Honeywell Hrdp H264 Manual

							HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  41 
02/11    
Monitor 
Configuration  
 
 
TRANSPARENCY  SETUP  –  0 ~  20 [Set the transparency of the setup 
windows].  
VGA  RESOLUTION  –  Set  monitor resolution. 
FIT -IN  VGA  –  Adjusts the display to display properly on a VGA monitor. When 
the FIT -IN VGA check box is cleared, the display is adjusted to display on a 
monitor connected to the MAIN BNC output.  
OSD  –  Select the items to display on the screen  (DATE, TIME, TITLE, PTZ, 
RECORD, AUDIO) . 
    
						

							Setup 
 
________________________________________________________________________\
______________________ 
42  
   
Record
 
 
Recording Configuration  
Frame 
 
 
ON/OFF  – Enable or disable recording on  individual camera channels. 
SIZE  – 352  × 240 / 704 ×  240 / 704 ×  480. [Resolution]  
IPS  – 1~30 [Recording Images Per Second]   
QUALITY  – Low  / Normal  / High  
INTENSIVE  – ON/OFF [Intensive Recording on sensor or motion  event] 
Note  When  a motion or sensor event occurs, INTENSIVE RECORDING 
automatically increases the recording rate to the maximum IPS that 
is available (based on your current recording configur ation frame 
rate) up to 30 IPS per channel. If events occur on multiple channels 
with intensive recording enabled, the available IPS is evenly 
distributed across those channels.  
PREALARM – 0~5  seconds  [ Pre-A larm  Recording]  
POSTALARM  – 0~30  seconds  [Post A larm Recording]  
USED FPS –  Displays the images per second (IPS) currently used, and the 
total available IPS. HRDP models have a maximum of 240 IPS and HRDPX 
models have a maximum of 480 IPS.  
    
						

							HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  43 
02/11    
Schedule
 
Set the recording schedule for each camera : 
1.   Press ME NU on the front panel or remote control. 
or  
Click  MENU  on the Mouse -over  menu and select SETUP . 
2.   Select RECORD > SCHEDULE.  
3.   Select a camera to create a recording schedule, or select ALL.  
4.   Select the check box of the desired RECORD MODE.  
5.   Click hour block or th e day of the week to set the entire day.  
 
 
NO 
RECORDING  
No Color   No recording.
 
Even  if you  set recording frames and select  ON in 
RECORD > CAMERA, the DVR  will not record anything if 
you set OFF  in RECORD > SCHEDULE.  
CONTINUOUS  
Yellow   CONTINUOUS recording.
 
MOTION  
Green   MOTION
-detection recording . 
In this mode, the DVR  records only when motion is 
detected in the motion area, and stops recording when 
motion is not detected. Adjust motion area settings in 
RECORD > MOTION/EVENT CONFIGURATION > INPUT . 
If  you  s et  motion to OFF  in RECORD > MOTION /EVENT 
CONFGURATION  and set CONT + MOT  in SETUP > 
RECORD > SCHEDULE  the DVR  will NOTrecord when 
motion is detected. 
    
						

							Setup 
 
________________________________________________________________________\
______________________ 
44  
  SENSOR
 
Orange   SENSOR
-activated recording  
In sensor mode, the DVR  will record when a sensor is 
triggered   -   during  DURATION  time as set in RECORD > 
MOTION /EVENT C ONFGURATION > ACTION.   
CONT+MOT  
Sky Blue   CONTINUOUS
 +  MOTION detection recording  
The  DVR  records  in CONTINUOUS mode but switches 
toMOTION when  motion is det ected in the motion area. 
The  DVR  also will log a M otion Event and send the event 
to the Remote Monitoring software . 
If  you  set  motion  to  OFF  in  RECORD > MOTION /EVE NT 
CONFGURATION  and set CONT + MOT  in SETUP > 
RECORD > SCHEDULE  the DVR  will NOTrecord when  
motion is detected. 
CONT+SENS  
Brown   CONTINUOUS
 +  SENSOR -activated recording  
In this mode, the DVR  records  continuously and switches 
to SENSOR  recording mode  when a sensor is triggered . 
The  DVR  also will log a Sensor  Event and send the event 
to the Remote  Monitoring software . 
MOT+SENS  
Lilac   MOTION detection
 + SENSOR -activated  recording  
The  DVR  will only record when motion is detected or a 
sensor is triggered.  
 
    
						

							HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  45 
02/11  
 
Holiday Setup
 
Add a recording schedule for a specific date  in HOLIDAY SETUP.  You can 
add up to 32  individual HOLIDAY recording schedules. To add a new 
HOLIDAY schdule:  
1.   Press MENU on the front panel or remote control. 
or 
Click  MENU  on the Mouse -over  menu and select SETUP . 
2.   Select RECORD > RECORD CONFIGURATION >  SCHEDULE. 
3.   Create a recording schedule in the H.DAY row.  
4.   Select HOLIDAY SETUP.  
5.   Select DATE and set the date using the on -screen calendar.  
6.   Type a description in the box next to the DATE box using the on -screen 
keyboard. 
7.   Select ADD to  add the holiday. 
 
Instant Recording  
The DVR remote controller has an Instant Recording button. Press the REC 
(INSTANT) button to  start recording all the channels at the recording rate 
configured in Instant Record setup . All the channels, regardless of recording 
mode & recording on/off, will record. 
 will show  in live mode and a red bar  represents Instant Recording 
video  in the graphic search  bar .
 
 
Audio  
 
 
Associate cameras to the appropriate audio channel and enable each audio 
channel for recording.   
						

							Setup 
 
________________________________________________________________________\
______________________ 
46  
   
Instant Recording
 
Configure the recording settings for Instant Recording to use when it is 
activated. 
 
 
IPS  – Set the IPS (recording rate per camera).  
QUALITY  –  Set the picture quality (affects file size).  
SIZE  – Set the resolution of the video image.  
 
Using  Instant Recording  
To activate Instant Recording on the DVR:  
•  Press  the REC key on the front panel of the DVR or remote control, 
or click the Instant recording button on the mouse -over OSD menu.  
The I -REC recording icon will appear in the lower right corner of the 
screen.  
To cancel Instant Recording on the DVR:  
•  Press  the REC key on the front panel of the DVR or remote control.  
The DVR will resume scheduled recording.  
    
						

							HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  47 
02/11    
Motion/Event Configuration
 
Motion / Event Configuration has four sections ; Input, Sensor,  Action, and 
Alarm Monitor. When a n event comes in (Input) the DVR records the image 
according to its setting s ( Camera Configuration ) and triggers an alarm 
(Action).  
 
Input  
 
 
CH  –    Channels 1 -8 /   Channels 9- 16 
MOTION  –  ON / OFF  [Specify whether to use motion  input or not.]  
SENSITIVITY  –  1~10 (1 = least sensitive, 10 = most sensitive)  
AREA  – Define  the motion detection  area . 
SENSOR  – Associate a sensor with the camera channel.  
VIDEO LOSS  – Trigger recording on  video loss events. 
 
    
						

							Setup 
 
________________________________________________________________________\
______________________ 
48  
   
Setting Up Motion Detection Recording
 
To record data only when motion is detected:  
 
 
1.   Press SETUP on the front of the DVR or remote control.  
2.   Select Record > Motion/Event Configuration and set MOTION to ON.   
3.   Set  the motion  SENSITIVITY  level. [1~10].  
4.   Select AREA and press ENTER to set a motion area (global setting; each 
channel can be configured individually).  
5.   Use  the mouse to select or clear squares on the grid:  
a)   Right click  and select CHANNEL SELECT.  
b)   Click the squares to include in the motion grid.  
c)   Right -click  again and select SAVE to save the selected moti on grid. 
6.   When finished selecting motion areas press ENTER on the front of the 
DVR or remote control to save changes.  
7.   Repeat as necessary for each channel.  
8.   When motion area setup is complete select SAVE to save settings and 
exit setup.  
    
						

							HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  49 
02/11    
Sensor
 
 
 
Sensor  Setup 
1.   Use the arrow buttons to select Sensor 1 and press ENTER to change to 
N/O (Normally Open) or N/ C (Normally Closed). 
2.   Repeat for all sensors.  
3.   Select SAVE and press ENTER to save settings . 
 
Alarm  Setup  
1.   Use the arrow buttons to select Alarm 1 and press ENTER to turn the 
SIGNAL to OFF or ON.  
2.   Set each Alarm to N /O (Normally Open) or N /C (Normally Closed).  
3.   Repeat for all relays.  
4.   Select SAVE and press ENTER to save settings . 
 
Power Off  
The POWER OFF option is a preset function that triggers an al arm relay when 
the DVR loses power. This function is preconfigured to set alarm relay No. 4 
to ON and N/C. When a power loss occurs, alarm relay No. 4 will open. When 
power is restored the alarm will close. 
 
    
						

							Setup 
 
________________________________________________________________________\
______________________ 
50  
   
S.M.A.R.T. Alarm
 
The S.M.A.R.T. ALARM option is a preset function that triggers an alarm relay 
when the DVR HDD exceeds the temperature threshold configured on the 
SYSTEM > DISK SETUP > S.M.A.R.T. page. This function is preconfigured to 
set an alarm relay to ON and N/C. When the HDD exceeds the temperature 
threshold, the alarm relay will open. When the temperature is at a safe level 
again the alarm will close.  
 
Note  SET and CLEAR are used to test the alarm relay operation. SET is 
used to manually activate all relays that are set to ON. CLEAR is 
used t o manually deactivate all relays.  
 
Action 
 
 
CH  –    Channels 1~8 /   Channels 9~16  
Alarm  – OFF / 1~ 4 [Associate an alarm relay with a channel].  
Delay  –  0~100 Seconds [Delay time before relay activates].  
Duration  – 0~100 Seconds [Time that the relay is active].   
Preset  –  0~100 [ Enable PTZ camera to move to a preset position when an 
event occurs . See PTZ Control for more information.]  
NOTIFY  – BUZZER/POPUP [Type of alarm with event].