Honeywell keypad wireless 5828 User Manual
View the Honeywell keypad wireless 5828 User Manual for free. All the Honeywell manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 2
- 2 -
3. Press ✱ READY to accept your entry. The keypad
will display the system status.
MEMO/MESSAGE CENTER (5828V only)
Recording and playing back messages
The keystrokes required for message recording and
playback are as shown in the table below.
In this table, read the + sign as “followed by.”
Example: # + 1 would be read as the [#] key followed by
the [1] key.
MESSAGE CENTER (LYNX)
TO: PRESS:
Record a message: # + 1
Stop recording before end of 20 seconds: 1
Playback a message: # +...](http://img.usermanuals.tech/thumb/35/839/w300_keypad-wireless-5828-1478250421_d-1.jpg "Page 2
- 2 -
3. Press ✱ READY to accept your entry. The keypad
will display the system status.
MEMO/MESSAGE CENTER (5828V only)
Recording and playing back messages
The keystrokes required for message recording and
playback are as shown in the table below.
In this table, read the + sign as “followed by.”
Example: # + 1 would be read as the [#] key followed by
the [1] key.
MESSAGE CENTER (LYNX)
TO: PRESS:
Record a message: # + 1
Stop recording before end of 20 seconds: 1
Playback a message: # +...")
![Page 3
- 3 -
GENERAL NOTES
• If the keypad is on battery power, it will go into
battery-saver mode (become inactive) in 15 seconds
with no key presses, even if exit delay is set to a
longer time period.
You would have to press the [✱] key to view (or hear)
the new status of the security system.
• When arming in the MAXIMUM mode, the keypad
will indicate “AWAY INSTANT.” When arming in
the INSTANT mode, the keypad will indicate “STAY
INSTANT.” • Do NOT use the 5828/5828V to put the LYNX into...](http://img.usermanuals.tech/thumb/35/839/w300_keypad-wireless-5828-1478250421_d-2.jpg "Page 3
- 3 -
GENERAL NOTES
• If the keypad is on battery power, it will go into
battery-saver mode (become inactive) in 15 seconds
with no key presses, even if exit delay is set to a
longer time period.
You would have to press the [✱] key to view (or hear)
the new status of the security system.
• When arming in the MAXIMUM mode, the keypad
will indicate “AWAY INSTANT.” When arming in
the INSTANT mode, the keypad will indicate “STAY
INSTANT.” • Do NOT use the 5828/5828V to put the LYNX into...")
