Honda Civic 5 Owners Manual

If you do not select any settings on
the display af ter you press the INFO
button and the setting menu is
displayed, the customizing mode
display will return to the normal
display af ter about 10 seconds.
If you try to start driving while
customizing the settings, you will see
‘‘MUST STOP AND PARK TO
CHANGE SETTINGS’’ on the
display and the customizing will be
cancelled.
Customizing is also cancelled, if you
turn the ignition switch out of the
ON (II) position. You can also select the specified
speed...

To set the speed alarm while the vehicle
is stopped:
Press and hold the INFO button to
enter the customizing mode, then
press and release the INFO button
repeatedly to select ‘‘SPEED
ALARM.’’ While the multi-
inf ormation display is showing
‘‘SPEED ALARM,’’ press the SEL/
RESET button. The display changes
to the setting mode.Speed setting 1: You can set the
alarm on or off, and adjust the
setting speeds above or below
50 km/h (30 mph).
Speed setting 2: You can set the
alarm on or off, and adjust the...

´
µ Select either of the setting modes (1
or 2), then select on or of f by
pressing the SEL/RESET button
repeatedly.The displayed number is the current
speed setting. Select either the or
icon by pressing the INFO button
repeatedly, then press the SEL/
RESET button to change the setting
value. To adjust the setting speed, select
either of the setting speeds, then
press and release the SEL/RESET
button. The display changes to the
speed setting screen.
Multi-Inf ormation Display
Inst rument s and Cont...

Once you have made your selection,
press and release the INFO button to
move to the exit mode. Press the
SEL/RESET button to enter your
setting. If you press the INFO button,
the display goes back to the setting
mode. Repeat the setup. Each time you press the SEL/
RESET button, the setting speed
increases or decreases by 5 km/h
(mph). You can set the speed values
over 5 km/h (5 mph) with 5 km/h
(mph) steps. Always f ollow the
posted speed limit and never drive
faster than is safe for the traffic...

Af ter your selection, press and
releasetheINFObuttontomoveto
the exit mode. Press the SEL/
RESET button to enter your setting.
If you press the INFO button, the
display goes back to the setting
mode. Repeat the setup.
Press the INFO button f or about 1
second to switch the display. You will
see the speed alarm settings in the
multi-inf ormation display.Select the desired setting speed,
then press the SEL/RESET button.
Each time you press the SEL/
RESET button, the selected speed
icon switches between on...

Af ter pressing the SEL/RESET
button, the display shows your
setting f or a f ew seconds, then goes
back to the normal display.If you do not press any button, the
display returns to the normal display
af ter about 10 seconds.
Multi-Inf ormation Display
Inst rument s and Cont rols121
Alarm on
09/01/28 17:48:22 32SMG631_126 

´µ
REV. INDICATOR: Rev indicator
canbeturnedonoroff (seepage
).
ECO. INDICATOR: ECO indicator
canbeturnedonoroff (seepage
). You can customize some of the
vehicle control settings to suit your
needs. The f ollowing items are the
settings you can customize.
WARNING MESSAGE: The
warning message is displayed with
the symbol or not (see page ).
ADJUST OUTSIDE TEMP.
DISPLAY: The outside
temperature indicator value is
adjustable up to or 3°C (see
page ).
TRIP A RESET WITH REFUEL:
Average f uel economy f or...

Press and hold the INFO button to
enter the customizing mode, then
press and release the INFO button
repeatedly to select ‘‘CHG SETTING.’’
While the multi-information display
is showing ‘‘CHG SETTING,’’ press
the SEL/RESET button. The display
changes to the setting mode.
Press and release the INFO button
repeatedly until you see the setup
you want to customize, and press the
SEL/RESET button to enter your
selection. Each time you press the
INFO button, the display changes as
shown. To customize each...

You can select ‘‘ON’’ or ‘‘OFF’’. Each
time you press the INFO button, the
selected mode switches between on
andoff.Enteryourselectionby
pressing the SEL/RESET button.When your selection is successf ully
completed, the display shows
‘‘SETUP ON’’ f or a f ew seconds,
then goes back to the ‘‘CHG
SETTING’’ display. Press the SEL/
RESET button, then press the INFO
button repeatedly to select another
customizing mode.To exit the customizing mode, select
theexitmodebypressingtheINFO
button repeatedly, then...

´µ
´´´
µµµ If you f ind that the temperature
reading is always a f ew degrees
below or above the actual
temperature, adjust it as described in
the f ollowing section.
While the multi-information display
is showing ‘‘ADJUST OUTSIDE
TEMP. DISPLAY,’’ press the SEL/
RESET button. The display changes
to the setting display.The highlighted number is the
current adjustment above or below
the outside temperature. Select
either or icon by pressing the
INFO button repeatedly then press
the SEL/RESET button...