select the correct printer driver for Windows
Printer drivers provide access to the product features and allow the computer to communicate with the
product (using a printer language). The following printer drivers are available at 
www.hp.com/go/
cljcp4025_software or www.hp.com/go/cljcp4525_software .
HP PCL 6 driver●Provided as the default driver. This driv
er is automatically installed unless you
select a different one.
● Recommended for all Windows environments
● Provides the overall bes
t speed,...