Honeywell series TouchCenter Keypads 6272 User Manual

Setup (Contd) 
41 
SCREEN ACTION 
2.  Select the time period option you want 
by pressing it.  The drop-down list closes 
automatically and the selection is 
displayed. 
 
3.  Press either the Hom e, Back, 
Home Setup or RESET Home Setup 
button.  A Settings Changed!  pop-up 
window is displayed asking  “Remember 
New Settings? “ Select Yes  to save the 
change or  No to discard the change. 
When the update is complete, depending 
on which selection you made, ( Home, 
Back, Home Setup or RESET Home...

Setup (contd) 
42 
SCREEN ACTION 
2.  Select the time interval you want by 
pressing it.  The drop-down list closes 
automatically and the selection is 
displayed. 
Note:  Additional time intervals can be 
viewed by using the up/down arrows to 
select the time period options. 
 
3.  Press either the Hom e, Back, 
Home Setup or RESET Home Setup 
button.  A  Settings Changed!  pop-up 
window is displayed asking  “Remember 
New Settings? “ Select Yes  to save the 
change or  No to discard the change. 
When...

Setup (Contd) 
43 
SCREEN ACTION 
When the Continue button is pressed 
the message Touch Screen Disabled 
for =30 Seconds  is displayed. During 
these 30 seconds the touch screen should 
be wiped clean of fingerprints using a mild 
soap solution and a soft cloth. When the 
counter reaches zero, the window 
automatically closes and the touch screen 
is active.  
IMPORTANT:   Do not use an abrasive cleaning agent or abrasive 
cloth when cleaning the TouchCenter or damage to the touch screen 
may occur....

Setup (contd) 
44 
SCREEN ACTION 
5. W hen completed, press either the 
Home, or Back button.  A Settings 
Changed! pop-up window is displayed 
asking  “Remember New Settings? “ 
Select  Yes to save the change or  No to 
discard the change.   
After selecting Yes or No, the 
TouchCenter will revert back to the either 
Home screen or Display and Audio Setup 
screen, depending on the selection made 
in Step 4. 
Routine Care 
•   Treat the components of your security  system as you would any 
other...

Setup (Contd) 
45 
SCREEN ACTION 
4. A  Reset the Homescreen Setup 
pop-up window is displayed prompting the 
user to select  Yes or No. 
Press  Yes to reset the button locations. 
Press  No to have the button layout rem ain 
in the default locations. 
 
Slide Show Setup 
The 6272 Keypad offers a Slide Show Feature. How to customize 
these features will be described in this section. 
 
If the MMC/SD card is removed or the keypad is reset at any time, the 
user will need to reselect images to be displayed...

Setup (contd) 
46 
SCREEN ACTION 
7. Select the time interval that you want to 
allow between each photo being viewed 
by touching the Slide Delay arrow and 
select from the drop-down menu (5, 10, 
15, or 20 secs). 
8. Select the type of viewing transition 
desired by touching the Transition  arrow 
and select from (Standard, Horizontal, 
Vertical or Blind Effects).  
The following icons are displayed on the 
Slideshow Setup screen: 
 Preview  
 Previous image 
 Next image 
 Add/Remove image from slide...

 
 Setup (Contd) 
47 
User Setup 
Each user must be assigned a name with a corresponding 4-digit user 
code in order to gain access to various features and functions. The 
TouchCenter can hold the identity for 10 Users in its memory. If 
additional Users are needed, define the additional Users using the 
Console Emulation Mode. 
Users for the system are programmed in a central user setup location 
that provides the specific questions for authorization levels assigned 
to different users.  You may want...

 
Setup (Contd) 
48 
Access User Setup as follows: 
1.  From  the Hom e screen, press the Setup button.  The Setup screen is 
displayed.
 
SCREEN   ACTION 
2.  Press the System Setup button.  The 
System Setup screen is displayed. 
 
3.  Press the USER SETUP  button on the 
System Setup screen.  
 The User Setup screen is displayed. 
 
 
How to Add a User 
Add a user as follows: 
SCREEN   ACTION 
1.  To add a user, press the ADD USER 
button.  The User Authorization screen 
is displayed with the...

 
 Setup (Contd) 
49 
SCREEN  ACTION 
3.  Touch the box next to Enter User 
Name .  The  Enter Data  keyboard screen 
is displayed. 
4.  Type in the user name (6 characters 
max. with no spaces between 
characters) and press the  OK button.   
Notes: 
•  Use the  Shift button for capital letters. 
•  Use the  BS (Backspace) button to 
make corrections. 
•  The  @#$ button is not available for use 
at this time. These characters cannot 
be saved to the control panel.  
Select the partitions, access level,...

 
Setup (Contd) 
50 
SCREEN  ACTION 
6.   Touch the box next to Enter User 
Code.   The User Authorization screen is 
displayed with the instructions  Enter 4 
Digits . 
 
7. Enter the 4-digit User Code for this 
user.   
 
 
 
 
 
 
 
The  “User Options ” screen is displayed 
with the user ’s name, number and code 
displayed.  
 8. Touch the box next to  RF Button 
Zone.  The User Authorization screen is 
displayed with the instructions  Enter 3 
Digits . 
 
 
9. Enter the 3-digit RF Button Zone for...