Hitachi Projector CP-A200 User Manual

1
Projector
CP-A200
User's Manual (detailed)  
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this 
product. Be sure to read “Safety Guide” first. After reading them, store them in a 
safe place for future reference.WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in 
this manual.
• The reproduction, transfer or copy of all or any...

2
Contents
Contents
About this manual ...........1
Contents  ..................2
Projector features ...........3
Preparations ...............3
Contents of package ............. 3
Part names  ................4
Projector ...................... 4
Control buttons ................. 5
Ports ......................... 5
Remote control ................. 6
Setting up  .................7
Arrangement ................... 7
Connecting with your devices ..... 10
Connecting with a power supply . . . 12
Using the...

3
Projector features / Preparations
• Keep the original packing materials, for future reshipment. Be sure 
to use the original packing materials when moving the projector. Use special 
caution for the lens. NOTE
Projector features
This product realizes the large projection image of various image signals, even if 
in a small space. This product can offer you convenience and various uses by the 
following features.
Preparations
Contents of  package
Please see the “Checking the contents” section in the...

4
Part names
Part names
Projector
(1)  Control buttons
(See the following page.)
(2) Lamp cover (
59)
(3) Remote sensors (
14)
(4) Speaker (
39)
(5) Exhaust vents
(6) Lens door (
16, 17, 63)
(7) Ports (
5, 10)
(8) AC inlet (
12)
(9) Power switch (
16, 17)
(10) Security bar (
13)
(11)  Intake vents
(12) Filter unit (
61, 71)
(13) Elevator feet (
20)
(14)  Internal threads
These are threads for optional 
mounting accessories.
(15) Lens (
16, 63, 71)
(16) Mirror (
16, 63)
►Be careful not to...

5
MONITOR OUTCOMPUTER IN2COMPUTER IN1
CONTROLAUDIO
OUTS-VIDEO
Y         CB/PB    CR/PR
VIDEO        L           R
AUDIO IN3AUDIO IN1
2
Part names
Control buttons
(1) LAMP indicator (66, 67)
(2) TEMP indicator (
66, 67)
(3) POWER indicator (
16, 17, 66, 67)
(4) STANDBY/ON button (
16, 17)
(5) INPUT button (
18)
Buttons ◄/►/▲/▼
(6)  FOCUS +/- buttons 
   when no menu is displayed (
21), or 
Cursor ◄, ► buttons  
   when a menu is displayed (
24).
(7)  
MENU buttons 
   when no menu is displayed (...

6
Part names
Remote control
Back of  
the remote control (1)
(3)
(5)
(7)
(9)
(10)
(11)
(14)
(16)
(18)
(19)
(22)
(24)
(26)(2)
(4)
(6)
(8)
(12)
(13)
(15)
(17)
(21)
(20)
(23)
(25)
(27)
(28)
(1) COMPUTER button (18) 
(2) MY SOURCE/DOC.CAMERA button (
18, 46)
(3) VIDEO button (
18) 
(4) STANDBY/ON button (
16, 17)
(5) AUTO button (
21)
(6) SEARCH button (
19)
(7) ASPECT button (
19)
(8) BLANK button (
23)
(9) FREEZE button (
23)
(10) MAGNIFY - ON button (
23)
(11) MAGNIFY - OFF button (
15, 23)...

7
Setting up
Setting up
Arrangement
Install the projector in a stable, cool, dry and airy place, keeping a space of 30 cm 
or more between the sides of the projector and other objects such as walls.
Refer to the following to decide the projection style. For the case of installation 
in a special state such as ceiling mount, the specified mounting accessories and 
service may be required. Before installing the projector, consult your dealer about 
your installation.
(2) Ceiling mount
(1) Usual use
• When...

8
Setting up
A
C2
  C1
B2
B1
A
C2
  C1
B2B1
Table for 4:3 screen
Table for 16:9 screen (1)
(2)
inch cm inch cm inch cm inch cm inch
60 9.6 4 47.4 19 28.9 11 120.4 47
70 17.2 7 55.0 22 32.6 13 139.3 55
80 24.8 10 62.6 25 36.2 14 158.2 62
90 32.4 13 70.2 28 39.9 16 177.1 70
100 39.9 16 77.7 31 43.6 17 196.0 77
inch cm inch cm inch cm inch cm inch
60 13.7 5 51.5 20 43.5 17 118.3 47 
70 22.0 9 59.8 24 49.6 20 136.8 54 
80 30.2 12 68.0 27 55.7 22 155.3 61 
90 38.5 15 76.3 30 61.8 24 173.9 68 
100 46.6 18 84.4...

9
Setting up
►Place the projector in a stable horizontal position. If the 
projector falls or is knocked over it could cause injury and/or damage to the 
projector. Using a damaged projector could then result in fire and/or electric 
shock.
•  Do not place the projector on an unstable, slanted or vibrational surface such 
as a wobbly or inclined stand.
•  Do not place the projector on its side, front or rear position.
•  Consult with your dealer before a special installation such as suspending from 
a...

10
Setting up
(continued on next page)
MONITOR OUTCOMPUTER IN2COMPUTER IN1
CONTROLAUDIO
OUTS-VIDEO
Y         CB/PB    CR/PRVIDEO        L           RAUDIO IN3AUDIO IN1
2
RGB OUTAUDIO
OUTAUDIO
OUTRS-232C
          Y          CB/PB     CR/PRCOMPONENT VIDEO OUT L              R
 AUDIO  OUT L              R
 AUDIO  OUT L              R
 AUDIO  OUT S-VIDEO
    OUTVIDEO
OUT
RGB OUT
AUDIO IN
RGB IN
Connecting with your devices
Before connecting them, make sure that the devices are suitable to connect with 
this...