Home > Hitachi > Projector > Hitachi Projector CP-A200 User Manual

Hitachi Projector CP-A200 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Hitachi Projector CP-A200 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 913 Hitachi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							31
    IMAGE menu
    IMAGE menu
    From the IMAGE menu, items shown in the table below 
    can be performed.
    Select an item using the ▲/▼ cursor buttons, and press 
    the ► cursor button or ENTER button to execute the item. 
    Then perform it according to the following table.
    Item Description
    ASPECTUsing the ▲/▼ buttons switches the mode for aspect ratio. 
    For a computer signal
    NORMAL 
     4:3 
     16:9 
     16:10
           
    For a Video signal, S-video signal or Component video signal
    4:3 
     16:9 
     14:9
         
    For no signal
    4:3 (fixed)
    • The NORMAL mode keeps the original aspect ratio of the signal.
    OVER SCANUsing the ▲/▼ buttons adjusts the over-scan ratio.
    Large (It reduces picture) 
     Small (It magnifies picture)
    • This item can be selected only for a video, s-video and component 
    video signal.
    • When this adjustment is too large, certain degradation may appear 
    at the frame area of the picture. In such a case, please adjust small.
    V POSITIONUsing the ▲/▼ buttons adjusts the vertical position.
    Up 
     Down
    • Over-adjusting the vertical position may cause noise to appear 
    on the screen. If this occurs please reset the vertical position to the 
    default setting.  
    Pressing RESET button when V POSITION is selected will reset V 
    POSITION to the default setting.
    • When this function is performed on a video signal, s-video signal, 
    or component video signal, the range of this adjustment depends 
    on OVER SCAN (
    above) setting. It is not possible to adjust when 
    OVER SCAN is set to 10.
    (continued on next page) 
    						
    							32
    IMAGE menu
    IMAGE menu (continued)
    Item Description
    H POSITIONUsing the ▲/▼ buttons adjusts the horizontal position.
    Left 
     Right
    • Over-adjusting the horizontal position may cause noise to appear 
    on the screen. If this occurs please reset the horizontal position to 
    the default setting. Pressing RESET button when H POSITION is 
    selected will reset H POSITION to the default setting.
    • When this function is performed on a video signal, s-video signal, 
    or component video signal, the range of this adjustment depends on 
    OVER SCAN (
    31) setting. It is not possible to adjust when OVER 
    SCAN is set to 10.
    H PHASE
    Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker.
    Right 
     Left
    • This item can be selected only for a computer signal or component 
    video signal.
    H SIZEUsing the ▲/▼ buttons adjusts the horizontal size.
    Large 
     Small
    • 
    This item can be selected only for a computer signal.
    • When this adjustment is excessive, the picture may not be 
    displayed correctly.  In such a case, please reset the adjustment by 
    pressing the RESET button during this operation.
    AUTO ADJUST 
    EXECUTEExecuting this item performs the automatic adjustment feature.
    For a computer signal
    The vertical position, the horizontal position and the horizontal 
    phase (
    32) will be automatically adjusted. Make sure that the 
    application window is set to its maximum size prior to attempting to 
    use this feature. A dark picture may still be incorrectly adjusted. Use 
    a bright picture when adjusting.
    For a video signal and s-video signal
    The video format best suited for the respective input signal will 
    be selected automatically. This function is available only when 
    the AUTO is selected for the VIDEO FORMAT item in the INPUT 
    menu (
    34). The vertical position and horizontal position will be 
    automatically set to the default. 
    For a component video signal
    The vertical position, horizontal position and horizontal phase will 
    be automatically set to the default.
    • The automatic adjustment operation requires approx. 10 seconds. 
    Also please note that it may not function correctly with some input. 
    When this function is performed for a video signal, a certain extra 
    such as a line may appear outside a picture.
    • The items adjusted by this function may vary when the FINE or 
    DISABLE is selected for the AUTO ADJUST item of the SERVICE 
    item in the OPTION menu (
    47). 
    						
    							33
    INPUT menu
    INPUT menu
    From the INPUT menu, items shown in the table below 
    can be performed.
    Select an item using the ▲/▼ cursor buttons, and press 
    the ► cursor button or ENTER button to execute the item. 
    Then perform it according to the following table.
    Item Description
    PROGRESSIVEUsing the ▲/▼ buttons switches the progress mode.
    TV 
     FILM 
     TURN OFF
         
    • This function is performed only for an interlaced signal at the 
    VIDEO or S-VIDEO input, and for 480i@60 or 576i@50 signal at  
    the COMPONENT VIDEO input.
    • When TV or FILM is selected, the screen image will be sharp. 
    FILM adapts to the 2-3 Pull-Down conversion system. But these 
    may cause a certain defect (for example, jagged line) of the picture 
    for a quick moving object. In such a case, please select TURN OFF, 
    even though the screen image may lose the sharpness.
    VIDEO NRUsing the ▲/▼ buttons switches the noise reduction mode.
    HIGH 
     MID 
     LOW
          
    • This function is performed only for the VIDEO or S-VIDEO input, 
    and for 480i@60 or 576i@50 signal at the COMPONENT VIDEO 
    input.
    • When this function is excessive, it may cause a certain 
    degradation of the picture. 
    COLOR SPACEUsing the ▲/▼ buttons switches the mode for color space. 
    AUTO 
     RGB 
     SMPTE240 
     REC709 
     REC601
          
    • This item can be selected only for a computer signal or component 
    video signal except SCART RGB signal.
    • The AUTO mode automatically selects the optimum mode. 
    • The AUTO operation may not work well at some signals. In such a 
    case, it might be good to select a suitable mode except AUTO.
    COMPONENTUsing the ▲/▼ buttons switches the function of the COMPONENT 
    (Y, C
    B/PB, CR/PR) port.
    COMPONENT 
     SCART RGB
    When the SCART RGB is selected, COMPONENT (Y, C
    B/PB, CR/
    P
    R) and VIDEO ports will function as a SCART RGB port. A SCART 
    cable is required for a SCART RGB input to the projector. For your 
    reference, see the TECHNICAL part.
    (continued on next page) 
    						
    							34
    INPUT menu
    INPUT menu (continued)
    Item Description
    VIDEO FORMATThe video format for S-VIDEO port and VIDEO port can be set.
    (1) Use the ◄/► buttons to select the input port.
    (2)  Using the ▲/▼ buttons switches the mode 
    for video format.
    AUTO  
      NTSC  
      PAL  
      SECAM 
          N-PAL 
     M-PAL 
     NTSC4.43 
    • This item is performed only for a video signal 
    from VIDEO port or S-VIDEO port. 
    • The AUTO mode automatically selects the optimum mode.
    • The AUTO operation may not work well for some signals. If the 
    picture becomes unstable (e.g. an irregular picture, lack of color), 
    please select the mode according to the input signal.
    FRAME LOCKSet the frame lock function on/off for each port.
    (1)  Using the ▲/▼ buttons to select one of 
    following ports.
    COMPUTER (IN)1 
     COMPUTER (IN)2
    (2)  Using the ◄/► buttons to turns the 
    frame lock function on/off. 
    TURN ON 
     TURN OFF
    • This item can be performed only on a signal with a vertical 
    frequency of 50 to 60 Hz.
    • When the TURN ON is selected, a moving pictures are displayed 
    more smoothly.
    • This function may cause a certain degradation of the picture. In 
    such a case, please select TURN OFF.
    COMPUTER INThe computer input signal type for COMPUTER IN1 and IN2 ports 
    can be set.
    (1)  Use the ◄/► buttons to select the input 
    port to be set.
    COMPUTER (IN)1 
     COMPUTER (IN)2
    (2)  Use the ▲/▼ buttons to select the 
    computer input signal type.
    AUTO 
     SYNC ON G OFF
    Selecting AUTO allows reception of sync on G signal.
    • When AUTO is selected, the picture may be distorted with certain 
    input signals. In such a case, remove the signal connector first 
    and select SYNC ON G OFF on the menu, and then reconnect 
    the signal. Refer to “Technical” on how to input a component video 
    signal to the COMPUTER IN1 or IN2 port.
    (continued on next page) 
    						
    							35
    INPUT menu
    INPUT menu (continued)
    Item Description
    RESOLUTIONThe resolution for the COMPUTER IN1 and IN2 input signals can 
    be set on this projector.
    (1) In the INPUT menu select the RESOLUTION using the ▲/▼ 
    buttons and press the ► button.
    The RESOLUTION menu will be displayed.
    (2) In the RESOLUTION menu, select 
    the resolution you wish to display using 
    the ▲/▼ buttons. 
    Selecting AUTO will set a resolution 
    appropriate to the input signal.
    (3) STANDARD
    Pressing the ► or ENTER button when 
    selecting a STANDARD resolution will 
    automatically adjust the horizontal and 
    vertical positions, clock phase and 
    horizontal size and automatically select 
    an aspect ratio. 
    (3) CUSTOM
    (3)-1 To set a custom resolution use the 
    ▲/▼ buttons to select the CUSTOM 
    and the CUSTOM RESOLUTION 
    box will be displayed. Set the 
    horizontal (HORZ) and vertical 
    (VERT) resolutions using the ▲/▼
    /◄/► buttons. It is not guaranteed 
    to work this function properly on any 
    resolutions.
    (3)-2 To save the setting place the 
    cursor on the right-most digit and 
    press the ► button.
         The horizontal and vertical positions, 
    clock phase and horizontal size will 
    be automatically adjusted.
    (3)-3 To revert back to the previous 
    resolution without saving changes 
    place the cursor on the left-most 
    digit and press the ◄ button.
        The screen will then return to the 
    RESOLUTION menu displaying the 
    previous resolution.
    • For some pictures, this function may not work well.STANDARD  
    ↓
    CUSTOM 
    ↓ 
    						
    							36
    SETUP menu
    SETUP menu
    From the SETUP menu, items shown in the table below 
    can be performed.
    Select an item using the ▲/▼ cursor buttons, and press 
    the ► cursor button or the ENTER button to execute the 
    item. Then perform it according to the following table.
    Item Description
    D-ZOOMUsing the ▲/▼ buttons adjusts the zoom.
    Large 
     Small
    D-SHIFT VUsing the ▲/▼ buttons adjusts the vertical picture position.
    Up 
     Down
    • The function is not available, if the D-ZOOM is adjusted to 100 (full 
    screen) on its dialog.
    D-SHIFT HUsing the ▲/▼ buttons adjusts the horizontal picture position.
    Right 
     Left
    • The function is not available, if the D-ZOOM is adjusted to 100 (full 
    screen) on its dialog.
    KEYSTONE 
    Using the ▲/▼ buttons corrects the vertical keystone distortion.
    Shrink the top of the image 
     Shrink the bottom of the image
    • The adjustable range of this function will vary among inputs. For 
    some input, this function may not work well.
    • When the zoom adjustment is set to the TELE (telephoto focus), 
    this function may be excessive. This function should be used when 
    the zoom adjustment is set to the full WIDE (wide-angle focus) 
    whenever possible.
    • This function will be unavailable when the Transition Detector is 
    on (
    54) or the PERFECT FIT (37) is adjusted.
    KEYSTONE 
    Using the ▲/▼ buttons corrects the horizontal keystone distortion.
    Shrink the right of the image 
     Shrink the left of the image
    • The adjustable range of this function will vary among inputs. For 
    some input, this function may not work well.
    • When the zoom adjustment is set to the TELE (telephoto focus), 
    this function may be excessive. This function should be used when 
    the zoom adjustment is set to the full WIDE (wide-angle focus) 
    whenever possible.
    • This function will be unavailable when the Transition Detector is 
    on (
    54) or the PERFECT FIT (37) is adjusted.
    (continued on next page) 
    						
    							37
    Item Description
    PERFECT FITThis item allows you to adjust the shape of the projected image in 
    each of the corners and sides.
    (1)  Choose a corner or side to adjust 
    using the ▲/▼/◄/► buttons and 
    press the ENTER or INPUT button.
    (2)  Adjust the distortion as below. 
    Use the ▲/▼/◄/► buttons to adjust 
    the position of the corner.  
    Use the ▲/▼ buttons to adjust the 
    distortion of the top or bottom side, 
    after defining the adjusting position 
    with 
    the ◄/► buttons.
    Use the ◄/► buttons to adjust the distortion of the left or right side, 
    after defining the adjusting position with the ▲/▼ buttons.
    (3)  To adjust another corner or side, follow the same procedure 
    from (1) above.  
    To reset the adjustment of all the corners and sides, select RESET 
    with the ▲/▼ buttons and press the ENTER or INPUT button. 
    • While the distortion is adjusted with the PERFECT FIT function, 
    keystone adjustment feature is unavailable. To correct the keystone 
    distortion, reset the adjustment of all the corners and sides.
    • The adjustable range of this correction will vary among inputs. For 
    some input, this function may not work well.
    • One adjustment position common to the top and bottom sides can 
    be set. Also, another adjustment position common to the left and 
    right sides can be set. 
    • The distortion of the top and bottom sides can be adjusted only in 
    the same direction, pincushion or barrel. The adjustment for the left 
    and right sides is carried out in the same manner.
    • This function will be unavailable when the Transition Detector is 
    on (
    54).
    WHISPERUsing the ▲/▼ buttons turns off/on the whisper mode.
    NORMAL  WHISPER
    • When WHISPER is selected, acoustic noise and screen brightness 
    are reduced.
    MIRRORUsing the ▲/▼ buttons switches the mode for mirror status.
    NORMAL  H:INVERT  V:INVERT  H&V:INVERT
        
    If the Transition Detector is TURN ON and MIRROR status is 
    changed, Transition Detector Alarm (
    54) will be displayed when 
    projector is restarted after the power switch is turned off.
    SETUP menu
    SETUP menu (continued)
    (continued on next page) 
    						
    							38
    SETUP menu
    SETUP menu (continued)
    Item Description
    STANDBY MODEUsing ▲/▼ buttons switches the standby mode setting between 
    NORMAL and SAVING. 
    NORMAL 
     SAVING
    When SAVING is selected, the power consumption in the standby 
    mode is lowered with some functional restriction as below:
    • When SAVING is selected, the communication control (RS-232C) 
    is disabled except to turn the projector on while the projector is in 
    the standby mode.
    • When SAVING is selected, AUDIO OUT STANDBY setting of 
    AUDIO (
    39) is invalid, and no signal is output from AUDIO OUT 
    ports in the standby mode.
    MONITOR OUTThe combination of a picture shown on screen and output from the 
    MONITOR OUT port can be arranged in the menu.
    The picture coming into the port selected in the (2) is output to the 
    MONITOR OUT port while an image from the port chosen in the (1) 
    is on screen.
    (1) Choose a picture input port using ▲/▼ buttons.
    • Choose STANDBY, to select the output signal from the MONITOR 
    OUT port in the standby mode.
    • While QUIT is selected, pressing the ◄ button returns to the 
    previous menu.
    (2) Select one of the COMPUTER IN ports using ◄/► buttons.
    Choosing the COMPUTER 1 allows the following choice.
    1 (COMPUTER IN1) 
     OFF
    Choosing the COMPUTER 2 allows the following choice.
    2 (COMPUTER IN2) 
     OFF
    Choosing other input or STANDBY allows the following choice.
    1 (COMPUTER IN1) 
     2 (COMPUTER IN2)  
     OFF
       
    • OFF disables the MONITOR OUT port.
       QUIT 
     COMPUTER(IN)1 
     COMPUTER(IN)2
          
    	 
    STANDBY 
          
    	 
      
    VIDEO 
     S-VIDEO 
     COMPONENT 
              (Y, CB/PB, CR/PR) 
    						
    							39
    AUDIO menu
    AUDIO menu
    From the AUDIO menu, items shown in the table below 
    can be performed. Select an item using the ▲/▼ cursor 
    buttons, and press the ► cursor button or the ENTER 
    button to execute the item. Then perform it according to 
    the following table.
    Item Description
    VOLUMEUsing the ▲/▼ buttons adjusts the volume.
    High 
     Low
    SPEAKERUsing the ▲/▼ buttons turns on/off the built-in speaker.
    TURN ON 
     TURN OFF
    When TURN OFF is selected, the built-in speaker does not work.
    AUDIOThe combination of a picture and audio input port can be arranged 
    in the menu.
    The audio coming into the port selected in the (2) is output while an 
    image from the port chosen in the (1) is on screen.
    (1)  Choose a picture input port using the ▲/▼ buttons.
    • Choose AUDIO OUT STANDBY, to select the audio output to the 
    AUDIO OUT port in the standby mode. The built-in speaker does 
    not work in the standby mode.
    • While QUIT is selected, pressing the ◄ button returns to the 
    previous menu.
    (2)  Select one of the AUDIO IN ports using ◄/► buttons.
    1 (AUDIO IN1) 
     2 (AUDIO IN2) 
     3 (AUDIO IN3) 
      
    •  disables the audio output.
    • 
    When  is selected to VIDEO(NTSC), S-VIDEO(NTSC), 
    COMPONENT(480i@60), COMPUTER IN1(480i@60) and 
    COMPUTER IN2(480i@60), the C.C.(Closed Caption) is automatically 
    activated, if the C.C. is set to AUTO in the DISPLAY menu of the C.C. 
    menu and the signal from the input port supports the C.C. feature (
    58). 
       QUIT 
     COMPUTER(IN)1 
     COMPUTER(IN)2
          
    	 
    AUDIO OUT STANDBY 
          
    	 
      
    VIDEO 
     S-VIDEO 
     COMPONENT 
              (Y, CB/PB, CR/PR) 
    						
    							40
    SCREEN menu
    SCREEN menu
    From the SCREEN menu, items shown in the table below 
    can be performed.
    Select an item using the ▲/▼ cursor buttons, and press 
    the ► cursor button or ENTER button to execute the item. 
    Then perform it according to the following table.
    Item Description
    LANGUAGE
    Using the ▲/▼ buttons switches the OSD (On Screen Display) language.
    ENGLISH  FRANÇAIS  DEUTSCH  ESPAÑOL
    MENU POSITIONUsing the ▲/▼/◄/► buttons adjusts the menu position.
    To quit the operation, press MENU button on the remote control or 
    keep no operation for about 10 seconds.
    BLANKUsing the ▲/▼ buttons switches the mode for the BLANK screen.
    The BLANK screen is a screen for the temporarily blanking feature  
    (
    23). It is displayed by pressing BLANK button.
    MyScreen 
     ORIGINAL 
     BLUE 
     WHITE 
     BLACK
           
    Feature
    MyScreenScreen can be registered by the MyScreen item 
    (41).
    ORIGINAL Screen preset as the standard screen.
    BLUE, WHITE, 
    BLACKPlain screens in each color.
    • To avoid remaining as an afterimage, the MyScreen or ORIGINAL 
    screen will change to the plain black screen after several minutes.
    START UPUsing the ▲/▼ buttons switches the mode for the start-up screen.
    The start-up screen is a screen displayed when no signal or an 
    unsuitable signal is detected.
    MyScreen 
     ORIGINAL 
     TURN OFF
              
    Feature
    MyScreenScreen can be registered by the MyScreen item 
    (41).
    ORIGINAL Screen preset as the standard screen.
    TURN OFF Plain black screen.
    • To avoid remaining as an afterimage, the MyScreen or ORIGINAL 
    screen will change to the BLANK screen (
    40) after several 
    minutes. If also the BLANK screen is the MyScreen or ORIGINAL, 
    the plain black screen is instead used.
    • When the TURN ON is selected to the MyScreen PASSWORD of 
    SECURITY item in OPTION menu (
    51), the START UP is fixed to 
    MyScreen.
    (continued on next page)
    ...(shown in  the LANGUAGE dialog)... 
    						
    All Hitachi manuals Comments (0)

    Related Manuals for Hitachi Projector CP-A200 User Manual