Hitachi Cp-X3020 Projector Users Manual

42
SCREEN menu
Item Description
SOURCE NAMEEach input port for this projector can have a name applied to it.
(1)  Use the ▲/▼ buttons on the SCREEN menu to select SOURCE 
NAME and press the ► or ENTER button.  
The SOURCE NAME menu will be displayed.
(2)  Use the ▲/▼ buttons on the SOURCE 
NAME menu to select the port to be 
named and press the ► button. The 
SOURCE NAME dialog will be displayed.
Right side of the menu is blank until a 
name is specied.
(3)  
Select an icon youd like to assign to the...

43
SCREEN menu
Item Description
TEMPLATEUsing the ▲/▼ buttons switches the mode for the template screen. 
Press the ► button to display the selected template, and press the 
◄ button to close the displayed screen.
The last selected template is displayed when the MY BUTTON 
allocated to the TEMPLATE function is pressed (
	47).
TEST PATTERN 
Ù DOT-LINE1 
Ù DOT-LINE2 
Ù DOT-LINE3
     
Ú                                                                              
Ú
MAP
 
Ù MAP1 
Ù CIRCLE2 
Ù CIRCLE1 
Ù...

44
SCREEN menu
Item Description
C.C.
(Closed Caption)The C.C. is the function that displays a 
transcript or dialog of the audio portion of 
a video, les or other presentation or other 
relevant sounds. It is required to have NTSC 
format video or 480i@60 format component 
video source supporting C.C. feature to 
utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, please turn off the Closed Caption.
DISPLAY
Select Closed Caption DISPLAY setting from...

45
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item, except for the items LAMP TIME 
and FILTER TIME. Then perform it according to the 
following table
Item Description
AUTO SEARCHUsing the ▲/▼ buttons turns on/off the automatic signal search 
function.
ON 
Ù OFF
When the ON is selected, detecting no signal automatically cycles 
through input...

46
OPTION menu
Item Description
AUTO POWER 
OFFUsing the ▲/▼ buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes) 
Ù Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector 
lamp will be turned off. 
If one of the projectors buttons or the remote control buttons 
is...

47
OPTION menu
Item Description
MY BUTTON
You can use this item  to assign one of the following functions to the 
BLANK button on the control panel (
	5) and the MY BUTTON 1/2 
buttons on the remote control (
	6).
(1)  Choose a button to assign a function from BLANK, MY 
BUTTON-1 and MY BUTTON-2. Use the ▲/▼ buttons to select 
the desired button on the menu and press the ► button.
(2)  Then using the ▲/▼/◄/► buttons sets one of the following 
functions to the chosen button. Press the ENTER or INPUT...

48
OPTION menu
Item Description
SERVICESelecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ buttons, 
and press the ► button or the ENTER 
button on the remote control to execute 
the item.
FAN SPEED
Using the ▲/▼ buttons switches the rotation speed of the cooling 
fans. The HIGH is the mode for use at highlands etc. Note that the 
projector is noisier when the HIGH is selected.
HIGH 
Ù NORMAL
AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode. When the 
DISABLE is...

49
OPTION menu
Item Description
SERVICE
(continued)KEY LOCK
Using the ▲/▼ buttons turns on/off the key lock feature. When ON 
is selected, the buttons on the projector except the STANDBY/ON 
button are locked.
ON 
Ù OFF
• Please use this function to prevent tampering or accidental 
operation. This function does not have any effect on the remote 
control.
INFORMATION
Selecting this item displays a dialog titled “INPUT_INFORMATION”. 
It shows the information about the current input.
• The “FRAME LOCK”...

50
SECURITY menu
This projector is equipped with security functions.
From the SECURITY menu, items shown in the table 
below can be performed.
To use SECURITY menu: User registration is required 
before using the security functions.
Enter the SECURITY menu
1.  Use the ▲/▼ buttons on the SECURITY menu to select ENTER PASSWORD and press the ► 
button. The ENTER PASSWORD box will be displayed.  
2.  Use the ▲/▼/◄/► buttons to enter the registered password. 
The factory default password is 4410. This...

51
SECURITY menu
Item Description
MyScreen
PASSWORD
The MyScreen PASSWORD function can be used to prohibit access to the 
MyScreen function and prevent the currently registered MyScreen image 
from being overwritten.
1 Turning on the MyScreen PASSWORD1-1  Use the ▲/▼ buttons on the SECURITY menu to 
select MyScreen PASSWORD and press the ► 
button to display the MyScreen PASSWORD on/
off menu.
1-2  Use the ▲/▼ buttons on the MyScreen 
PASSWORD on/off menu to select ON. 
The ENTER NEW PASSWORD box (small)...