Honeywell Hrdp H264 Manual

							HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  31 
02/11    
System
 
 
System  Configuration  
 
 
To enter System Configuration, press the Setup key on the front of the DVR 
and press ENTER to select System Configuration. Use the arrow buttons on 
the front panel of the DVR or the remote control to navigate the display. Select 
Save and press ENTER to update settings.  
Video Format  –  NTSC / PAL. 
Language  – ENGLISH / SPANISH / FRENCH / PORTUGUESE / GERMAN / 
DUTCH [User Selectable].  
DVR ID  - Required for the operation of multiple units using the supplied IR 
remote control. Each system must h ave a unique ID to function properly.  
Date Format  –  US (MM -DD- YYYY) / EURO (DD -MM- YYYY) / ASIA (YYYY- MM-
DD)  – [User Selectable]. 
Date  –  Press ENTER to select the Date and use the number keys and/or 
arrow buttons to set the date. Press ENTER again to deselect. 
Time  –  Press ENTER to select the Time and use the number keys and/or 
arrow buttons to set the time. Press ENTER again to deselect. 
Time Zone  –  Press ENTER to open the Time Zone window. Use the arrow 
keys to navigate the list and press ENTER to ma ke selection. Select Exit and 
press ENTER to close the window.  
Note   The date and time must be set manually; changing the time zone 
will not automatically change the Time/Date display.  
   
						

							Setup 
 
________________________________________________________________________\
______________________ 
32  
   
System Configuration Continued
 
Use DST –  After completing the Time Zo ne setup, highlight USE DST and 
press  ENTER  to turn Daylight Saving Time ON /  OFF.  
NTP Type  –  Highlight NTP (Network Time Protocol) and press ENTER to 
SYNC the DVR with the Network Time.  
Keypad Beep  –  ON / OFF [Enables / Disables Audible keypad touch 
confirmation].  
Auto Log Off  –  OFF or 1 -10 Minutes  [This feature will close the Configuration 
Menu after XX minutes  of inactivity. This is a security feature.] 
S/W Upgrade  – Start firmware upgrade from selected media (USB or 
CD/DVD)  
 
Upgrade Firmware  
1.  Press  SETUP  on the front panel or remote control.  
or  
Click  MENU  on the hover  menu and select SETUP . 
2.   Select SYSTEM > SYSTEM  CONFIGURATION. 
3.   Click  S/W UPGRADE to open the UPGRADE FIRMWARE window.  
4.   Insert the CD/DVD or USB device.  
5.   Select the media type (DVD/CD- ROM / USB HDD/STICK). 
6.   Click SCAN.  
7.   Click OK to start the upgrade.  
 
    
						

							HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  33 
02/11  
 
Disk Configuration
 
Format 
Shows installed Hard Disk Drives and the status of other attached storage 
devices.  
 
 
 
To format a Hard Drive use the arrow keys to select the appropriate device 
and press ENTER. Select FORMAT and press ENTER, select YES to confirm 
formatting and press ENTER. 
 
To format a USB device use the arrow keys to select the device and press 
ENTER. Select Format and press ENTER. Select YES to to confirm and press 
ENTER.  
Tip  Refer to the list of Approved USB Flash Drives  in the Introduction  
chapter. 
To refresh the list of connected USB devices select RESET and press ENTER. 
Caution  All USB devices must be formatted as FAT32 before using with the 
DVR.  
Note Upon formatting a drive, all video and other data stored on that 
drive will be permanently erased and cannot be recovered. 
 
    
						

							Setup 
 
________________________________________________________________________\
______________________ 
34  
   
Overwrite
 
Sets options for overwriting data when the Hard Disk Drive is full. 
 
 
 
Enable  HDD OVERWRITE  to allow the DVR to write over previously recorded 
data, starting with the oldest date, when the HDD is full. If set to DISABLE the 
DVR will not record any new data once the HDD becomes full.  
Enable a DISK FULL WARNING  for notification when the HDD becom es full 
and HDD Overwrite is disabled. 
 
Check 
Checks the HDD for errors or failure.  
  
						

							HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  35 
02/11  
 
SMART Check
 
S.M.A.R.T. = Self Monitoring Analysis & Reporting Technology.  
Enable SMART Check to detect signs of HDD failure.  
 
 
 
1.   Set ENABLE S.M.A.R.T. to ENABLE or DISABLE . 
2.   Set a CHECK INTERVAL between 1 and 24 hours.  
3.   Define a TEMP  THRESHOLD and select Celsius or Fahrenheit.  
Note   The recommended upper optimum operating temperature for the 
HDD is between 104F to 122F (40C to 50C).  
4.  Select a S.M.A.R.T.  WARNING to be activated when the HDD reaches the 
defined threshold. 
5.   Select SAVE and press ENTER to save settings.  
Tip   Select HDD INFORMATION and press ENTER to view the current 
HDD, DVD, and USB drive information.  
 
   
						

							Setup 
 
________________________________________________________________________\
______________________ 
36  
   
User Configuration
 
Use the User Configuration to Add or  Delete users.  
 
    
						

							HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  37 
02/11    
Adding / Changing a User
 
 
 
SHUT DOWN  – Allow the user to shut down or restart the DVR.  
EXPORT  –  Allow the user to perform an export or backup saved data.   
USE CD/DVD /USB -  A llow  the user  to use  the  DVD Drive.  This is a Server side 
feature only.  
SEARCH  –  Allow the user to perform a calendar, or event search and access 
data from the current day using the Replay button on the front panel.  
EXPORT VIEWER  –  Allow the user to include a copy of the Backup Viewer 
application when a local bac kup is made. This is a server side feature only.  
PTZ  – Allow the user control of any connected PTZ cameras.  
HEALTH CHECK  – Allow the user to use the Health Check function of FVMS 
to connect to and monitor the DVR.  
NETWORK CONNECTION  – Allow the user to log  in using Web Viewer.  
MENU ACCESS PERMISSION  –  Allow the user to access the selected 
portion of the setup menu.  
LIVE & PLAYBACK  –  Allow the user to view live and recorded data for only 
the selected cameras.  
 
To add a new user:  
1.   Press MENU on the front panel  or remote control. 
or  
Click  MENU  on the Mouse -over  menu and select SETUP . 
2.   Select SYSTEM > USER  CONFIGURATION . 
3.   Click ADD/CHANGE . 
4.   Enter a USER name.  
5.   Enter a PASSWORD and CONFIRM for the new user.  
6.   Select the FUNCTIONs and MENU ACCESS options for the user.  
7.   Se lect which cameras will be visible to the user in LIVE & PLAYBACK 
modes. 
    
						

							Setup 
 
________________________________________________________________________\
______________________ 
38  
   
Configuration  
Import and Export current settings. See details in the Save Settings  section . 
 
Shutdown  
Use Shutdown to safely shutdown the system. 
1.  Select System > Shutdown.  
2.   Select OK to confirm and press ENTER to safely shutdown the system. 
3.   Turn the power  off when shutdown is complete by unplugging the power 
adapter cord on the back of the DVR. 
N ote   Improper shut down of the system can cause data loss and system 
corruption.  
 
Camera 
Camera Configuration  
 
 
CH  –Camera Channels   
NAME  –  Use the on- screen keyboard to enter a camera name [user defined]  
HIDDEN  –  ON/OFF  
Note HIDDEN on the CAMERA CONFIGURATION page hides cameras 
from the main monitor (VGA/MAIN BNC) when no users are logged 
in. To hide cameras from users, clear camera check boxes on the 
SYSTEM > USER CONFIGURATION > ADD/CHANGE.  
ADJUST –Detailed camera display settings . 
   
						

							HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  39 
02/11    
Color Setup (Adjust) 
CAMERA 
– 1  ~  16 [camera to apply color 
settings to]  
BRIGHT NESS –  0 ~ 20 
CONTRAST  – 0 ~ 20  
COLOR    –  0 ~ 20  
DEFAULT  –  Apply default system color 
settings.  
APPLY ALL –  Apply current color settings 
to all cameras  
 
 
 
 
 
 
PTZ Configuration  
 
 
CH  –  Camera Channels  
BAUD RATE  – Sets the port information for the connected camera. [Consult 
the documentation provided by the camera manufacturer to obtain this 
information.]  
ID  – Sets the PTZ ID from 1 -255  
PROTOCOL  –  Select a PTZ protocol     
						

							Setup 
 
________________________________________________________________________\
______________________ 
40  
   
Spot / Sequenc
e Configuration  
 
 
Spot/Sequence Configuration  allows you to set the parameters for the SPOT 
OUT on the DVR and the local live view sequencing.  
SPOT  –Configure the SPOT OUT connection.  
INTERVAL – 1 ~ 100 seconds [Set the sequence interval time].  
POPUP  – ON  / OFF [ When set to ON,  this function interrupts the sequencing 
when an event occurs, and switches to the event channel. ] 
C HANNEL SELECT  –  1~16 / ALL [Select cameras to include in sequence.]  
 
SEQUENCE  – Configure the appearance of the sequence on the live v iew 
screen  (MAIN/VGA) . 
PAGE DWELL TIME  – 0 ~ 100 seconds [Set the sequence interval time for 
full page].