Hitachi F7000 Instruction Manual

6.2.5 
6 - 11 
Select the Report tab, and the window in Fig. 6-7 will appear.   
For the settable range of each parameter, refer to Appendix G.   
 
 
 
Fig. 6-7  Report Tab  
 
 
1 Output  
• Print Report   
A report will be printed.    For printing method, refer to 6.9.   
• Use Microsoft(R) Excel   
Data will be transferred to Microsoft
(R) Excel.  For transferring 
method, refer to 7.13.   
• Use print generator sheet   
Select this method for using the report generator (option).     
For usage,...

6.2    Creating an Analysis Method 
6 - 12 
3 Print items (printable/transferable items) 
• Include date   
• Include instrument   
• Include graph   
When you put a check mark for this item, any of the graphs 
listed below is selectable.   
◊ Contour  
◊ Bird’s-eye view  
◊  Contour and Bird’s-eye view   
◊  Contour and Spectrum   
• Data listing   
◊ Interval  
◊ Start  
◊ End  
These parameters are settable when “Use Microsoft(R) Excel” 
or “Use print generator sheet” is specified for Output.   
For...

6.3 
6 - 13 
6.3  Defining Your Samples  
 
A sample must be defined in the following procedure before 
measurement.  
 
(1) Click the 
  (sample name/comment input) button on the 
Measurement toolbar.    The window in Fig. 6-8 will appear.   
 
 
 
Fig. 6-8   
 
 
(2)  Make entries for Sample name and Comment.   
Maximum number of enterable characters (half-size)   
Sample name :  40 characters   
Comment : 255 characters  
 
For automatic saving, put a check mark in the “Auto File” box to 
specify a...

6.4  Conducting Measurement 
6 - 14 
6.4  Conducting Measurement  
 
(1)  Make sure an analysis method has been set and a sample has 
been defined.    (Refer to “6.2 Creating an Analysis Method” and 
“6.3 Defining Your Samples.”)   
 
(2)  Set a sample in the sample compartment and click the 
 
button on the Measurement toolbar to start measurement.     
(See ①  in Fig. 6-9.)   
On this monitor window, the X and Y axes stand for the EM-side 
wavelength and time (s), respectively.   
 
 
 
Fig. 6-9...

6.4 
6 - 15 
If auto saving is not selected, select the “Save As” command from 
the File menu and save the data.    Opening the saved data file 
will display the data processing window as shown below.   
 
 
 
 
 
Fig. 6-10    Data Processing Window (3-D time scan)   
 
 
① Contour lines  
From these contour lines, the time-scan spectrum and emission, 
excitation or synchronous spectrum can be read out.   
As the cursor is moved, the cursor-specified time scan spectrum 
and emission, excitation or...

6.4  Conducting Measurement 
6 - 16 
④ Peak table  
Peak wavelength and peak height are indicated.    For setting 
threshold and sensitivity values, click the 
 button.  
 
NOTICE:  1.  The data measured under the following condition will be 
saved automatically in Program Files\FL Solutions\Data.   
(Example:  C:Program Files\FL Solutions\Data)  
(1)  Measurement was carried out with “Auto File” 
specified and a file name unspecified.   
2.  The data measured under the following conditions will 
be...

6.5 
6 - 17 
6.5    Displaying Data in a Bird’s-Eye View   
 
“3-D Time scan” data can be displayed in a bird’s-eye view.   
Select the 
  (bird’s-eye view) button on the Spectrum toolbar.     
(Or select the bird’s-eye view command from the View menu.)     
 
 
 
Fig. 6-11   
 
 
Viewing direction is changeable by clicking 
 (from front),  
(from rear), 
  (from left) or  (from right).  
Clicking 
  (contour line diagram) displays a contour line diagram.   
 
  

6.6    Contour Scale Expansion with Mouse 
6 - 18 
6.6    Contour Scale Expansion with Mouse   
 
In the contour display of 3-D time scan data, display scale can be 
expanded with the mouse.    On the Spectrum toolbar, click the 
 
(contour scale expansion) button.    The button is set in the clicked 
status.  
 
 
 
Fig. 6-12   
 
 
Move the mouse cursor onto the contour as shown in Fig. 6-13 and drag 
the mouse along an area to be expanded with the left mouse button 
held down.    

6.6 
6 - 19 
 
 
Fig. 6-13   
 
 
The area enclosed with the mouse cursor is now expanded as shown in 
Fig. 6-14.    For restoring the original display, click the 
 (scale 
reset) button.   
 
 
Fig. 6-14   
 
 
For using the trace cursor on the contour window, click 
 again for 
returning to the non-clicked status.    

6.7    Auto Scale Display of Data 
6 - 20 
6.7    Auto Scale Display of Data   
 
When you click the 
  (auto scale) button on the data processing 
window after completion of measurement or from which the 3-D time 
scan data file has been read out, the contour window, excitation 
spectrum window and emission spectrum window are displayed in the 
auto scale mode as shown in Fig. 6-16.   
 
 
Fig. 6-15    (Before execution of auto scale)   
 
 
 
Fig. 6-16    (After execution of auto scale)   
 
For...