Hitachi Projector CP-A200 User Manual

11
Setting up
Connecting with your devices (continued)
• Be sure to read the manuals for devices before connecting them to the 
projector, and make sure that all the devices are suitable to be connected with this 
product. Before connecting to a PC, check the signal level, the signal timing, and the 
resolution.
-  Some signal may need an adapter to input this projector.
-  Some PCs have multiple screen display modes that may include some signals which 
are not supported by this projector. 
-  Although...

12
Setting up
Connecting with a power supply
Before connection, confirm that the power 
outlet is suitable for this projector and the 
power cord.
Then follow the procedure below for 
connection.
AC Inlet
Power cord
(with the socket)
1.Insert the end of the power cord with the 
socket into the AC inlet of the projector.
2.Plug the other end of the power cord into 
a power outlet.
►Be careful of operation for a power supply not to cause an 
electric shock or a fire.
• Do not handle the power cord with the...

13
Setting up
►Be careful not to pinch the cables in the cable cover, to 
prevent damage to the cables.CAUTION
• These are not provided as 
comprehensive theft preventions but 
supplemental measures. NOTE
Using the security bar and slot
This projector has the security bar for a 
commercial anti-theft chain or wire up to 10 
mm in diameter, and also the security slot for 
the Kensington lock.
For details, see the manual of the security 
tool.Security slot
Security bar
Using the cable cover
Utilize the...

14
Remote control
Remote control
►Be careful of handling a battery, as a battery can cause explosion, 
cracking or leakage, which could result in a fire, an injury, and environment pollution.
• Use only the specified and new battery. Do not use a battery with damage, such 
as a scratch, a dent, rust or leakage. Do not mix a new battery with used one.
• When a battery leaked, wipe the leakage out well with a waste cloth. If the 
leakage adhered to your body, immediately rinse it well with water. When a...

15
VIDEODOC.CAMERA
KEYSTONE
ASPECT SEARCH
BLANK
MUTE
MY BUTTON
POSITION
12
ESCENTERMENURESET
COMPUTERMY SOURCE/
AUTO
MAGNIFYVOLUME
o ONOFF
9× FREEZE
      FOCUS                             D-ZOOM-           +           -            +
Remote control
Changing the frequency of  remote control signal
The accessory remote control has the two choices on signal 
frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote 
control does not function properly, attempt to change the 
signal frequency.
In order to set...

16
VIDEODOC.CAMERA
KEYSTONE
ASPECT SEARCH
BLANK
MUTE
MY BUTTONPOSITION12
ESCENTERMENURESET
COMPUTERMY SOURCE/AUTOMAGNIFYVOLUMEo ONOFF9× FREEZE
      FOCUS                             D-ZOOM-           +           -            +
LAMPTEMP
POWER
STANDBY/ON
INPUT
Power on/off
1.Press the side marked " I " of the power 
switch, as the power-on position.
The POWER indicator lights up in orange. 
2.Confirm that there is nothing that the lens 
door hits while opening. 
Then, press the STANDBY/ON button...

17
VIDEODOC.CAMERA
KEYSTONE
ASPECT SEARCH
BLANK
MUTE
MY BUTTONPOSITION12
ESCENTERMENURESET
COMPUTERMY SOURCE/AUTOMAGNIFYVOLUMEo ONOFF9× FREEZE
      FOCUS                             D-ZOOM-           +           -            +
LAMPTEMP
POWER
STANDBY/ON
INPUT
Power on/off
Turn off  the power
Turn the projector off after turning off the other connected devices, unless 
mentioned in the manuals. For this projector, follow the procedure below.
When you will not use the projector for a long while, unplug...

18
INPUT
MENU
VIDEODOC.CAMERA
KEYSTONE
ASPECT SEARCH
BLANK
MUTE
MY BUTTON
POSITION
12
MENU
COMPUTERMY SOURCE/
AUTO
MAGNIFYVOLUME
o ONOFF
9× FREEZE
      FOCUS                             D-ZOOM-           +           -            +
VIDEODOC.CAMERA
KEYSTONE
ASPECT SEARCH
BLANK
MUTE
MY BUTTON
POSITION
12
MENU
COMPUTERMY SOURCE/
AUTO
MAGNIFYVOLUME
o ONOFF
9× FREEZE
      FOCUS                             D-ZOOM-           +           -            +
VIDEODOC.CAMERA
KEYSTONE
ASPECT SEARCH
BLANK
MUTE
MY...

19
VIDEODOC.CAMERA
KEYSTONE
ASPECT SEARCH
BLANK
MUTE
MY BUTTON12
COMPUTERMY SOURCE/
AUTO
MAGNIFYVOLUME
o ONOFF
9× FREEZE
VIDEODOC.CAMERA
KEYSTONE
ASPECT SEARCH
BLANK
MUTE
MY BUTTON12
COMPUTERMY SOURCE/
AUTO
MAGNIFYVOLUME
o ONOFF
9× FREEZE
      FOCUS                             D-ZOOM-           +           -            +
VIDEODOC.CAMERA
KEYSTONE
ASPECT SEARCH
BLANK
MUTE
MY BUTTON12
COMPUTERMY SOURCE/
AUTO
MAGNIFYVOLUME
o ONOFF
9× FREEZE
Operating
1.
Press VIDEO button on the remote control.  
Each...

20
KEYSTONEMUTEMY BUTTON
POSITION
12
ESCENTERMENURESET
oOFF
      FOCUS                             D-ZOOM-           +           -            +
KEYSTONEMUTEMY BUTTON
POSITION
12
ESCENTERMENURESET
oOFF
      FOCUS                             D-ZOOM-           +           -            +
Operating
►Do not lengthen the elevator feet to 43 mm or more. The foot 
lengthened exceeding the limit may come off from the projector, and result in an injury.
►Tilt the projector with these elevating feet only.
►Do...