Hitachi Cp-X3020 Projector Users Manual

32
IMAGE menu
Item Description
H PHASE
Using the ◄/► buttons adjusts the horizontal phase to eliminate icker.
Right 
Ù Left
• This item can be selected only for a computer signal or a 
component video signal.
H SIZEUsing the ◄/► buttons adjusts the horizontal size.
Small 
Ù Large
• This item can be selected only for a computer signal.
• When this adjustment is excessive, the picture may not be 
displayed correctly. In such a case, please reset the adjustment 
by pressing the RESET button on the remote...

33
INPUT menu
INPUT menu
From the INPUT menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
Item Description
PROGRESSIVEUsing the ▲/▼ buttons switches the progress mode.
TV 
Ù FILM 
Ù OFF
  
• This function is performed only for a video signal, s-video signal or 
component video signal of 480i@60 or 576i@50.
• When TV or FILM is selected,...

34
INPUT menu
Item Description
VIDEO FORMATThe video format for S-VIDEO port and VIDEO port can be set.
(1)  Use the ▲/▼ buttons to 
select the input port.
S-VIDEO 
Ù VIDEO
(2)  Using the ◄/► buttons 
switches the mode for video 
format.
AUTO  
Ù  NTSC  
Ù  PAL  
Ù  SECAM
      N-PAL 
Ù M-PAL 
Ù NTSC4.43 
• This item is performed only for a video signal from the VIDEO port 
or the S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some...

35
INPUT menu
Item Description
RESOLUTIONThe resolution for the COMPUTER IN1 and COMPUTER IN2 input 
signals can be set on this projector.
(1)  In the INPUT menu select the RESOLUTION using the ▲/▼ 
buttons and press the ► button. 
The RESOLUTION menu will be  
displayed.
(2)  In the RESOLUTION menu select the 
resolution you wish to display using 
the ▲/▼ buttons.  
Selecting AUTO will set a resolution 
appropriate to the input signal.
(3)  Pressing the ► or ENTER button when 
selecting a STANDARD...

36
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
Item Description
AUTO KEYSTONE
Selecting this item performs the Automatic keystone distortion 
correction. Projector automatically corrects vertical keystone distortion 
due to the (forward/backward) setup angle by itself.
This function will be...

37
SETUP menu
Item Description
ECO MODEUsing the ▲/▼ buttons turns off/on the eco mode.
NORMAL 
Ù ECO
• When the ECO is selected, acoustic noise and screen brightness 
are reduced.
MIRRORUsing the ▲/▼ buttons switches the mode for mirror status.
NORMAL 
Ù H:INVERT 
Ù V:INVERT 
Ù H&V:INVERT
    
If the Transition Detector is on and MIRROR status is changed, 
TRANSITION DETECTOR ON alarm (	53) will be displayed when 
projector is restarted after the AC power is turned off.
STANDBY MODEUsing ▲/▼ buttons...

38
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table 
below can be performed. Select an item using the 
▲/▼ cursor buttons, and press the ► cursor button 
or the ENTER button to execute the item. Then 
perform it according to the following table.
Item Description
VOLUMEUsing the ◄/► buttons adjusts the volume.
High 
Ù Low
SPEAKERUsing the ▲/▼ buttons turns on/off the built-in speaker.
ON 
Ù OFF
When OFF is selected, the built-in speaker does not work.
AUDIO SOURCE
While the image signal...

39
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
Item Description
LANGUAGEUsing the ▲/▼/◄/► buttons switches the OSD (On Screen 
Display) language.
ENGLISH 
Ù FRANÇAIS 
Ù DEUTSCH 
Ù  ESPAÑOL
       
  (shown in the LANGUAGE dialog)  
Press the ENTER or INPUT button to save the language...

40
SCREEN menu
Item Description
MyScreenThis item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and START UP 
screen. Display the image you want to capture before executing the 
following procedure.
1.  Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from 
the current screen.
Please wait for the target image to be displayed, and press the 
ENTER or INPUT button when the image is displayed. The...

41
SCREEN menu
Item Description
MyScreen LockUsing the ▲/▼ buttons turns on/off the MyScreen lock function.
ON 
Ù OFF
When the ON is selected, the item MyScreen is locked. Use this 
function for protecting the current MyScreen.
• This function cannot be selected when the ON is selected to the 
MyScreen PASSWORD item in SECURITY menu (
	51).
MESSAGEUsing the ▲/▼ buttons turns on/off the message function.
ON 
Ù OFF
When the ON is selected, the following message function works.
“AUTO IN PROGRESS” while...