Hitachi Cp-X5021n Projector Users Manual

31
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then 
perform it according to the following table.
Item Description
ASPECTUsing the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu (
36).
AUTO KEYSTONE Using the ► button executes the auto keystone function.See the AUTO KEYSTONE item in SETUP menu (43).
 KEYSTONEUsing the ◄/► buttons corrects the vertical keystone distortion.
See...

32
EASY MENU
Item Description
ECO MODEUsing the ◄/► buttons turns off/on the Eco mode.
See the ECO MODE item in SETUP menu (
44).
MIRRORUsing the ◄/► buttons switches the mode for mirror status.
See the MIRROR item in SETUP menu (
44).
RESETPerforming this item resets all of the EASY MENU items except the 
FILTER TIME and LANGUAGE.
A dialog is displayed for confirmation. Selecting the OK using the ► 
button performs resetting.
FILTER TIMEThe usage time of the air filter is shown in the menu.
Performing...

33
PICTURE menu
PICTURE menu
From the PICTURE menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the 
item. Then perform it according to the following table.
Item Description
BRIGHTNESSUsing the 
◄/► buttons adjusts the brightness.
Dark 
 Light
CONTRASTUsing the 
◄/► buttons adjusts the contrast.
Weak 
 Strong
GAMMAUsing the ▲/▼ buttons switches the gamma mode.
To adjust CUSTOM
Selecting a mode...

34
PICTURE menu
(continued on next page)
Item Description
COLOR TEMPUsing the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name includes 
CUSTOM and then pressing the ► button 
or the ENTER button displays a dialog 
to aid you in adjusting the OFFSET and 
GAIN of the selected mode.
OFFSET adjustments change the color intensity on the whole tones 
of the test pattern.
GAIN adjustments mainly affect color intensity on the brighter tones 
of the test pattern....

35
PICTURE menu
Item Description
SHARPNESSUsing the ◄/► buttons adjusts the sharpness.
Weak 
 Strong
• There may be some noise and/or the screen may flicker for a 
moment when an adjustment is made. This is not a malfunction.
ACTIVE IRIS
Using the ▲/▼ cursor buttons changes the active iris control mode.
PRESENTATION  
  THEATER  
  OFF
              
PRESENTATION :  The active iris displays the best presentation 
image for both bright and dark scenes.
THEATER :  The active iris displays the best...

36
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
Item Description
ASPECTUsing the ▲/▼ buttons switches the mode for aspect ratio. 
For a computer signal
CP-X4021N, CP-X5021N: NORMAL 
 4:3 
 16:9 
 16:10 
                                               
 
CP-WX4021N: NORMAL 
 4:3 
 16:9 
...

37
IMAGE menu
Item Description
V POSITIONUsing the ◄/► buttons adjusts the vertical position.
Down 
 Up
• Over-adjusting the vertical position may cause noise to appear on 
the screen. If this occurs, please reset the vertical position to the 
default setting. Pressing the RESET button when the V POSITION 
is selected will reset the V POSITION to the default setting.
• When this function is performed on a video signal or an s-video 
signal, the range of this adjustment depends on OVER SCAN (
36)...

38
IMAGE menu
Item Description
H PHASE
Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker.
Right 
 Left
• This item can be selected only for a computer signal or a 
component video signal. This function is unavailable for a signal 
from the LAN, USB TYPE A, USB TYPE B or HDMI port.
H SIZEUsing the ◄/► buttons adjusts the horizontal size.
Small 
 Large
• This item can be selected only for a computer signal. This function 
is unavailable for a signal from the LAN, USB TYPE A, USB TYPE...

39
INPUT menu
INPUT menu
From the INPUT menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
Item Description
PROGRESSIVEUsing the ▲/▼ buttons switches the progress mode.
TV 
 FILM 
 OFF
  
• This function works only for a video signal, s-video signal, component 
video signal (of 480i@60 or 576i@50 or 1080i@50/60) and an HDMI 
signal (of...

40
INPUT menu
(continued on next page)
Item Description
VIDEO FORMATThe video format for S-VIDEO port and VIDEO port can be set.
(1)  Use the ▲/▼ buttons to 
select the input port.
(2)  Using the ◄/► buttons 
switches the mode for video 
format.
AUTO  
  NTSC  
  PAL  
  SECAM
      N-PAL 
 M-PAL 
 NTSC4.43 
• This item is performed only for a video signal from the VIDEO port 
or the S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some...