Hitachi Z3000w Manual

I
e. Si l’appareil est tombé ou qu’il a été endommagé.
f. Si l’appareil affiche une nette modification de ses performances, cela signifie qu’il a besoin d’être réparé.
21. 
21. 21.  21. Pi
PiPi Piéces de 
ces de ces de  ces de rechange
rechangerechange rechange
Si l’on a besoin de piéces de rechange, veiller á ce que le technicien de réparation utilise exclusivement les
piéces de rechange spécifiées par le fabricant ou des piéces ayant les mêmes caractéristiques que les piéces
d’origine.  Les piéces de...

J
IMPORTANT NOTICE
These products have been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.  This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications....

J
Contents
Composition(including accessories)

K
K
K
K
K1
Outline and features

K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K2
Warnings and cautions when using

K
K
K
K
K4
Note when using

K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K5
Facility names and functions

K
K
K
K
K
K
K
K
K
K
K6
Lens installation

K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K13
Lens flangeback adjustment

K
K
K
K
K
K
K
K
K
K14
White shading adjustment

K
K
K
K
K
K
K
K
K
K
K
K15
Camera adapter installation

K
K
K
K
K
K
K
K
K
K
K17
Microphone...

1
ç
çç çComposition (including accessories)
When unpacking the Z-3000W—Z-3000, check for the following items and accessories. 

2
  Outline and features
The Z-3000W , Z-3000is a new concept 2/3-inch CCD
camera that stresses fundamental camera
performance.
Advanced functions are realized by the new single
chip digital signal processor that improves gradation
response, color reproducibility and perceived
resolution.    The DSP is fully digitized from processor
to encoder and incorporates a built-in noise reducing
function.
The design fully comprehends the needs of on-site
camerawork, with a rugged diecast frame that is light,
has a...

3
ç
çç çOutline and features
Ù
ÙÙ ÙExtensive operational convenience
ÔProgrammable operation switches with
functions assigned according to application.
ÔAuto white and shading compensation
coupled with lens extender.
ÔGain, detail, gamma and other settings can
be stored in 4 scene files for easy recall.
ÔEach optical filter has four white balance
memories.    A total of    8 memories are
used in two white balance memory systems.
ÔMenu screen settings for iris level (fine
adjust) and iris...

4
  Warnings and cautions when using
WARNING
Ù
ÙÙ ÙViewfinder lens hazard
ÔDo not point the eyelens toward the sun or other
bright light source.    There is danger of physical
burns and loss of eyesight.
ÔDo not place the viewfinder    with the lens pointed
toward the sun.    There is risk of burn damage to
the viewfinder interior.
CAUTION
Ù
ÙÙ ÙPower supply
The specified power supply input voltage of this
camera is 12 VDC.    Be sure to use the designated
power supply.
Ù
ÙÙ ÙDo not...

5
ç
çç çNote when using
NOTE
ññññññññññCCD characteristic phenomena
ññññññññññ
The following types of phenomena are innate characteristics of a charge
coupled device (CCD) and are not malfunctions.    Be aware of these when
using a CCD camera for broadcast or other demanding applications.
Smear
When a bright object is picked up, thin trails appear above and below the image.
The effect is more pronounced at high electronic shutter speeds.
Fixed pattern
When operate at high temperature, a fixed pattern...

6
ç
çç çFacility names and functions
 1 Viewfinder connector
Connect the accessory 1.5-inch viewfinder or the
separately sold GM-51 5-inch viewfinder.
 2 
Viewfinder horizontal lock lever
Secures the side to side position adjustment of
the 1.5-inch viewfinder.
 3 
Viewfinder front to rear lock screw
Secures the front to rear position adjustment of
the 1.5-inch viewfinder
 4 
CC/ND filter select knob
Selects filter to match the light source of the
scene.
 5 
Lens mount
Bayonet type lens mount.
 6...

7
ç
çç çFacility names and functions
12Auto white/black balance switch
AW B: Select for automatic white balance
adjustment.    Set the WHITE BAL switch
20
 to A or B to store the adjustment in
respective memory A or B.
ABB:  Select for automatic black balance
adjustment.    The adjustment is stored in a
special memory.
13
Shutter switch
Set to on to use the electronic shutter.    At the
SEL position, the shutter speed and mode are
changed in the range set beforehand at the
setting menu.
14
CS-2 switch...