Hitachi Cp-X5021n Projector Users Manual

71
SECURITY menu
This projector is equipped with security functions.
From the SECURITY menu, items shown in the table 
below can be performed.
To use SECURITY menu: User registration is required 
before using the security functions.
Enter the SECURITY menu
1.  Use the ▲/▼ buttons on the SECURITY menu to select ENTER PASSWORD and press the ► 
button. The ENTER PASSWORD box will be displayed.  
2.  Use the ▲/▼/◄/► buttons to enter the registered password. The 
factory default password is as follows....

72
SECURITY menu
Item Description
MyScreen 
PASSWORD
The MyScreen PASSWORD function can be used to prohibit access to the 
MyScreen function and prevent the currently registered MyScreen image 
from being overwritten.
1 Turning on the MyScreen PASSWORD
1-1  Use the ▲/▼ buttons on the SECURITY menu to 
select MyScreen PASSWORD and press the ► 
button to display the MyScreen PASSWORD on/
off menu.
1-2  Use the ▲/▼ buttons on the MyScreen 
PASSWORD on/off menu to select ON. 
The ENTER NEW PASSWORD box...

73
SECURITY menu
Item Description
PIN LOCK
PIN LOCK is a function which prevents the projector from being used unless 
a registered Code is input.
1 Turning on the PIN LOCK
1-1  Use the ▲/▼ buttons on the SECURITY menu to 
select PIN LOCK and press the ► button or the 
ENTER button to display the PIN LOCK on/off 
menu.
1-2  Use the ▲/▼ buttons on the PIN LOCK on/
off menu to select ON and the Enter PIN 
Code box will be displayed. 
1-3  Input a 4 part PIN code using the ▲/▼/◄/►, 
COMPUTER or INPUT...

74
SECURITY menu
Item Description
TRANSITION 
DETECTOR
If this function is set to ON when the vertical angle of 
the projector or MIRROR setting at which the projector 
is turned on is different than the previously recorded, the 
TRANSITION DETECTOR ON alarm will be displayed 
and the projector will not display the input signal.
• To display the signal again, set this function OFF.
• After about 5 minutes of displaying the TRANSITION DETECTOR ON 
alarm, the lamp will turn off.
• Keystone adjustment...

75
SECURITY menu
Item Description
MY TEXT 
PASSWORD
The MY TEXT PASSWORD function can prevent the MY TEXT from being 
overwritten. When the password is set for the MY TEXT;
• The MY TEXT DISPLAY menu will be unavailable, which can prohibit 
changing the DISPLAY setting.
• The MY TEXT WRITING menu will be unavailable, which can prevent the 
MY TEXT from being overwritten.
1 Turning on the MY TEXT PASSWORD
1-1  Use the ▲/▼ buttons on the SECURITY menu to 
select the MY TEXT PASSWORD and press the 
► button...

76
SECURITY menu
Item Description
MY TEXT 
DISPLAY
(1)  Use the ▲/▼ buttons on the SECURITY menu to 
select the MY TEXT DISPLAY and press the ► or 
ENTER button to display the MY TEXT DISPLAY 
on/off menu.
(2)  Use the ▲/▼ buttons on the MY TEXT DISPLAY on/off menu to select 
on or off.
ON 
 OFF
When it is set ON, the MY TEXT will be displayed 
on the START UP screen and the INPUT_
INFORMATION when the INFORMATION on the 
SERVICE menu is chosen.
• This function is available only when the MY TEXT...

77
Presentation tools
Presentation tools
The PC-LESS Presentation reads image data from storage media inserted into 
the USB TYPE A port and displays the image on the following modes. 
The PC-LESS Presentation can be started by selecting the USB TYPE A port as the input source.
This feature allows you to make your presentations without using your computer.
PC-LESS Presentation
- Thumbnail mode (78)
- Full Screen mode (
82)
- Slideshow mode (
83)
[Supported storage media]
• USB memory (USB memory type,...

78
Presentation tools
Thumbnail mode
PC-LESS Presentation (continued)
The Thumbnail mode displays the images stored in a USB storage device on the 
Thumbnail screen. Maximum 20 images are displayed in a screen.
If you wish, you can jump into the Full Screen mode or Slideshow mode, after you 
select some images in the Thumbnail mode.
The Thumbnail mode will be started as the primary function of the PC-LESS 
Presentation after selecting the USB TYPE A port as the input source.
Thumbnail menu
Selected...

79
Presentation tools
PC-LESS Presentation (continued)
The SETUP menu for the selected image
Item Functions
SETUPUse the ◄/► cursor buttons to switch each setting or use the 
► cursor button to execute the functions as follows.
RETURNPress the ► cursor button or ENTER to return to the Thumbnail 
screen.
STARTSwitch to ON to set the selected image as the first image in the 
Slideshow. This setting information will be saved in the “playlist.
txt” file (
85).
STOPSwitch to ON to set the selected image as the...

80
Presentation tools
You can also control the images by using the menu on the Thumbnail screen.
PC-LESS Presentation (continued)
Operating by the menu on the Thumbnail screen
Item Functions
Moves to an upper folder.
SORT Allows you to sort files and folders as following.
RETURNPress the ► cursor button or ENTER to return to the Thumbnail 
screen.
NAME UP Sorts in ascending order by file name.
NAME DOWN Sorts in descending order by file name.
DATE UP Sorts in ascending order by file date.
DATE DOWN Sorts in...