HP C4280 User Manual

							
Chapter 7
48 Print from your computer
Print
 
						

							
8 Use the photo features
The HP All-in-One is equipped with memory card slots which enable you to insert a
memory card and begin printing photos from your digital camera without uploading your
photos to a computer first. Additionally, if the HP All-in-One is connected to a computer
with a USB cable, you can also transfer your photos to the computer to print, edit, or
share.
The HP All-in-One supports the memory cards described below. Each type of memory
card can only be inserted in the appropriate slot for that card.
CAUTION:Do not insert more than one memory card at a time. If more than one
memory card is inserted, unrecoverable data loss might occur.
1xD-Picture Card
2Memory Stick or Memory Stick Duo  (adapter optional, but not necessary)
3Secure Digital (SD) or MultiMediaCard (MMC)
4CompactFlash (CF)
The memory card area also has a Photo light. This light blinks green when a memory
card is being read or when an image is being printed from a card, and stays solid green
when images are ready to be viewed. The Photo light is located near the memory card
slots (below the camera icon).
NOTE:Do not pull out the memory card while the Photo light is flashing. A flashing
light means the HP All-in-One is accessing the memory card. Wait until the light
remains solid. Removing a memory card while it is being accessed might corrupt
information on the card or damage the HP All-in-One and card.
Use the photo features 49
Photos
 
						

							
This section contains the following topics:
•
Print photos
•
Save photos to your computer
•
Edit photos using your computer
•
Share photos with friends and relatives
Print photos
The HP All-in-One enables you to print one borderless or bordered photo per page directly
from your memory card, without first having to transfer the files to a computer.
The HP All-in-One is set to detect the type and size of paper you are using automatically.
This section contains the following topics:
•
Print 10 x 15 cm (4 x 6 inch) photos
•
Print enlargements
•
Print photos from the HP Photosmart Software
Print 10 x 15 cm (4 x 6 inch) photos
You can select specific photos on your memory card to print as 10 x 15 cm (4 x 6 inch)
photos.
To print one or more 10 x 15 cm (4 x 6 inch) photos
1. Insert your memory card into the appropriate slot on the HP All-in-One.
The most recent image on the card appears on the display.
2.Load 10 x 15 cm (4 x 6 inch) photo paper in the input tray.
3. Press the buttons next to the 
 and  icons on the display to scroll through the photos
on your memory card until the photo you want to print appears.
4. Do one of the following:
• For faster printing with slightly reduced resolution, leave the  Quality setting at
best resolution (as indicated by the two star icons on the display).
• For maximum reso lution, press the Quality button until three star icons appear
on the display.
5. Leave the default  Size setting as  Borderless .
Chapter 8
50 Use the photo features
Photos
 
						

							
6.Press the  Copies button until the number of copies you want to print appears on the
display.
7. Press the  Print button.
TIP: While the photo is printing, you can continue scrolling through the photos
on your memory card. When you see a photo you want to print, you can press
the  Print  button to add that photo to the print queue.
Print enlargements
You can print enlargements of the photos on your memory card on either letter or A4
paper.
To print an enlargement of a photo
1.Insert your memory card into the appropriate slot on the HP All-in-One.
The most recent image on the card appears on the display.
2.Load letter-size or A4 photo paper in the input tray.
3. Press the buttons next to the 
 and  icons on the display to scroll through the photos
on your memory card until the photo you want to print appears.
4. Do one of the following:
• For faster printing with slighty reduced resolution, leave the  Quality setting at best
resolution (as indicated by the two star icons on the display).
• For maximum resolution, press the  Quality button until three star icons appear
on the display.
5. Do one of the following:
• Press the  Size button until  Resize to Fit  is the selected se tting on the display.
Your printed photo will be enlarged and centered to fit the printable area of the
page, and will be either bordered or borderless on all four sides depending on the
aspect ratios of the digital photo and the paper on which youre printing.
• Leave the default  Size setting as  Borderless .
Your printed photo will be enlarged to fill the entire page size and will be
borderless. This could result in some of the image being cropped.
6. Press the  Copies button until the number of copies you want to print appears on the
display.
7. Press the  Print button.
TIP: While the photo is printing, you can continue scrolling through the photos
on your memory card. When you see a photo you want to print, you can press
the  Print  button to add that photo to the print queue.
Print photos 51
Photos
 
						

							
Print photos from the HP Photosmart Software 
You can use the HP Photosmart Software installed on your computer to transfer photos
from a memory card to your computer’s hard drive for advanced photo editing, sharing
photos online, and printing from your computer.
Before transferring photos to your computer, you need to remove the memory card from
your digital camera and insert it in the appropriate memory card slot on the HP All-in-One.
NOTE:The HP All-in-One must be connected to a computer that has the
HP Photosmart Software installed on it.
To print photos
1. Insert a memory card into the appropriate slot on the HP All-in-One.
The software opens on your computer.
2. Click  Print, and then follow the onscreen prompts to transfer your photos to the
computer for printing.
Save photos to your computer
You can use the HP Photosmart Software installed on your computer to transfer photos
from a memory card to your computer’s hard drive for advanced photo editing, sharing
photos online, and printing from your computer.
Before transferring photos to your computer, you need to remove the memory card from
your digital camera and insert it in the appropriate memory card slot on the HP All-in-One.
NOTE: The HP All-in-One must be connected to a computer that has the
HP Photosmart Software installed on it.
To save photos
1. Insert a memory card into the appropriate slot on the HP All-in-One.
The software opens on your computer.
2. Click  Save, and then follow the onscreen prompts on your computer to save the
photos to your computer.
Edit photos using your computer
You can use the HP Photosmart Software installed on your computer to transfer photos
from a memory card to your computer’s hard drive for advanced photo editing, sharing
photos online, and printing from your computer.
Before transferring photos to your computer, you need to remove the memory card from
your digital camera and insert it in the appropriate memory card slot on the HP All-in-One.
NOTE: The HP All-in-One must be connected to a computer that has the
HP Photosmart Software installed on it.
Chapter 8
52 Use the photo features
Photos
 
						

							
To edit photos
1.Insert a memory card into the appropriate slot on the HP All-in-One.
The software opens on your computer.
2. Click  View, and then follow the onscreen prompts to transfer your photos to the
computer for viewing and editing.
Share photos with fr iends and relatives
You can use the HP Photosmart Software installed on your computer to transfer photos
from a memory card to your computer’s hard drive for advanced photo editing, sharing
photos online, and printing from your computer.
Before transferring photos to your computer, you need to remove the memory card from
your digital camera and insert it in the appropriate memory card slot on the HP All-in-One.
NOTE:The HP All-in-One must be connected to a computer that has the
HP Photosmart Software installed on it.
To share photos
1. Insert a memory card into the appropriate slot on the HP All-in-One.
The software opens on your computer.
2. Click  Share , and then follow the onscreen prompts to transfer your photos to the
computer for sharing with friends and relatives.
HP Photosmart Share lets you share photos with friends and family by sending photos
as e-mail, uploading photos to an online photo album, or ordering prints through an
online photo-finishing service.
Share photos with friends and relatives 53
Photos
 
						

							
Chapter 8
54 Use the photo features
Photos
 
						

							
9 Use the copy features
The HP All-in-One allows you to produce high-quality color and black-and-white copies
on plain or photo paper. You can enlarge or reduce the size of an original to fit a specific
paper size, adjust the copy quality, and make high-quality copies of photos, including
borderless copies.
This section contains the following topics:
•
Make a copy
•
Change copy speed or quality
•
Make multiple copies of the same original
•
Make a borderless copy of a photo
•
Resize an original to fit onto letter or A4 paper
•
Stop copying
Make a copy
You can make quality copies from the control panel.
To make a copy from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press  Start Copy Black  or Start Copy Color  to begin copying.
Change copy speed or quality
The HP All-in-One, provides three options, indicated by one, two, or three stars, that affect
copy speed and quality:
•One star copies faster than the other two quality settings. On plain paper, the text is
comparable to the quality of two stars, but the graphics might be of lower quality. This
setting uses less ink and extends the life of your print cartridges.
NOTE: This setting is not available when the HP All-In-One detects photo paper.
•Two stars delivers high-quality output and is the recommended setting for most of
your copying. Two stars copies faster than the three stars quality setting.
• Three stars produces the highest quality output for all paper and eliminates the
banding (striping) effect that sometimes  occurs in solid areas. Three stars copies
slower than the other quality settings.
To change the copy quality
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press  Quality  to select one star, two stars, or three stars.
4. Press  Start Copy Black  or Start Copy Color .
Use the copy features 55
Use the copy features
 
						

							
Make multiple copies of the same original
You can set the number of copies from the control panel of the HP All-in-One or from the
HP Photosmart Software. This task explains how to set the number of copies from the
control panel only.
NOTE:For information on initiating copies from the software, see the software
portion of the  HP Photosmart  Software Help.
To make multiple copies of an original from the control panel
1.Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press the  Copies button to increase the number of copies. When you reach the
maximum, the setting  returns to 1 copy.
TIP:Use the software that you installed with the HP All-in-One to set the number
of copies higher than supported from the control panel. When the number of
copies is greater than 9, only the last digit of the number of copies is displayed on
the control panel.
4. Press  Start Copy Black  or Start Copy Color .
In this example, the HP All-in-One makes six copies of the original 10 x 15 cm (4 x 6
inch) photo.
Related topics
“
Use the HP Photosmart software” on page 9
Make a borderless co py of a photo
For the best quality when copying a photo, load photo paper in the input tray.
TIP:You can optimize the quality of the color photos you print and copy with the
HP All-in-One by purchasing a photo print cartridge. Remove the black print cartridge
and insert the photo print cartridge in its place. With the tri-color print cartridge and
photo print cartridge installed, you have  a six-ink system, which provides enhanced
quality color photos.
Chapter 9
56 Use the copy features
Use the copy features
 
						

							
To make a borderless copy of a photo from the control panel
1.Load photo paper in the input tray.
NOTE: The HP All-in-One automatically detects the type of paper you are using.
If you do not use photo paper, your copy  will include a white border around one
or more edges.
2. Load your original photo print side down on the right front corner of the glass.
3. Press  Size to select  Borderless .
4. Press  Start Copy Color .
The HP All-in-One makes a borderless copy  of your original photo, as shown below.
Resize an original to fit onto letter or A4 paper
You can use the Resize to Fit feature to copy an original to fit within the printable margins
of a page without the risk of cropping some of your original. This is useful for reducing or
enlarging an original. For example:
• If you enlarge a 10 x 15 cm (4 x 6 inch) photo to make a borderless full-size copy on
letter or A4 paper, some part of your photo will be cropped. The  Resize to Fit feature
will enlarge the photo as much as possible to fit the page without cropping any of your
photo.
• If the image or text on your original fills the entire sheet of paper with no margins, you
can use the  Resize to Fit  feature to reduce your original and prevent unwanted
cropping of the text or images at the edges of the sheet.
NOTE: In order to resize your original with out changing the proportions or cropping
the edges, the HP All-in-One might leave an uneven amount of white space around
the edges of the paper.
To resize a document from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press the  Size button to select  Resize to Fit.
4. Press  Start Copy Black  or Start Copy Color .
Resize an original to fit onto letter or A4 paper 57
Use the copy features