HP CM8060 User Manual

Electrical specifications
WARNING!Power requirements are based on the country/r egion where the device is installed. Do
not convert operating voltages, which could damage the device.
Table A-3   Electrical specifications
Power requirements 110–127 VAC nominal (+6%, -10%), 20 A, 50–60 Hz
120 V~ 16 A, 60 Hz
200–240 VAC nominal (+6%, -10%), 10 A, 50–60 Hz (USA and Canada)
NOTE: Connect only to a dedicated circuit.
Table A-4   Power consumption (average, in watts)1
ModelActive2Sleep
HP CM8060 Color MFP with...

Acoustic specifications
Table A-5  Acoustic emissions
Sound Power LevelDeclared per ISO 9296
Printing/CopyingLWAd = 7.3 Bels (A) [73 dB(A)]
ReadyLWAd = 5.2 Bels (A) [52 dB(A)]
Sound Pressure Level (bystander position)Declared per ISO 9296
Printing/CopyingLpAm = 57 dB(A)
Ready LpAm = 33 dB(A)
1Values subject to change. See www.hp.com/support/CM8060edgeline  or www.hp.com/support/CM8050edgeline for current
information.
258 Appendix A   Specifications ENWW
 

Environmental specifications
ConditionRecommended for
operatingMaximum for operatingStorage
Temperature15 to 25°C (59 to 77°F)10 to 30°C (50 to 86°F)-40 to 60°C (-40 to 140°F)
Humidity 40 to 55% RH, non-condensing20 to 80% RH, non-
condensingless than 90% RH, non-
condensing
ENWW Environmental specifications 259
 

260 Appendix A   Specifications ENWW
 

B Worksheets
Print the pages in this appendix, and fill in the information for your reference.
●
HP Support information sheet
●
Digital-send setup worksheet
●
Security configuration checklist
ENWW 261
 

HP Support information sheet
Table B-1  HP Support information sheet
HP sales representative name 
HP sales representative phone number 
HP-authorized support representative name 
HP-authorized support representative phone number 
262 Appendix B   Worksheets ENWW
 

Digital-send setup worksheet
If you would like the HP-authorized support representative to assist you with setting up the digital-send
features, print these pages, fill out the information, and give them to the representative. To find some
information, you might need to contact other administrators within your organization.
If you set up the digital-send features without the he lp of the HP-authorized support representative, you
can use this page to record the necessary information for setting up these...

LAN Fax
If you want the HP-authorized support
representative to assist you with setting
up this feature, provide the information in
this section.
Contact the network administrator for
your organization if you need to find this
information.What is the IP address or server name
for the LAN Fax server? 
What is the path to the folder on the LAN
Fax server where the device should send
the scanned images? (Use UNC format.) 
What is the domain for the LAN Fax
server? 
What are the username and password
that...

Internet Fax
If you want the HP-authorized support
representative to assist you with setting
up this feature, provide the information in
this section.
Contact the network administrator for
your organization and the Internet Fax
service provider if you need to find this
information. What is the domain name for the Internet
Fax service provider? 
What e-mail address do you want to use
for the default “from” address? 
Do you want to use the e-mail address
for the user who is signed in as the “Sent
from...

Security configuration checklist
This device has a security configuration checklist that is approved by the National Institute of Standards
and Technology (NIST), which is a U.S. government organization. A security configuration checklist is
a document that contains instructions or procedures  for configuring an IT product to a baseline level of
security.
You can download the checklist for this device from this Web site: 
www.hp.com/go/secureprinting . Click
the link for  Configuration checklists ,...