HP Color LaserJet CM3530fs MFP User Manual

Supported paper and print media sizes
This product supports a number of paper sizes, and it adapts to various media.
NOTE:To obtain best results, select the correct paper size and type in the printer driver before printing.
Table 6-1   Supported paper and print media sizes
Size and dimensionsTray 1Tray 2Tray 3 (optional)
Letter
216 x 279 mm (8.5 x 11 in)
Legal
216 x 356 mm (8.5 x 14 in) 
A4
210 x 297 mm (8.27 x 11.69 in)
RA4
215 x 305 mm (8.5 x 12.0 in) 
A5
148 x 210 mm (5.83 x 8.27 in)
B5 (JIS)
182 x...

Size and dimensionsTray 1Tray 2Tray 3 (optional)
184 x 260 mm (7.2 x 10.2 in)
16K
195 x 270 mm (7.7 x 10.6 in)
16K
197 x 273 mm (7.8 x 10.8 in)
8.5 x 13
216 x 330 mm (8.5 x 13 in) 
Envelope Commercial #10
105 x 241 mm (4.13 x 9.49 in)  
Envelope #9
100 mm x 226 mm (3.9 x 8.9 in)  
Envelope B5
176 x 250 mm (6.93 x 9.84 in)  
Envelope C5 ISO
162 x 229 mm (6.93 x 9.84 in)  
Envelope C6
114 x 162 mm (4.49 x 6.38 in)  
Envelope DL ISO
110 x 220 mm (4.33 x 8.66 in)  
Envelope Monarch
98 x 191 mm (3.9 x 7.5 in)...

Custom paper sizes
This product supports a variety of custom paper sizes. Supported custom sizes are sizes that are within
the minimum- and maximum-size guidelines for the product but are not listed in the supported paper
sizes table. When using a supported custom size, specify the custom size in the print driver, and load
the paper in a tray that supports custom sizes.
ENWW Custom paper sizes 89
 

Supported paper and print media types
For a complete list of specific HP-brand paper that this product supports, go to www.hp.com/support/
cljcm3530mfp.
Paper typeTray 1Tray 2Tray 3 (optional)
Plain Paper
Light 60–74 g/m2
Midweight (96–110 g/m2)
Heavy (111–130 g/m2)
Extra Heavy (131–175 g/m2) 
Color Transparency
Labels 
Letterhead
Preprinted
Prepunched
Colored
Rough
Bond
Recycled
Envelope  
Cardstock 
Mid-weight glossy (96–110 g/m2)
Heavy glossy (111–130 g/m2)
Extra-heavy glossy (131–175 g/m2)
Card...

Tray and bin capacity
Tray or binPaper typeSpecificationsQuantity
Tray 1PaperRange:
60 g/m
2 (16 lb) bond to 220 g/m2
(59 lb) bond
Maximum stack height: 10 mm
(0.39 in)
Equivalent to 100 sheets of 75
g/m
2 (20 lb) bond
EnvelopesLess than 60 g/m2 (16 lb) bond to
90 g/m2 (24 lb) bond
Up to 10 envelopes
LabelsMaximum 0.102 mm (0.004 in)
thickMaximum stack height: 10 mm
(0.39 in)
TransparenciesMinimum 0.102 mm (0.004 in)
thickMaximum stack height: 10 mm
(0.39 in)
Up to 50 sheets
Glossy paperRange:
96 g/m
2...

Special paper or print media guidelines
This product supports printing on special media. Use the following guidelines to obtain satisfactory
results. When using special paper or print media, be sure to set the type and size in your print driver to
obtain the best print results.
CAUTION:HP LaserJet printers use fusers to bond dry toner particles to the paper in very precise
dots. HP laser paper is designed to withstand this extreme heat. Using inkjet paper not designed for this
technology could damage...

Load paper and print media
You can load different media in the trays and then request media by type or size by using the control
panel.
Paper orientation for loading trays
If you are using paper that requires a specific orientation, load it according to the information in the
following tables.
NOTE:The Alternative Letterhead Mode  setting affects the way you load letterhead or preprinted
paper. This setting is turned off by default. For more information, see 
Device Behavior menu
on page 44.
ENWW Load...

Tray 1
Paper typeImage orientationDuplex modeHow to load paper
Alternative Letterhead Mode =
OffHow to load paper
Alternative Letterhead Mode =
On
Preprinted or
letterheadPortrait1-sided printingFace down
Top edge leading into the productFace up
Bottom edge leading into the
product
2-sided printingFace up
Bottom edge leading into the
productFace up
Bottom edge leading into the
product
Landscape1-sided printingFace down
Top edge toward the back of the
productFace up
Top edge toward the back of the...

Paper typeImage orientationDuplex modeHow to load paper
Alternative Letterhead Mode =
OffHow to load paper
Alternative Letterhead Mode =
On
EnvelopesLong edge of the
envelope feeding into
the product1-sided printingFace down
Top edge leading into the productNot applicable
Short edge of the
envelope feeding into
the product 1-sided printing Face down
Top edge toward the back of the
productNot applicable
ENWW Load paper and print media 95
 

Tray 2 or optional Tray 3
Paper typeImage orientationDuplex modeHow to load paper
Alternative Letterhead Mode =
OffHow to load paper
Alternative Letterhead Mode =
On
Preprinted or
letterheadPortrait1-sided printingFace up
Top edge at the right side of the
trayFace down
Top edge at the left side of the
tray
2-sided printingFace down
Top edge at the left side of the
trayFace down
Top edge at the left side of the
tray
Landscape1-sided printingFace up
Top edge toward the back of the
productFace down
Top edge...