Handspring Visor Edge Handheld User Guide

							Chapter 7 Page 163
To open an e-mail item:
nTap an e-mail item to open it.
To close an e-mail item:
nTap Done to close the e-mail item.
Displaying full header information
By default, Mail displays abbreviated header information, which 
comprises only the From: and Subj: fields. The full header provides 
complete information about the sender, receiver, and copied 
recipients, in addition to the subject and date the e-mail item was 
created. Mail uses the header type you select for all your e-mail items.
To display full header information:
1. Open an e-mail item.
2. Tap the Complete Header icon.
Tip:
To redisplay the abbreviated header, tap the Abbreviated 
Header icon. 
Creating e-mail items
You create e-mail items with your handheld the same way you create 
e-mail with your desktop E-mail application: you identify the 
recipient(s) of the e-mail item, define a subject, and create the body of 
the e-mail item.
You create original e-mail items and replies in the New Message 
screen. All e-mail items must, at the very least, contain information in 
the To: and Subj: fields. 
Recipient
Sender
Time and date sent
E-mail body SubjectHeader mode icons 
						

							Page 164  Communicating Using Your Handheld
To create an e-mail item:
1. Tap New.
Tip:
You can also create an e-mail item by tapping New from 
the Message menu.
2. Enter the e-mail address of the recipient.
Note:
Enter the address as if you were entering it from your 
desktop E-Mail application. For example, network users 
sending an e-mail item to a user on the same network do 
not need to add Internet information, such as 
@mycorp.com.
3. To send a copy of this e-mail item to additional recipients, tap the 
CC: field, and then enter the e-mail addresses of the additional 
recipients, separating the addresses with a comma followed by a 
space.
4. Tap the Subj: field and enter a subject for your e-mail item. 
5. Tap the Body: field and enter the text of your e-mail item.
Tap New 
						

							Chapter 7 Page 165
Tip:
If the address, CC, subject, or body exceeds the capacity 
of the screen display, tap the name of the field (for 
example, tap “To:”) to expand that field. Tap the Done 
button to return to the New Message screen.
To reply to an e-mail item:
1. Tap an e-mail item in the Message list to display it onscreen.
2. Tap Reply.
3. Select whom you want to receive the reply: Sender only, All 
recipients, or someone who didn’t see the original e-mail item 
(Forward).
4. Select whether you want to include original text or comment 
original text.
5. Tap OK.
6. Enter the text of your reply.
Tip:
You have several options including setting the priority. 
See “Adding details to e-mail items” later in this chapter.
7. Tap Send to place your reply in the Outbox.
Tap to return to New Message screen Tap the name of the field to open 
						

							Page 166  Communicating Using Your Handheld
Looking up an address
To identify the recipient of an e-mail item, you need to enter that 
person’s e-mail address. You can do this either by entering the data 
directly into the field or by using the Look Up command to access the 
information in your Address list. 
To look up an e-mail address:
1. Tap either the To: or CC: field name to expand it.
2. Enter the first few letters of the last name of the person whose 
address you want to find. 
3. Tap Lookup. 
4. If the letters you enter identify a unique listing from your Address 
list, your handheld completes the address for you. If not, the 
Lookup dialog box appears and lists all records that contain 
information in an E-mail field.
Tip:
You can also open the Look Up dialog box in the New 
Message screen by tapping Lookup from the Options 
menu or by using the Graffiti
® Command stroke /L. 
5. Enter the first letter of the entry you want to find to scroll to the 
first entry that begins with that letter. If you write an additional 
letter, the list scrolls to the first entry that starts with those two 
letters. For example, writing an “s” scrolls to “Sanders,” and 
writing “sm” scrolls to “Smith.”
6. Tap an address to select it.
7. Tap Add.
Tap Lookup 
						

							Chapter 7 Page 167
Adding details to e-mail items
Before you send your e-mail item, you can attach additional attributes 
to it, such as a signature or a priority level. These features are 
dependent on the desktop E-mail application you use. If your 
application does not support the attribute you select, your handheld 
cannot attach that attribute to the e-mail item.
The following details are available:
Note:
The Priority and BCC settings are valid only for the current 
e-mail item and must be set for each item you create. Priority
Flags an e-mail item as High, Normal, or Low 
priority.
BCC
Creates a blind carbon copy field in the New 
Message screen. 
Signature
Attaches previously defined text as the closing of an 
e-mail item. See “Adding a signature to your e-mail 
item” later in this chapter.
Confirm 
ReadRequests a confirmation telling you when the 
e-mail item was read.
Confirm 
DeliveryRequests a confirmation telling you when the 
e-mail item was delivered.
Tap here to enter address in field
Tap to select 
						

							Page 168  Communicating Using Your Handheld
Setting a priority
To set a priority for your e-mail item:
1. In the New Message screen, tap Details.
2. Tap the Priority pick list and select the priority you want.
3. Tap OK.
Tip:
Your handheld can flag e-mail items with a specific priority 
only if your desktop E-Mail application supports this feature.
Tap here
Tap here
Tap to select priority 
						

							Chapter 7 Page 169
Sending a blind carbon copy
To add a BCC field to your e-mail item:
1. In the New Message screen, tap Details.
2. Tap the BCC check box to select it.
3. Tap OK.
4. Tap the BCC: field and enter an address. 
Adding a signature to your e-mail item
A signature consists of information about yourself that is appended to 
your e-mail item as its closing. For example, a signature can contain 
your name, address, phone and fax numbers, and any other text you 
want to include. By defining such information as a signature, you save 
yourself the trouble of having to enter it every time you create an 
e-mail item. 
Adding a signature to your message is a two-part process. First, you 
create your signature. Then you select the Signature option. 
To create a signature:
1. Tap the Menu icon  .
2. Tap Options, and then tap Preferences.
3. Tap the Signature text field and enter the text of your signature. 
BCC field 
						

							Page 170  Communicating Using Your Handheld
4. Tap OK.
To add a signature to your e-mail item:
1. In the New Message screen, tap Details.
2. Tap the Signature check box to select it and add your signature to 
the e-mail item.
Note:
The check box stays selected, so all subsequent e-mail 
items you create will also contain your signature until you 
deselect the Signature option. 
3. Tap OK.
Note:
The signature does not display in your e-mail item; only your 
recipient sees the signature.
Requesting confirmations
To receive a confirmation when your e-mail item is read:
1. In the New Message screen, tap Details.
2. Tap the Confirm Read check box to select it. 
3. Tap OK.
To receive a confirmation when your e-mail item is delivered:
1. In the New Message screen, tap Details.
2. Select the Confirm Delivery check box to select it. 
3. Tap OK.
Add signature 
text here 
						

							Chapter 7 Page 171
Storing e-mail to be sent later
When you send e-mail from your handheld, it actually stores the 
e-mail in the Outbox folder until the next time you synchronize your 
handheld with your computer. During synchronization, all e-mail 
stored in the Outbox folder is transferred to the Outbox folder in your 
desktop E-Mail application. E-mail created on your handheld is sent 
out the next time you send mail from your desktop E-Mail application.
To send e-mail:
nAfter you create an e-mail item, tap Send. 
Editing unsent e-mail
You can make changes to an e-mail that has not yet been sent, as long 
as you have not yet performed a HotSync operation. When you edit an 
e-mail item, your handheld removes the item from the Outbox folder 
and takes you back to the New Message screen, where you can edit the 
item and resend it, save it as a draft, or delete it.
To retrieve an e-mail item:
1. In the Message list, tap Outbox from the pick list in the upper-right 
corner.
2. Tap the e-mail item you want to retrieve.
Tap here to display folder  
						

							Page 172  Communicating Using Your Handheld
3. Tap Edit.
Draft e-mail
Sometimes you may not want to send an e-mail item immediately; for 
example, you may want to add additional information before sending 
it. Your handheld stores such e-mail items in the Draft folder until you 
are ready to edit them again.
Note:
When you’re creating or editing an e-mail item, you can also 
save the item as a draft by canceling it. When you cancel an 
item, your handheld opens a dialog asking if you want to save 
the e-mail item. If you tap Yes, your handheld saves the item 
in the Draft folder.
To save an e-mail item as a draft:
1. Create an e-mail item.
2. Tap the Menu icon  .
3. Tap Message, and then tap Save Draft.
To edit an e-mail item saved as a draft:
1. In the Message list, tap Draft from the pick list in the upper-right 
corner.
2. Tap the draft you want to display.
Tap here 
to select 
item
Tap to 
edit item