Hitachi Projector CP-A200 User Manual

31
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the item. 
Then perform it according to the following table.
Item Description
ASPECTUsing the ▲/▼ buttons switches the mode for aspect ratio. 
For a computer signal
NORMAL 
 4:3 
 16:9 
 16:10
       
For a Video signal, S-video signal or Component video signal
4:3 
 16:9 
 14:9
     
For no signal
4:3...

32
IMAGE menu
IMAGE menu (continued)
Item Description
H POSITIONUsing the ▲/▼ buttons adjusts the horizontal position.
Left 
 Right
• Over-adjusting the horizontal position may cause noise to appear 
on the screen. If this occurs please reset the horizontal position to 
the default setting. Pressing RESET button when H POSITION is 
selected will reset H POSITION to the default setting.
• When this function is performed on a video signal, s-video signal, 
or component video signal, the range of this...

33
INPUT menu
INPUT menu
From the INPUT menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the item. 
Then perform it according to the following table.
Item Description
PROGRESSIVEUsing the ▲/▼ buttons switches the progress mode.
TV 
 FILM 
 TURN OFF
     
• This function is performed only for an interlaced signal at the 
VIDEO or S-VIDEO input, and for 480i@60 or 576i@50 signal at  
the...

34
INPUT menu
INPUT menu (continued)
Item Description
VIDEO FORMATThe video format for S-VIDEO port and VIDEO port can be set.
(1) Use the ◄/► buttons to select the input port.
(2)  Using the ▲/▼ buttons switches the mode 
for video format.
AUTO  
  NTSC  
  PAL  
  SECAM 
      N-PAL 
 M-PAL 
 NTSC4.43 
• This item is performed only for a video signal 
from VIDEO port or S-VIDEO port. 
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals....

35
INPUT menu
INPUT menu (continued)
Item Description
RESOLUTIONThe resolution for the COMPUTER IN1 and IN2 input signals can 
be set on this projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼ 
buttons and press the ► button.
The RESOLUTION menu will be displayed.
(2) In the RESOLUTION menu, select 
the resolution you wish to display using 
the ▲/▼ buttons. 
Selecting AUTO will set a resolution 
appropriate to the input signal.
(3) STANDARD
Pressing the ► or ENTER button when 
selecting...

36
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or the ENTER button to execute the 
item. Then perform it according to the following table.
Item Description
D-ZOOMUsing the ▲/▼ buttons adjusts the zoom.
Large 
 Small
D-SHIFT VUsing the ▲/▼ buttons adjusts the vertical picture position.
Up 
 Down
• The function is not available, if the D-ZOOM is adjusted to 100 (full 
screen) on...

37
Item Description
PERFECT FITThis item allows you to adjust the shape of the projected image in 
each of the corners and sides.
(1)  Choose a corner or side to adjust 
using the ▲/▼/◄/► buttons and 
press the ENTER or INPUT button.
(2)  Adjust the distortion as below. 
Use the ▲/▼/◄/► buttons to adjust 
the position of the corner.  
Use the ▲/▼ buttons to adjust the 
distortion of the top or bottom side, 
after defining the adjusting position 
with 
the ◄/► buttons.
Use the ◄/► buttons to adjust the...

38
SETUP menu
SETUP menu (continued)
Item Description
STANDBY MODEUsing ▲/▼ buttons switches the standby mode setting between 
NORMAL and SAVING. 
NORMAL 
 SAVING
When SAVING is selected, the power consumption in the standby 
mode is lowered with some functional restriction as below:
• When SAVING is selected, the communication control (RS-232C) 
is disabled except to turn the projector on while the projector is in 
the standby mode.
• When SAVING is selected, AUDIO OUT STANDBY setting of 
AUDIO (
39)...

39
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table below 
can be performed. Select an item using the ▲/▼ cursor 
buttons, and press the ► cursor button or the ENTER 
button to execute the item. Then perform it according to 
the following table.
Item Description
VOLUMEUsing the ▲/▼ buttons adjusts the volume.
High 
 Low
SPEAKERUsing the ▲/▼ buttons turns on/off the built-in speaker.
TURN ON 
 TURN OFF
When TURN OFF is selected, the built-in speaker does not work.
AUDIOThe combination...

40
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the item. 
Then perform it according to the following table.
Item Description
LANGUAGE
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.
ENGLISH 
 FRANÇAIS 
 DEUTSCH 
 ESPAÑOL
MENU POSITIONUsing the ▲/▼/◄/► buttons adjusts the menu position.
To quit the operation, press MENU button on...