Hitachi Cp-X10000 Users Manual

21
Operating
Using the functions for the lens
ZOOM / FOCUS
Press the ZOOM / FOCUS button. The ZOOM / FOCUS dialog 
will appear. Adjust the zoom / focus using the ◄/► button while 
the dialog is displayed. Press the ▼ button to select "EXIT" on 
the dialog. It finishes the OSD menu.
LENS SHIFT
Press the LENS SHIFT button. The LENS SHIFT dialog 
will appear. Using the ▲/▼/◄/► buttons while the dialog 
is displayed shifts the lens. 
   
In the LENS SHIFT dialog:  
Press the 
DIGITAL button.
   
In...

22
Operating
1.
1.Press the VIDEO button to select an input for video signal.  
Each time you press the button, the projector switches its 
video input port as below. 
Press the 
DIGITAL  button to select an input for digital signal.  
Each time you press the button, the projector switches its 
digital input port as below. 
● While ON is selected for AUTO SEARCH item in OPTION menu, the projector 
will keep checking every port sequentially till an input signal is detected (
47). 
If 
VIDEO button is...

23
Operating
1.Press the AUTO button on the remote control.
Pressing this button performs the following.
Using the automatic adjustment feature
   For a computer signal 
The vertical position, the horizontal position and the 
horizontal phase will be automatically adjusted. 
Make sure that the application window is set to its 
maximum size prior to attempting to use this feature. 
A dark picture may still be incorrectly adjusted. Use a 
bright picture when adjusting.
   For a video signal and s-video...

24
Operating
1.Press the POSITION button on the remote control when no 
menu is indicated. 
The “POSITION” indication will appear on the screen.
Adjusting the position
2.Use the ▲/▼/◄/► cursor buttons to adjust the picture position.
When you want to reset the operation, press the RESET 
button on the remote control during the operation.
To complete this operation, press the 
POSITION button 
again. Even if you do not do anything, the dialog will 
automatically disappear after a few seconds.
●  
When this...

25
Operating
• The zoom level can be finely adjusted. Closely watch the screen to 
find the level you want. NOTE
1.Press the ON button of MAGNIFY on the remote control.  
The “MAGNIFY” indication will appear on the screen and 
the projector will go into the MAGNIFY mode. In the Magnify 
mode, the picture will be zoomed. The indication will 
disappear in several seconds with no operation.
Using the magnify feature
2.Use the ▲/▼ cursor buttons to adjust the zoom level. To move the zoom 
area, press the...

26
Operating
1.Press the BLANK button on the remote control.  
The blank screen will be displayed instead of the screen of 
input signal. Please refer to the BLANK item in SCREEN 
menu (
42).
To exit from the blank screen and return to the input signal 
screen, press the 
BLANK button again. 
Temporarily blanking the screen
●  The projector automatically exits from the BLANK mode when some control 
buttons are pressed.
1.Pressing the SHUTTER button closes or opens the mechanical lens shutter. 
The...

27
Operating
Most of operations are effective for the main area 
only. Also the audio input signal paired with the 
picture input signal for the main area is assigned 
as the audio output signal. The main area can be 
changed using the cursor buttons ◄/► when the 
setting information is on the screen.
PbyP (Picture by Picture)
The PbyP is a function to display two different picture signals on a screen that is 
split in two areas for each signal. Some of functions can be used with the same 
operation as...

28
Operating
BLANKLASER
FREEZE
LASER
INDICATOR
DIGITAL
STANDBY/ON
COMPUTER
LENS SHIFT KEYSTONEID 3
ID 4
ID 2 ID 1VIDEO
AUTO ASPECTRESETMENU
MAGNIFYON
OFF
3
4
ENTER
FOCUS+
-
POSITION
PbyP
ZOOM+
-
1
2
MY BUTTON
MY SOURCE
SHUTTER
BLANK
LASER
FREEZE
LASER
INDICATOR
DIGITAL
STANDBY/ON
COMPUTER
LENS SHIFT KEYSTONEID 3
ID 4
ID 2 ID 1VIDEO
AUTO
 ASPECTRESET
MENU
MAGNIFYON
OFF
3
4
ENTER
FOCUS+
-
POSITION
PbyP
ZOOM+
-
1
2
MY BUTTON
MY SOURCE
SHUTTER
To start the MENU, press the MENU button. The MENU 
you last used...

29
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control. Then perform it according 
to the following table.
ItemDescription
ASPECT Using the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE
 menu
 (
34).
AUTO 
KEYSTONE Using the ► button executes the auto keystone function.
See the AUTO KEYSTONE item in SETUP menu (
40).
 
 KEYSTONE Using the ◄/► buttons...

30
EASY MENU
ItemDescription
ECO MODE Using the ◄/► buttons turns off/on the eco mode.
See the ECO MODE item in SETUP menu
 (
41).
MIRROR Using the ◄/► buttons switches the mode for mirror status.
See the MIRROR item in SETUP menu
 (
41).
RESET Performing this item resets all of the EASY MENU items except the 
FILTER TIME and LANGUAGE.
A dialog is displayed for confirmation. Selecting the OK using the 
► 
button performs resetting.
FILTER TIME The usage time of the air filter is shown in the menu....