Hitachi Projector CP-A200 User Manual

41
SCREEN menu
SCREEN menu (continued)
Item Description
MyScreenThis item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and START UP 
screen. Display the image you want to capture before executing the 
following procedure.
1.  Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from 
the current screen.
Please wait for the target image to be displayed, and press the 
ENTER button when the image is...

42
SCREEN menu
SCREEN menu (continued)
Item Description
MESSAGEUsing the ▲/▼ buttons turns on/off the message function.
TURN ON 
 TURN OFF
When the TURN ON is selected, the following message function works.
“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“INVALID SCAN FREQ.”
“Searching…” while searching for the input
“Detecting…” while an input signal is detected
The indication of the input signal displayed by changing 
The indication of the aspect ratio...

43
SCREEN menu
SCREEN menu (continued)
Item Description
TEMPLATEUsing the ▲/▼ buttons switches the mode for the template screen. 
Press the ► button to display the selected template, and press the 
◄ button to close the displayed screen (
5).
The last selected template is displayed when the MY BUTTON 
allocated to the TEMPLATE function is pressed (
46).
 TEST PATTERN 
 DOT-LINE1
DOT-LINE4 
 DOT-LINE3 
 DOT-LINE2
• To focus the picture, use the FOCUS+/- buttons on the remote 
control while the...

44
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the item, 
except for the items LAMP TIME and FILTER TIME. Then 
perform it according to the following table.
Item Description
AUTO SEARCHUsing the ▲/▼ buttons turns on/off the automatic signal search 
function.
TURN ON 
 TURN OFF
When the TURN ON is selected, detecting no signal automatically 
cycles...

45
OPTION menu
OPTION menu (continued)
Item Description
AUTO POWER 
OFFUsing the ▲/▼ buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes) 
 Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector 
lamp will be turned off. 
If one of the projector's buttons or the...

46
Item Description
MY BUTTONThis item is to assign one of the following functions to MY BUTTON 
1 and 2 on the remote control (
6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button 
first. Then using the ▲/▼ buttons sets one of the following functions 
to the chosen button.
• COMPUTER1: Sets port to COMPUTER IN1.
• COMPUTER2: Sets port to COMPUTER IN2.
• COMPONENT: Sets port to COMPONENT (Y, C
B/PB, CR/PR)
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
•  
INFORMATION: Displays...

47
OPTION menu
OPTION menu (continued)
Item Description
SERVICE
(continued)FAN SPEED
Using the ▲/▼ buttons the rotation speed of the 
cooling fans. The HIGH is the mode for use at 
highlands etc. Note that the projector is noisier when 
the HIGH is selected.
HIGH 
 NORMAL
AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode. 
When the DISABLE is selected, the H/V.POSITION, 
H.SIZE and H.PHASE will be set to the default value 
if the automatic adjustment function is executed.
FINE 
 FAST 
...

48
OPTION menu
OPTION menu (continued)
Item Description
SERVICE
(continued)KEY LOCK
Using the ▲/▼ buttons turns on/off the key lock feature. When 
TURN ON is selected, the buttons on the projector except the 
STANDBY/ON button are locked.
TURN ON 
 TURN OFF
• Please use to avoid a mischief and touching accidentally. This 
function does not have any effect on the remote control.
FOCUS LOCK
Use the ▲/▼ buttons turns on/off the focus lock feature. When 
TURN ON is selected, the FOCUS +/- buttons on the...

49
Item Description
SERVICE
(continued)REMOTE RECEIV.
(1) Select a remote sensor using ▲/▼ buttons.
1:FRONT 
 2:TOP
(2) Switch it using the ENTER or INPUT button.
 (off) 
  (on)
• A sensor cannot be turned off when the other one is off.  Always at 
least one sensor is on.
REMOTE FREQ.
Use the ▲/▼ button to change the projector's remote sensor setting.
1:NORMAL 
 2:HIGH
Items with a checkmark are on. The factory 
default setting is for both 1:NORMAL and 
2:HIGH to be on.  If the remote control does...

50
OPTION menu
OPTION menu (continued)
Item Description
SECURITYThis projector is equipped with security functions.
User registration is required before using the security functions.
Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1  Use the ▲/▼ buttons on the OPTION 
menu to select SECURITY and press the 
► button. The ENTER PASSWORD box 
will be displayed. 
The factory default PASSWORD is 5310. 
This PASSWORD can be changed (1.2 Changing the PASSWORD 
 (...