Hitachi Cp-X5021n Projector Users Manual

21
Operating
Selecting an aspect ratio
● ASPECT button does not work when no proper signal is inputted.
● NORMAL mode keeps the original aspect ratio setting.
1.Press SEARCH button on the remote control.
The projector will start to check its input ports as below in 
order to find any input signals.
When an input is found, the projector will stop searching 
and display the image. If no signal is found, the projector will 
return to the state selected before the operation.
Searching an input signal
●  While...

22
Operating
Adjusting the projector’s elevator
When the place to put the projector is slightly uneven 
to the left or right, use the elevator feet to place the 
projector horizontally. 
Using the feet can also tilt the projector in order to 
project at a suitable angle to the screen, elevating the 
front side of the projector within 12 degrees.
This projector has 2 elevator feet and 2 elevator buttons. 
An elevator foot is adjustable while pushing the elevator 
button on the same side as it.
To loose an...

23
Operating
Adjusting the lens 
1. 
Use the ZOOM ring to adjust the screen 
size.
2. 
Use the FOCUS ring to focus the picture.
3. 
Turn the VERTICAL adjuster fully counter 
clockwise. Then turn it clockwise and adjust 
the vertical lens position upward.
4. 
Turn the LOCK counter clockwise to loosen 
the lock of the HORIZONTAL adjuster.
5. 
Turn the HORIZONTAL adjuster clockwise 
or counter clockwise to adjust the horizontal 
lens position.
.1%-
FOCUS ring
ZOOM ring
LOCK 
(Horizontal
adjuster lock)...

24
Operating
1.
Press POSITION button on the remote control when no menu is 
indicated. 
The “POSITION” indication will appear on the screen.
Adjusting the position
2.
Use the ▲/▼/◄/► cursor buttons to adjust the picture position.
When you want to reset the operation, press RESET button on 
the remote control during the operation.
To complete this operation, press POSITION button again. Even if 
you do not do anything, the dialog will automatically disappear 
after a few seconds.
●  
When this function...

25
Operating
Correcting the distortion 
To correct the distortion of projected screen, you can select one of three options, 
AUTO, MANUAL and PERFECT FIT.
AUTO: performs the automatic vertical keystone 
correction. (
43)
MANUAL: allows you to adjust the vertical and 
horizontal keystone.
PERFECT FIT: allows you to adjust each of the screen 
corners and sides to correct the distortion.
1. 
First press the KEYSTONE button to display the KEYSTONE menu, and 
point at one of items with the ▲/▼ buttons. Then...

26
Operating
PERFECT FIT
2. 
When PERFECT FIT is pointed at, 
pressing the ► or ENTER button 
displays the KEYSTONE_PERFECT 
FIT dialog.
3. 
If it is necessary to initialize the 
current adjustment, point at RESET in 
the dialog with the RESET button, and 
press the ENTER or INPUT button.
4. 
Select one of the corners or sides 
to be adjusted with the ▲/▼/◄/► 
buttons and press the ENTER or 
INPUT button.
5. 
Adjust the selected part as below.
●  
For adjusting a corner, use the ▲/▼/◄/► buttons to adjust...

27
Operating
1.
Using the magnify feature
2.
MAGNIFY
ON/OFF button
VIDEODOC.CAMERA
KEYSTONE
ASPECT SEARCH
BLANK
MUTE
MY BUTTON12
COMPUTERMY SOURCE/
AUTO
MAGNIFYPAGE
      UPVOLUME
DOWNo ONOFF
9× FREEZE
3.
4.
5.
Press the MAGNIFY ON button on the remote control.  
The picture will be magnified, and the MAGNIFY dialog will 
appear on the screen. When the MAGNIFY ON button is 
pressed for the first time after the projector is turned on, the 
picture will be zoomed by 1.5 times. On the dialog, triangle 
marks...

28
1.Press BLANK button on the remote control.  
The BLANK screen will be displayed instead of the screen of 
input signal. Please refer to BLANK item in SCREEN menu 
(
48).
To exit from the BLANK screen and return to the input signal 
screen, press BLANK button again. 
Temporarily blanking the screen
●  The projector automatically exits from the BLANK mode when 
some control buttons are pressed.
• The sound is not connected with the BLANK screen function. If 
necessary, set the volume or mute first. To...

29
Operating
VIDE
ODOC.CAMERA
KEYSTONEASP
ECT
SEARCH
BLA
NK
MUTEMY BUTT
ONPOSITION1
2
ES
CENTERMENURES
ET
COMPUTERMY SOURC
E/AUTOMAGNIFYPAGE
      UPVOLUMEDOWNo ONOFF
9× FREEZE
RMENU
POSITION
ESCENTERMENU
RESET
E
UPOS
R
1.To start the MENU, press the MENU button. The MENU you last used (EASY 
or ADVANCED) will appear. EASY MENU has priority to appear just after 
powered on.
Using the menu function
2.
(1)  Use the ▲/▼ cursor buttons to select an item to 
operate. If you want to change it to the ADVANCED...

30
Using the menu function (continued)
3.To close the MENU, press the MENU button again or select EXIT and press 
the ◄ cursor button or ENTER button. Even if you do not do anything, the 
dialog will automatically disappear after about 30 seconds.
●  If you want to move the menu position, use the cursor buttons after pressing 
the POSITION button.
●  Some functions cannot be performed when a certain input port is selected, 
or when a certain input signal is displayed.
●  When you want to reset the...