Honda Civic 5 Owners Manual

¶If you f ail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.
Repeat the setup.
To cause the trip meter A and the
average f uel economy f or trip A to
reset every time you ref uel your
vehicle, adjust it as follows. To exit the customizing mode, select
theexitmodebypressingtheINFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the normal display.
When your selection is successf ully
completed,...

If you f ail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.
Repeat the setup.
To exit the customizing mode, select
theexitmodebypressingtheINFO
button repeatedly, then press the
SEL/RESET button. The display will
return to the normal display.
You can select ‘‘ON’’ or ‘‘OFF’’. Each
time you press the INFO button, the
selected mode switches between on
andoff.Enteryourselectionby
pressing the SEL/RESET button.When your...

While the multi-information display
is showing ‘‘ELAPSED TIME
RESET,’’ press the SEL/RESET
button. The display changes to the
setting display.TRIP A: The elapsed time is reset
when you reset trip meter A.
TRIP B: The elapsed time is reset
when you reset trip meter B.
You can select ‘‘IGN OFF,’’
‘‘TRIP A,’’ or ‘‘TRIP B’’. Each time
you press the INFO button, the
selected mode switches between
them. Enter your selection by
pressing the SEL/RESET button. To cause the elapsed time to reset...

If you f ail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.
Repeat the setup.
You can select the measurement
standard in the trip computer as
described as f ollows. There are three
selectable modes; AUTO, KM and
MILES. To exit the customizing mode, select
theexitmodebypressingtheINFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the normal display.
When your selection is successf ully...

You can select ‘‘AUTO,’’ ‘‘KM,’’ or
‘‘MILES’’. Each time you press the
INFO button, the selected mode
switches between them. Enter your
selection by pressing the SEL/
RESET button.
While the multi-information display
is showing ‘‘DISPLAY UNIT,’’ press
the SEL/RESET button. The display
changes to the setting display. AUTO: The displayed measurements
of the trip computer on the multi-
inf ormation display correspond with
the speedometer display setting. The
display switches between ‘‘km’’ and
‘‘miles.’’...

If you f ail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.
Repeat the setup.
You can select the REV indicator in
the instrument panel. While the
multi-inf ormation display is showing
‘‘REV. INDICATOR,’’ press the
SEL/RESET button. The display
changes to the setting display.You can select ‘‘ON’’ or ‘‘OFF’’. Each
time you press the INFO button, the
selected mode switches between on
and of f . Enter your selection by...

If you f ail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.
Repeat the setup.
You can display the ECO indicator in
the instrument panel. While the
multi-inf ormation display is showing
‘‘ECO. INDICATOR,’’ press the
SEL/RESET button. The display
changes to the setting display. To exit the customizing mode, select
theexitmodebypressingtheINFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the...

If you f ail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.
Repeat the setup.
To exit the customizing mode, select
theexitmodebypressingtheINFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the normal display.
You can select ‘‘ON’’ or ‘‘OFF’’. Each
time you press the INFO button, the
selected mode switches between on
andoff.Enteryourselectionby
pressing the SEL/RESET button.When your...

Press and hold the INFO button to
enter the customizing mode, then
press and release the INFO button to
select ‘‘LANGUAGE.’’ While the
multi-inf ormation display is showing
‘‘LANGUAGE,’’ press the SEL/
RESET button. The display changes
to the setting display.You can select any of the f ollowing
languages: English, French, German,
Spanish, Italian, Portuguese. Press
and release the INFO button to
select the language, then press the
SEL/RESET button to enter the
selection.When the language selection is...

If you f ail to set the language setting,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.
Repeat the setup.To exit the customizing mode, select
theexitmodeshownaboveby
pressing the INFO button repeatedly,
f ollowed by the SEL/RESET button.
The display goes back to the normal
display.If you want to set the customizable
vehicle control settings to the default
setting, press the INFO button on
the steering wheel repeatedly until
‘‘DEFAULT ALL’’ is...