Honda 99 Outboard Owners Manual

TECHNICAL AND CONSUMER INFORMATION 
Emission Control 
System Information 
Source of Emissions 
The combustion process produces carbon 
monoxide, oxides of nitrogen, and 
hydrocarbons. Control of hydrocarbons 
and oxides of nitrogen is very important 
because, under certain conditions, they 
react to form photochemical smog when 
subjected to sunlight. Carbon monoxide 
does not react in the same way, but it is 
toxic. 
Honda utilizes lean carburetor settings 
and other systems to reduce the emissions 
of...

TECHNICAL AND CONSUMER INFORMATION 
Replacement Parts 
The emission control systems on your 
Honda engine were designed, built, and 
certified to conform with EPA emission 
regulations. We recommend the use of 
genuine Honda parts whenever you have 
maintenance done. These original-design 
replacement parts are manufactured to the 
same standards as the original parts, so 
you can be confident of their 
performance. The use of replacement 
parts that are not of the original design 
and quality may impair...

TECHNICAL AND CONSUMER INFORMATION 
STAR LABEL 
A Star label was applied to this 
outboard motor in accordance with the 
requirements of the California Air 
Resources Board. 
The Star Label means Cleaner Marine Engine 
This engine has been certified as a: -, 
c 
a . 
0 0 
The Symbol for Cleaner Marine Engines: 
Cleaner Air and Water - for healthier lifestyle and environment. 
Better Fuel Economy -bums up to 30 - 40 percent less gas and oil than conventional 
carbureted two-stroke engines, saving money...

TECHNICAL AND CONSUMER INFORMATION 
One Star 
Low Emission 
The one-star label identities engines that 
meet the Air Resources Board’s 200 I 
exhaust emission standards. Engines 
meeting these standards have 75% lower 
emissions than conventional carbureted 
two-stroke engines. These engines are 
equivalent to the U.S. EPA’s 2006 
standards for marine engines. 
Two Stars 
Very Low Emission 
The two-star label identifies engines that 
meet the Air Resources Boards 2004 
exhaust emission standards. Engines...

TECHNICAL AND CONSUMER INFORMATION 
Specifications 
MODEL 
BF8D/BFP8D Description Code BABJ Type 
H 
HS I? 
Overall length 
19.5 in (495 mm) 
Overall width 
13.6 in (345 mm) 
Overall height S 
43.5 in (1,105 mm) 
L 
X 
Transom height S 48.6 in (1,235 mm) 
54.1 in (1,375 mm) 
17.1 in (433 mm) 
Weight L 
22.2 in (563 mm) 
X 
27.7 in (703 mm) 
S 87.1 93.7 Ibs (42.5 kg) 98.1 Ibs (44.5 kg) 
L 91.5 Ibs (41.5 kg) 98.1 Ibs (44.5 kg) 101.4 Ibs (46.0kg) 
x 100.3 Ibs (45.5 kg) 108.0 Ibs (49.0 kg) 110.2 Ibs (50.0...

TECHNICAL AND CONSUMER INFORMATION 
Specifications 
MODEL 
Descnption Code 
-Type Overall length 
Overall width 
Overall height S 
L 
X BFS.SD/BFPS.SD 
BABJ Ii HS 
19.5 in (495 mm) 
13.6 in (345 mm) 
43.5 in (1,105 mm) 
48.6 in (1,235 mm) 
54.1 in (1,375 mm) 
4 stroke OHC in-line 2 c linder water-cooled 
~~1 
Ignition system 
C.D.1 
Lubrication system 
Trochoid pump pressure lubrication 
Specitied 011 
Enoine: API standard (SG, SH, SJ) 
SAE low-30 
Gear case: API standard (GL-4/5) 
SAE SO outboard motor...

TECHNICAL AND CONSUMER INFORMATION 
CONSUMER INFORMATION 
Honda Publications 
These publications will give you 
additional information for maintaining 
and repairing your outboard motor. You 
may order them from your Honda marine 
dealer. 
Shop Manual 
This manual covers complete 
maintenance and overhaul procedures. It 
is intended to be used by a skilled 
technician. 
Parts Catalog 
This manual provides complete, 
illustrated parts lists. 
Warranty Service Information 
Honda Marine dealership personnel...

WIRING DIAGRAM 
TILLER HANDLE TYPE (with recoil starter and 6A charge coil) 
” . 
 
” . 
- . a 
[ 
96  

i 
- 
1  

WIRING DIAGRAM 
REMOTE CONTROL TYPE 
L L. 
. 
,“.. 
98