Honda Civic 5 Owners Manual

To activate this function, press the
AUDIObuttononthecontrolpanel
to view the audio display on the
navigation screen, then push down
the selector on the interface dial to
select the function display. Turn the
dial to select the PTY, then press the
ENT on the interf ace dial.
The PTY display f unction also comes
on by pressing and holding the TA/
PTY button on the audio control
panel f or more than 2 seconds.
Turn the interf ace dial to select
NEWS, then press the ENT to enter
the selection. Push the...

µ
µ
µ
µ You can adjust the sound on the
navigation screen. To adjust the
sound, push the AUDIO button on
the control panel, then push down
the selector. Turn the interface dial
to select the (sound mode),
then press the ENTER on the dial to
enter the sound grid.
Adjusts the bass.
Adjusts the treble.
Adjusts the front-to-back
strength of the sound.
Adjusts the side-to-
side strength of the sound.
To adjust each setting, turn the
interface dial to select the setting
you want to adjust, then press the...

µ In balance and f ader setting, the
right lower display shows you the
current setting of the sound strength
coming f rom each speaker. In bass
and treble setting, the display shows
you the setting with the vertical bars.
Turn the interface dial to the right or
the lef t to adjust the sound level,
then press ENT to enter your setting.You can use the instrument panel
brightness control knob to adjust the
illumination of the audio control
panel and the side display (see page
). The audio system...

Playing a Disc
Audio System (on vehicles with navigation system)
Features279
SIDE DISPLAY
AUDIO DISPLAY
EJECT BUTTONCD BUTTONTo select REPEAT, RANDOM, SCAN, SOUND
REPEAT BUTTON
TUNE BAR
SCAN BUTTON
AUDIO BUTTON
INTERFACE DIAL SEEK/SKIP BAR POWER/VOLUME KNOBDISC SLOT
Left-hand drive model is shown.TITLE BUTTON
09/01/28 18:09:48 32SMG631_284 

µ
µ
µ
µ
µ
µ
µ
µ You operate the disc player with the
same controls used f or the radio. To
load or play discs, the ignition switch
must be in the ACCESSORY (I) or
ON (II) position.
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.
This audio system can also play
CD-Rs and CD-RWs compressed in
MP3 or WMA standard. When
playing a disc in MP3, you will see
‘‘MP3’’ on the audio display and the
side display. In WMA f ormat,
‘‘WMA’’ will appear on each...

µ Insert a disc about half way into the
disc slot. The drive will pull the disc
in the rest of the way and begin to
play it.
You cannot load and play 8-cm
(3-inch) discs in this system.
When playing a CD with data text,
the track and album titles are also
shown. When playing a disc in MP3
or WMA, the album name, the f ile
number and name, the f older
number and name, and the elapsed
time are shown. The system will
continuously play a disc until you
change modes. If the disc was not
recorded with this...

µ
Û
Ý On the track list, a track name will
not be displayed if the disc doesn’t
have the text data. In this case, only
the track number is displayed.
To exit the track list, press the
AUDIO button.
To
select a dif f erent f older, press either
side of the TUNE bar to move to the
beginning of the next f older. Press
the side of the TUNE bar to skip
to the next folder, and the side to
move to the beginning of the current
folder.Pressitagaintoskiptothe
beginning of the previous f older. You can also...

CONT INUED
Push up the selector on the interface
dial to show the folder list. Turn the
knob on the interf ace dial, highlight
the f older you want to see the
inf ormation within, and press ENT
on the dial.You can see the list of all the f iles in
the selected folder. Turn the knob
on the interf ace dial, then press ENT
on the dial to set your selection.If the root f older has some additional
f olders in the lower layer, they will
belistedonthescreen.
Audio System (on vehicles with navigation system)...

µµ
Pressing either side of the SEEK/
SKIP bar also turns of f the repeat
feature.To continuously replay
a track (f ile in MP3 or WMA mode),
press and release the RPT button.
You will see RPT in the side display.
Press and hold the RPT button again
to turn it off.
You can also select the repeat
f unction on the audio display. Press
the AUDIO button to view the audio
display, then push down the selector
on the interf ace dial. Turn the
interf ace dial to select the track
repeat. Press the ENT on the dial...

µ
µ
You can also select the f older repeat
f unction on the audio display. Press
the AUDIO button to view the audio
display, then push down the selector
on the interf ace dial. Turn the
interf ace dial to select the f older
repeat. Press the ENT on the dial to
enter your selection. You will see
FOLDER REPEAT on the display.
To turn of f this f eature, select the
f older repeat as previously described,
then press the ENT again. Pressing
the RPT button on the control panelrepeatedly also cancels this f...