HP 6500 A Manual

Solution 2: Check the layout of the documentSolution: Make sure the layout of the document you are trying to print fits on a paper
size supported by the product.
To preview the print layout
1. Load the correct paper size into the input tray.
2. Preview your print job before sending it to the product.
In most software applications, click the  File menu, and then click  Print Preview.
3. Check the graphics in the document to make sure that the current size fits within
the printable area of the product.
4....

A blank page came out while printing
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.
•
Solution 1: Remove any extra pages or lines at the end of the document
•
Solution 2: Load paper in the input tray
•
Solution 3: Che ck the ink levels
•
Solution 4: Clean the printhead
•
Solution 5: Load paper in the input tray...

Solution 5: Load paper in the input traySolution: If the product has only a few sheets remaining, load more paper in the
input tray. If there is plenty of paper in the input tray, remove the paper, tap the stack
of paper against a flat surface, and reload the paper into the input tray.
For more information, see:
Load media
Cause: The product picked up two sheets of paper.
Print quality troubleshooting
Use this section to solve these print quality problems:
•
Wrong, inaccurate, or bleeding colors
•
Ink...

Solution 1: Make sure you are using genuine HP ink cartridgesSolution: Check to see if your ink cartridges are genuine HP ink cartridges.
HP recommends that you use genuine HP ink cartridges. Genuine HP ink cartridges
are designed and tested with HP printers to help you easily produce great results,
time after time.
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product
service or repairs required as a result of  using a non-HP supply will not be covered
under warranty.
If you...

For more information, see:
Select print media
Cause:The wrong kind of paper was loaded in the input tray.
If this did not solve the issue, try the next solution.
Solution 4: Check the ink levels Solution: Check the estimate d ink levels in the ink cartridges.
NOTE:Ink level alerts and indicators provide estimates for planning purposes
only. When you receive a low-ink alerts,  consider having a replacement cartridge
available to avoid possible printing delays. You do not need to replace the ink...

Aligning the printer can help ensure excellent print quality.
For more information, see:
Align the printer
Cause:The printer needed to be aligned.
If this did not solve the issue, try the next solution.
Solution 7: Clean the printhead
Solution: Check the following potential problems, and then clean the printhead.
• Check the orange pull tab on the ink cartridges. Make sure they were completely removed.
• Make sure all ink cartridges are properly installed.
• Make sure you turn off the device properly,...

Solution 1: Make sure you are using genuine HP ink cartridgesSolution: Check to see if your ink cartridge s are genuine HP ink cartridges.
HP recommends that you use genuine HP ink cartridges. Genuine HP ink cartridges
are designed and tested with HP printers to help you easily produce great results,
time after time.
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product
service or repairs required as a result of  using a non-HP supply will not be covered
under warranty.
If you...

Always make sure the paper you are printing on is flat. For best results when printing
images, use HP Advanced Photo Paper.
Store specialty media in its original packaging inside a resealable plastic bag on a
flat surface in a cool, dry place. When you are ready to print, remove only the paper
you plan to use immediately. When you have finished printing, return any unused
photo paper to the plastic bag. This will prevent the photo paper from curling.
NOTE:For this issue, there is not a problem with your...

NOTE:For this issue, there is not a problem with your ink supplies. Therefore,
replacing the ink cartridges or printhead is not necessary.
•Solution 1: Check the paper type
•
Solution 2: Use a higher print quality setting
•
Solution 3: Rotate the image
Solution 1: Check the paper type Solution: HP recommends that you use HP papers or any other paper type that is
appropriate for the product.
Always make sure the paper you are printing on is flat. For best results when printing
images, use HP Advanced...

•Solution 3: Check the ink levels
•
Solution 4: Align the printer
•
Solution 5: Clean the printhead
•
Solution 6: Contact HP support
Solution 1: Make sure the paper is loaded correctly Solution: Make sure that the paper is loaded correctly in the input tray.
For more information, see:
Load media
Cause: The paper was not loaded correctly.
If this did not solve the issue, try the next solution.
Solution 2: Check your print settings Solution: Check the print quality setting and make sure it is not set too...