Honeywell series TouchCenter Keypads 6272 User Manual

							Setup (Contd) 
41 
SCREEN ACTION 
2.  Select the time period option you want 
by pressing it.  The drop-down list closes 
automatically and the selection is 
displayed. 
 
3.  Press either the Hom e, Back, 
Home Setup or RESET Home Setup 
button.  A Settings Changed!  pop-up 
window is displayed asking  “Remember 
New Settings? “ Select Yes  to save the 
change or  No to discard the change. 
When the update is complete, depending 
on which selection you made, ( Home, 
Back, Home Setup or RESET Home 
Setup) the TouchCenter will go to its  
respective selected screen.  
Auto Slide Show After Time 
When the TouchCenter is left idle, and the Auto Slide Show After 
Time is enabled the TouchCenter will begin the slide show. To select 
the Auto Slide Show After Time, do the following: 
SCREEN ACTION 
1.  On the Display and Audio Setup 
screen, press  Auto Slide Show After 
arrow button.  A drop-down list 
displaying the time intervals is displayed. 
  
						

							Setup (contd) 
42 
SCREEN ACTION 
2.  Select the time interval you want by 
pressing it.  The drop-down list closes 
automatically and the selection is 
displayed. 
Note:  Additional time intervals can be 
viewed by using the up/down arrows to 
select the time period options. 
 
3.  Press either the Hom e, Back, 
Home Setup or RESET Home Setup 
button.  A  Settings Changed!  pop-up 
window is displayed asking  “Remember 
New Settings? “ Select Yes  to save the 
change or  No to discard the change. 
When the update is complete, depending 
on which selection you made, (Home, 
Back, Home Setup or RESET Home 
Setup) the TouchCenter will go to its  
respective selected screen.  
Clean Screen 
With the exception of normal cleaning, the TouchCenter is 
maintenance free.   
Clean the TouchCenter as follows: 
1.  From  the Hom e screen, press the Setup  button.  The Setup screen is 
displayed. 
SCREEN ACTION 
2. Press the  Disp&Audio button.  The 

Display and Audio Setup screen is 
displayed. 
3. Press the  CLEAN SCREEN  button. 
A pop-up window display  Touch Screen 
will be disabled so that you may wipe 
the screen clean. Please use a damp, 
soft cloth. DO NOT use any liquids, 
sprays, or ammonia-based cleaners. 
Press CONTINUE to disable 
touchscreen.  
						

							Setup (Contd) 
43 
SCREEN ACTION 
When the Continue button is pressed 
the message Touch Screen Disabled 
for =30 Seconds  is displayed. During 
these 30 seconds the touch screen should 
be wiped clean of fingerprints using a mild 
soap solution and a soft cloth. When the 
counter reaches zero, the window 
automatically closes and the touch screen 
is active.  
IMPORTANT:   Do not use an abrasive cleaning agent or abrasive 
cloth when cleaning the TouchCenter or damage to the touch screen 
may occur.  
 
The  Emergency  screen cannot be accessed while running in the clean 
screen mode. 
Home Setup Button Layout 
Change the location of the buttons on the display screen as follows: 
1.  From  the Hom e screen, press the Setup  button.  The Setup screen is 
displayed. 
SCREEN ACTION 
2.  Press the Disp&Audio button.  The 
Display and Audio Setup screen is 
displayed. 
 
3. Press the Home Setup button. The 
user has the ability to relocate the 
Lighting, Security, and/or Message 
button.    
4. Select the button you want to move; the 
button will disappear momentarily. Select 
the desired location by touching that area 
on the screen where you want the button 
to appear. 
 
 
 
  
						

							Setup (contd) 
44 
SCREEN ACTION 
5. W hen completed, press either the 
Home, or Back button.  A Settings 
Changed! pop-up window is displayed 
asking  “Remember New Settings? “ 
Select  Yes to save the change or  No to 
discard the change.   
After selecting Yes or No, the 
TouchCenter will revert back to the either 
Home screen or Display and Audio Setup 
screen, depending on the selection made 
in Step 4. 
Routine Care 
•   Treat the components of your security  system as you would any 
other electrical equipment. Do not slam sensor-protected doors or 
windows. 
•   Keep dust from accumulating on the keypad and all protective 
sensors, particularly on motion sensors and smoke detectors. 
•   The keypad case and sensors should be carefully dusted with a 
dry soft cloth. Do not spray water or any other fluid on the 
units. 
Reset Home Setup Button Layout 
To set the buttons on the Home Screen back to factory default, do the 
following 
1.  From  the Hom e screen, press the Setup  button.  The Setup screen is 
displayed. 
SCREEN ACTION 
2.  Press the Disp&Audio button.  The 

Display and Audio Setup screen is 
displayed .  
3. Press the  RESET Home Setup  button.  
  
						

							Setup (Contd) 
45 
SCREEN ACTION 
4. A  Reset the Homescreen Setup 
pop-up window is displayed prompting the 
user to select  Yes or No. 
Press  Yes to reset the button locations. 
Press  No to have the button layout rem ain 
in the default locations. 
 
Slide Show Setup 
The 6272 Keypad offers a Slide Show Feature. How to customize 
these features will be described in this section. 
 
If the MMC/SD card is removed or the keypad is reset at any time, the 
user will need to reselect images to be displayed in the slide show. 
 
To set up the Slide Show, press the  Setup button on the Home 
screen and do the following: 
SCREEN ACTION 
1. Press the  Slideshow Setup  button. 
The Slideshow Setup screen is 
displayed. 
2. Insert your personal media card. The 
first image will be displayed and a list of 
stored images will appear on the screen.  
 
3. To view larger images and/or open 
directories, select from the list of stored 
images and press OPEN. 
4. Press the  TOP button to move up one  
one level in the directory. 
5. Press the  Add/Remove  button to select 
an im age. 
6. Press the  CLEAR ALL button to 
remove all user selected images from 
slide  show. 
  
						

							Setup (contd) 
46 
SCREEN ACTION 
7. Select the time interval that you want to 
allow between each photo being viewed 
by touching the Slide Delay arrow and 
select from the drop-down menu (5, 10, 
15, or 20 secs). 
8. Select the type of viewing transition 
desired by touching the Transition  arrow 
and select from (Standard, Horizontal, 
Vertical or Blind Effects).  
The following icons are displayed on the 
Slideshow Setup screen: 
 Preview  
 Previous image 
 Next image 
 Add/Remove image from slide show 
 Set image to home screen wallpaper 
9. To exit the Slideshow screen  press 
the Hom e or Back button. 
NOTE:  W hen viewing the Slide Show, to exit 
this f eature at any time and resume keypad 
operation, press anywhere on the screen.  
						

							 
 Setup (Contd) 
47 
User Setup 
Each user must be assigned a name with a corresponding 4-digit user 
code in order to gain access to various features and functions. The 
TouchCenter can hold the identity for 10 Users in its memory. If 
additional Users are needed, define the additional Users using the 
Console Emulation Mode. 
Users for the system are programmed in a central user setup location 
that provides the specific questions for authorization levels assigned 
to different users.  You may want these users to be the same, but 
there are situations in which you may want a user to have limited 
capabilities. These capabilities are defined by the Authority Level 
assigned each user. 
Authority Levels  
Authority levels define the system functions a particular user can 
perform. Depending on the authority assigned to you, there are 
certain system functions you may be prohibited from performing. The 
following information describes the authority levels that can be 
assigned through the TouchCenter and provides the equivalent 
authority level name that you will find if you are reading your alarm 
system manuals. The authority levels that can be assigned through 
the TouchCenter are as follows: 
Equivalent System Name Touch-
Center 
Authority 
Level Functions 
Residential 
Systems  Comm ercial 
Systems 
Master  Can perform all security functions, 
add/delete users in assigned 
partition, program scheduled events, 
and change partition master code  Partition 
Master 
Level 1 
Master 
Normal  Perform security functions (arm, 
disarm)  Standard 
User Level 3 
Operator A 
Guest  Can arm the system in assigned 
partitions, but cannot disarm the 
system unless the system was armed 
with this code. 
Note: Do not assign this level if 
Quick Arm is enabled in your system.  Guest Level 4 
Operator B 
No 
Access Used to restrict access from a 
partition.  N/A N/A  
						

							 
Setup (Contd) 
48 
Access User Setup as follows: 
1.  From  the Hom e screen, press the Setup button.  The Setup screen is 
displayed.
 
SCREEN   ACTION 
2.  Press the System Setup button.  The 
System Setup screen is displayed. 
 
3.  Press the USER SETUP  button on the 
System Setup screen.  
 The User Setup screen is displayed. 
 
 
How to Add a User 
Add a user as follows: 
SCREEN   ACTION 
1.  To add a user, press the ADD USER 
button.  The User Authorization screen 
is displayed with the instructions  Enter 
Authorized Code . 
 
2.  Enter your Authorized code.  The  “User 
Options ” screen is displayed. 
Note:  The authorized code for adding 
users is dependent upon the system you 
have. Check with your system installer to 
determine who can add users.  
						

							 
 Setup (Contd) 
49 
SCREEN  ACTION 
3.  Touch the box next to Enter User 
Name .  The  Enter Data  keyboard screen 
is displayed. 
4.  Type in the user name (6 characters 
max. with no spaces between 
characters) and press the  OK button.   
Notes: 
•  Use the  Shift button for capital letters. 
•  Use the  BS (Backspace) button to 
make corrections. 
•  The  @#$ button is not available for use 
at this time. These characters cannot 
be saved to the control panel.  
Select the partitions, access level, and 
enter a user number for this user. 
If assigning this user to wireless key, enter 
one of the zone numbers of the keyfob 
(the wireless key must be programmed 
first before it can be assigned to a user). 
5. Touch the box next to  User Number.  
 
The User Authorization screen is 
displayed with the instructions  Enter 3 
Digits . 
  
						

							 
Setup (Contd) 
50 
SCREEN  ACTION 
6.   Touch the box next to Enter User 
Code.   The User Authorization screen is 
displayed with the instructions  Enter 4 
Digits . 
 
7. Enter the 4-digit User Code for this 
user.   
 
 
 
 
 
 
 
The  “User Options ” screen is displayed 
with the user ’s name, number and code 
displayed.  
 8. Touch the box next to  RF Button 
Zone.  The User Authorization screen is 
displayed with the instructions  Enter 3 
Digits . 
 
 
9. Enter the 3-digit RF Button Zone for this 
user.  The  “User Options ” screen is 
displayed.