Honda Civic 5 Owners Manual

Î
μ Each time you press the TITLE
button the display mode switches
between the album name, the song
name, the artist name, or name of f
(which turns off the text display).
When the iPod is connected and the
iPod mode is selected on the audio
display, ‘‘iPod’’ is shown in the
display. Af ter loading, you will see
Honda mark on the iPod. That
means the operation is allowed only
with the vehicle’s audio unit controls.
Thedisplaymaybechanged
depending on models or
f irmware versions.If ‘‘iPod’’ does not...

µ
CONT INUED
Use the SKIP bar while an iPod is
playing to select passages and
change f iles.
Each time you press and
releasethe sideof theSKIPbar,
the system skips forward to the
beginning of the next f ile. Press and
releasethe sideof thebar,to
skip backward to the beginning of
the current f ile. Press it again to skip
to the beginning of the previous file.
To move rapidly within a f ile, press
andholdeitherside( or )
of the SKIP bar.Af ter making a selection, wait f or a
f ew seconds until the display...

µµ
µ You can select any type of repeat and
shuf f le modes by using the RPT and
RDM buttons.
To continuously replay
a song, press and release the RPT
button. You will see RPT in the
display. Press it again to turn it of f .Press and
release the RDM button to play the
songs in random order. You will see
RDM in the display. Press and hold
the RDM button to return to normal
play.
This feature,
when activated, plays all songs in
each album in random order. To
activate shuffle album, press the
RDM button...

Disconnect the dock connector of
the iPod f rom the USB adapter cable.
Make sure to f ollow the maker’s
instructions to disconnect it.To play the radio, press the AM/FM
button. Press the CD/AUX button to
switch to the disc mode (if a disc is
loaded). Press the CD/AUX button
again to switch back to the iPod
mode.
If you reconnect the same iPod, the
audio unit may begin playing where
it lef t of f , depending on the iPod
specif ication.If you see an error message in the
display, see page .250
Features...

If there is a problem with your iPod,
an error message will appear. The
chart on the right explains the error
messages you may see. Disconnect
the iPod, and reconnect it. If there is
still a problem, the error message
will reappear. Take your vehicle to a
dealer.Error
MessageCause Solution
USB ROM Error
Abnormal power source
No files in iPod
Use of unsupported iPod
Recognition f ailure of
iPodThere is a problem with the USB adapter unit.
Appears when the overcurrent protection
feature of the system stops...

(For some types) Playing a USB Flash Memory Device
Features
Audio System (on vehicles without navigation system)
251
SCAN BUTTON
TITLE BUTTON
POWER/VOLUME KNOB
SKIP BARTUNE KNOB REPEAT BUTTONRANDOM BUTTON AM/FM BUTTON
CD/AUX BUTTON
Left-hand drive model is shown.
09/01/28 18:05:52 32SMG631_256 

Î
Î The audio system reads and plays
the audio f iles on the USB f lash
memory device in MP3, WMA or
AAC f ormats. Depending on the
f ormat, the display shows MP3,
WMA or AAC when a USB flash
memory device is playing. The USB
f lash memory device limit is up to
700 f olders or up to 65535 f iles.
Only AAC f ormat f iles recorded
with iTunes are playable on this
audio unit.
The recommended USB f lash
memory devices are 256 MB or
higher. Some digital audio players
maybecompatibleaswell. The recommended...

µ µ
µ
µ
µ
µ
µµ
µ
µ
µ
µ
µ
µ
µ
µ
µ
CONT INUED
Maximum layers: 8 Supported standards:
MPEG4/AAC LC
MPEG2/AAC LC Bitrate:
48 320 kbps The specif ications f or compatible
AAC files are:Maximum layers: 8 The specif ications f or compatible
WMA f iles are:
Bitrate:
48 320/VBR kbps (Max 384) Depending on the type and
number of f iles, it may take some
time bef ore they begin to play.
Depending on the sof tware the
f iles were made with, it may not be
possibletoplaysomefiles,or...

You can disconnect the USB f lash
memory device at any time even if
the USB mode is selected on the
audio system. Make sure to follow
the USB f lash memory device’s
instructions when you remove it.
Connect the USB f lash memory
device to the USB adapter cable
correctly and securely. Open the lid of the USB adapter
cable socket. Insert the USB
adapter cable connector into it
securely.
When the USB f lash memory device
is connected, ‘‘USB’’ is shown in the
display. 1. 2.
Audio System (on vehicles without...

µµ
¼
CONT INUED
Each time you press the TITLE
button, the display shows you the
text data (f older, f ile, artist, album or
track name) on a file.
The display shows up to 11
characters of the selected data. If the
text data has more than 11
characters, you will see the f irst 10
characters and the indicator in
the display. Press and hold the
TITLE button until the next 11
characters are shown.Each time you press and
releasethe sideof theSKIPbar,
the system skips forward to the
beginning of the next f...