HP Color LaserJet 2600n User Manual

Service and support
Hewlett-Packard limited warranty statement
HP PRODUCT
HP Color LaserJet 2600nDURATION OF LIMITED WARRANTY
1 year, Limited Warranty
HP warrants to you, the end-user customer, that HP  hardware and accessories will be free from defects in
materials and workmanship after the date of purchase, for  the period specified above. If HP receives notice of
such defects during the warranty period, HP will, at its  option, either repair or replace products which prove to be
defective....

THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAW\
FULLY
PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY
STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU.
132 Appendix B  Service and support ENWW
 

Print Cartridge Limited Warranty Statement
This HP product is warranted to be free from defects in materials and workmanship.
This warranty does not apply to  products that (a) have been refilled, refurbished,
remanufactured or tampered with in any  way, (b) experience problems resulting from
misuse, improper storage, or operation outside  of the published environmental specifications
for the printer product or (c) exhibit wear from ordinary use.
To obtain warranty service, please return the  product to...

Availability of support and service
Around the world, HP provides a variety of service and support options for purchase.
Availability of these programs will  vary depending upon your location.
HP Care Pack™ Services and Service Agreements
HP has various service and support options that  meet a wide range of needs. These options
are not part of the standard warranty. Support services may vary by loca\
tion. For most
printers HP offers both in-warranty and  post-warranty HP Care Pack Services and Service...

Repacking the printer
If your printer needs to be moved or shipped to another location, perform the following
procedure to repack the printer.
CAUTION
Shipping damage as a result of inadequate  packing is the customers responsibility. To
ensure proper protection during shipment, the printer  must be repackaged properly using the
original cushions.
To repack the printer
CAUTIONIt is  extremely important  to remove the print cartridges  before shipping the printer. Print
cartridges left in the printer...

Service information form
WHO IS RETURNING THE EQUIPMENT?Date:
Person to contact:Phone:
Alternate contact:Phone:
Return shipping address:
 
 Special shipping instructions:
WHAT ARE YOU SENDING?
Model name:Model number:Serial number:
Please attach any relevant printouts. Do NOT ship accessories (manuals, cleaning supplies, and so on) that are not
required to complete the repair.
HAVE YOU REMOVED THE PRINT CARTRIDGES?
You must remove them before shipping the printer,  unless a mechanical problem prevents...

Specifications
Printer specifications
Physical specifications
ProductHeightDepthWidthWeight
HP Color
LaserJet 2600n
printer without
optional Tray 3 or
consumables370 mm
(14.6 in)453 mm
(17.83 in)407 mm
(16.02 in)15.67 kg
(34.54 lbs)
HP Color
LaserJet 2600n
printer with
optional Tray 3
(250-sheet),
without
consumables460 mm
(18.1 in)451 mm
(17.76 in)482 mm
(18.98 in)20.16 kg
(44.43 lbs)
Supplies specifications
Print-cartridge life (based on approximately 5%
coverage)
each (HP Color LaserJet 2600n...

Item110-Volt models220-Volt models
Heat output
Ready Mode55 BTU/hour55 BTU/hour
Rated current3.6 Amps2.5 Amps
CAUTIONPower requirements are based on the country/region where the printer is sold. Do not
convert operating voltages. This will damage the  printer and void the product warranty.
Environmental specifications
Recommended1Operating1Storage1
(printer and print
cartridge)
Temperature20° to 27°C
(68° to 81°F)15° to 32.5°C
(59° to 90.5°F)-20° to 40°C
(-4° to 104°F)
Relative humidity20% to 70%10% to...

Regulatory information
Introduction
This section contains the following regulatory information:
●
FCC regulations
●
Environmental Product Stewardship program
●
Material safety data sheet
●
Declaration of conformity
●
Laser safety statement
●
Canadian DOC statement
●
Korean EMI statement
●
VCCI statement (Japan)
●
Finnish laser statement
ENWW Introduction139
 

FCC regulations
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC  rules. These limits are designed to provide
reasonable protection against harmful interference  in a residential installation. This
equipment generates, uses, and can radiate radio  frequency energy. If this equipment is not
installed and used in accordance with the  instructions, it may cause harmful interference to
radio communications. However, there is no...