Honda Civic 5 Owners Manual

µµ µ
Each time you press and release the
RPT button, the mode changes f rom
f ile repeat to f older repeat, then to
normal play. To continuously replay
an MP3, WMA, or AAC file, press
and release the RPT button. You will
seeRPTinthedisplay.Pressand
hold the RPT button to return to
normal play.
Pressing either side of the SEEK/
SKIP bar also turns of f the repeat
feature.This f eature plays the
tracks within a USB flash memory
device in random order. To activate
random play, press and release the
RDM...

µµ µ
Pressing either side of the SEEK/
SKIP bar, or selecting a dif f erent
folder with the TUNE knob also
turns off the scan feature.
Each time you press and release the
SCAN button, the mode changes
f rom f ile scan to f older scan, then to
normal play. Each time you press and release the
RDM button, the mode changes
f rom Folder Random Play to Within
a Disc Random Play, then to normal
playing.The SCAN f unction
samples all the tracks on the USB
f lash memory device in the order
they are recorded on...

Disconnect the USB f lash memory
device. On some devices, f ollow the
maker’s instructions to disconnect
the device.To play the radio, press the AM/FM
button. Press the CD/AUX button to
switch to the disc mode (if a disc is
loaded). Press the CD/AUX button
again to switch back to the USB
mode.
If you reconnect the same USB f lash
memory device, the system will
begin playing where it lef t of f .If you see an error message in the
display, see page .259
Audio System (on vehicles without navigation system)...

If there is a problem with your USB
f lash memory device, an error
message will appear. The chart on
the right explains the error
messages you may see. Disconnect
the USB f lash memory device, and
reconnect it. If there is still a
problem, the error message will
reappear. Take your vehicle to a
dealer.Error
MessageCause SolutionUSB ROM Error
Abnormal power source
Use of unsupported f iles
No files in USB flash
memory device
Use of unsupported USB
flash memory deviceThere is a problem with the USB adapter...

Playing a T ape (Optional f or some types)
Audio System (on vehicles without navigation system)
Features260
REPEAT BUTTON
PRESET BUTTONS
POWER/VOLUME KNOB
SEEK/SKIP BAR
Left-hand drive model is shown.
09/01/28 18:07:02 32SMG631_265 

Úµ
Î
Î
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Make sure the open side of the tape
is facing right, then insert the tape
most of the way into the slot. The
system will pull the tape in the rest
of the way, and begin to play it.
Thetapedirectionindicatorcomes
on to show you which side of the
tape is playing. The indicates the
sideyouinsertedupwardisnow
playing. If you want to play the other
side, press the preset 5 ( )
button. When the player reaches the
end of the tape,...

µ
µThetapeplayerpicksupdirtand
oxides f rom the tape. This
contamination builds up over time
and causes the sound quality to
degrade. To prevent this, you should
clean the player af ter every 30 hours
of use.
If you do not clean the tape player
regularly, it may eventually become
impossible to remove the
contamination with a normal
cleaning kit.
Use 100-minute or shorter tapes.
Tapes longer than that may break or
jam in the drive.
If the tape is loose, tighten it by
turning the hub with a pencil or...

In addition to the standard audio
controls, the audio system in your
vehicle can be operated using the
voice control system. See the
navigation system manual f or
complete details.Playing the Radio Voice Control System
Audio System (on vehicles with navigation system)
Features263
SIDE DISPLAY
AUDIO DISPLAY
PRESET BUTTONS
POWER/
VOLUME
KNOB
Left-hand drive model is shown.AUDIO BUTTON AM/FM BUTTON TUNE BAR
09/01/28 18:07:28 32SMG631_268 

The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
power/volume knob or the AM/FM
button. Adjust the volume by turning
the power/volume knob.
PushingtheAUDIObuttononthe
control panel will also turn on the
system.
You can operate the audio system
with the control buttons on the audio
panel without displaying the audio
control display on the navigation
screen. The audio setting will be
shown in the side display. When the
navigation system is activated,...

µ
µ
Û
ÝThe SEEK f unction
searches up and down f rom the
current f requency to f ind a station
with a strong signal. To activate it,
press and release the or
side of the SEEK bar. With the
interface dial, push the selector to
the right or to the left.
Use the TUNE bar to tune
the radio to a desired f requency.
Press the side of the bar to tune
to a higher f requency, and the
side to tune to a lower f requency.To tune the radio with the interface
dial, push the selector down, then
turn the dial to...