Handspring Treo 90 Handheld User Guide

							Chapter 7Page 141
Time, date, week start, and numbers formats
The Time setting defines the format for the time of day. The time format that you select appears 
in all applications on your handheld. 
To select the time, date, week start, and numbers format:
1. Tap the Time pick list and select a format. 
2. Tap the Date pick list and select a format.
3. Tap the Week starts pick list, and select whether you want the first day of the week to be 
Sunday or Monday. 
Note: This setting controls the Day, Week, Month, Year, and List views in Date Book Plus 
and all other aspects of your handheld that display a calendar.
4. Tap the Numbers pick list, and select formats for the decimal point and thousands separator.
General Preferences
The General Preferences screen enables you to set the auto shutoff interval, sounds for your 
handheld, the alarm LED, and the beam receive feature. 
Auto-off delay
Your handheld has an automatic shutoff feature that turns off the power after a period of 
inactivity. This feature conserves battery power if you forget to turn off your handheld. If you find 
that your handheld shuts itself off before you finish viewing information on the screen, increase 
the auto-off setting.
To set the Auto-off delay:
1. Tap the Auto-off After pick list. 
2. Tap the setting you want to use for the automatic shutoff feature: 30 seconds, 1 minute, 2 
minutes, or 3 minutes. 
 
  
						

							Page 142  Setting Preferences for Your Handheld
System, alarm, and game sounds
Your handheld uses a variety of sounds. The System, Alarm, and Game Sound settings enable 
you to turn the sounds on or off, to adjust the volume level, and to turn the Alarm LED option on 
and off.
To set the system, alarm, and game sounds:
1. Tap the System Sound pick list and select the sound level. 
Note: When you turn off the System Sounds, you also turn off the “chime” tones associated 
with the HotSync operation. 
2. Tap the Alarm Sound pick list and select the sound level. 
3. Tap the Alarm LED pick list and select On if you want the LED to blink for two minutes when 
an alarm goes off, or select Off if you don’t want the LED to blink. 
4. Tap the Game Sound pick list and select the sound level.
Note: The Game Sound setting works only with games that are programmed to respond to 
this setting. Older games typically do not respond to this setting. 
Network Preferences and TCP/IP software
Network Preferences let you set a password, telephone number, DNS number, IP address, as well 
as create a login script for remote connections. For example, if you have a data-enabled mobile 
phone and want to use the modem inside the phone to connect to the Internet. TCP/IP provides 
the ability to connect to your ISP or dial-in server with applications that allow you to view the 
transmitted data. 
To use TCP/IP software, you must first configure the Connection Preferences and then the 
Network Preferences settings. After you configure both of these Preferences, you can establish 
a PPP (Point-to-Point Protocol), SLIP (Serial Line Internet Protocol), or CSLIP (Compressed 
Serial Line Internet Protocol) connection with your ISP or dial-in server. You can do this either by 
using menu commands from the Network Preferences screen or by using a third-party 
application. 
Selecting a service
Use the Service setting to select the service template for your ISP or a dial-in server. Service 
templates are a set of ISP and dial-in server configuration settings that you can create, save, and 
reuse.  
						

							Chapter 7Page 143
To select a service:
1. Tap the Service pick list.
2. Tap the predefined service template.
Note: If you want to enter a name for a new service template, see page 147 for details.
Entering a user name
The User Name setting identifies the name you use when you log into your Internet Service 
Provider or your dial-in server. Although this field can contain multiple lines of text, only two lines 
appear onscreen.
To enter a user name:
1. Tap the User Name field. 
2. Enter your user name.
Note: Most dial-in servers do not accept spaces in the user name.
Tap here to display a list 
of service templates
Enter your user name 
here 
						

							Page 144  Setting Preferences for Your Handheld
Entering a password
The Password box identifies the password you use to log into your server or ISP. Your entry in 
this field determines whether your handheld prompts you to enter a password each time you log 
into your network:
nIf you do not enter a password, your handheld displays the word “Prompt” in this field and asks 
you to enter a password during the login procedure. 
nIf you enter a password, your handheld displays the word “Assigned” in this field and does not 
prompt you to enter a password during the login procedure.
Note: If you are concerned about security, select the Prompt option and do not enter a 
password.
To enter a password:
1. Tap the Password field.
2. Enter the password you use to log into your server.
3. Hold Option   and press Return   to finish.
Note: The Password field updates to display the word “Assigned.”
Selecting a connection
The Connection Preferences settings tell your handheld about the hardware you are using for 
remote data connections. For example, you can use a data-enabled mobile phone with an IR port 
or a special cable to connect the phone to your handheld. See the section that begins on page 
139 for details on how to configure Connection Preferences.
To select a connection:
1. Tap the Connection pick list.
The list displays the configurations in your Connection Preferences panel.
Enter password here
Tap here 
						

							Chapter 7Page 145
2. Select the appropriate Connection.
Adding telephone settings
When you select the Phone field, your handheld opens a dialog box in which you define the 
telephone number you use to connect with your ISP or dial-in server. In addition, you can also 
define a prefix, disable Call Waiting, and give special instructions for using a calling card.
Note: The Phone Setup dialog box works correctly for AT&T and Sprint long-distance services. 
However, because MCI works differently, MCI customers need to put the calling card 
number in the Phone # field and the phone number in the Use calling card field.
To enter your server phone number:
1. Tap the Phone field.
2. Enter the phone number you use to reach your ISP or dial-in server.
3. If you need to enter a prefix or disable Call Waiting, skip to those procedures. Otherwise, hold 
Option   and press Return   to finish.
Entering a prefix
A prefix is a number that you dial before the telephone number to access an outside line. For 
example, many offices require that you dial “9” to dial a number outside the building.
Tap to display a list of 
connection configurations
Enter your ISP phone 
number here 
						

							Page 146  Setting Preferences for Your Handheld
To enter a prefix:
1. Tap the Dial Prefix check box to select it.
2. Enter the prefix. 
3. Hold Option   and press Return   to finish.
Disabling Call Waiting
Call Waiting can cause your session to terminate if you receive a call while you are connected. If 
your telephone has Call Waiting, you need to disable this feature before logging into your ISP or 
dial-in server.
To disable Call Waiting:
1. Tap the Disable call waiting check box to select it.
2. Enter the code to disable Call Waiting on the Disable call waiting line.
Note: Each telephone company assigns a code to disable Call Waiting. Contact your local 
telephone company for the code that is appropriate for you.
3. Hold Option   and press Return   to finish.
Using a calling card
The Use calling card field enables you to use your calling card when dialing your ISP or Intranet 
server. Keep in mind that there is usually a delay before you enter your calling card number. When 
you define your calling card number, you need to add commas at the beginning to compensate 
for this delay. Each comma delays transmission of your calling card number for two seconds.
Enter your 
prefix here Select this 
box if you 
need to use 
a prefix
Enter your disable 
code here Select this 
box if you 
need to 
disable Call 
Waiting 
						

							Chapter 7Page 147
To use a calling card:
1. Tap the Use calling card check box to select it.
2. Enter your calling card number on the Use calling card line.
Note: It’s a good idea to add at least three commas at the beginning of your calling card 
number to compensate for the cue delay.
Tip: MCI customers must enter the calling card number in the Phone # field, and the 
phone number in the Use Calling Card field.
3. Hold Option   and press Return   to finish.
Connecting to your service
After you set your Connection and Network Preferences, establishing a connection to your 
Internet Service Provider (ISP) or your company’s network (dial-in server) is easy.
To establish a connection:
nTap Connect to dial the current service and display the Service Connection Progress 
messages. 
Tip: To see expanded Service Connection Progress messages, press the bottom scroll 
button.
To close a connection:
nTap Disconnect to terminate the connection between your handheld and your service.
Creating additional service templates
You can create additional service templates from scratch or by duplicating existing templates and 
editing information. After you create a new or duplicate template, you can add and edit settings.
To add a new service template:
1. Press Menu  . 
2. Under Service, select New (/N).
A new service template (called Untitled) is added to the Service pick list.
Enter your 
calling card 
number here Select this 
box to use a 
calling card 
						

							Page 148  Setting Preferences for Your Handheld
To duplicate an existing service template:
1. Tap the Service pick list.
2. Tap the predefined service template you want to duplicate.
3. Press Menu  . 
4. Under Service, select Duplicate (/L).
A copy of the service template is added to the Service pick list.
Adding detailed information to a service template
If you are using one of the predefined service templates, you probably only need to enter your 
user name and telephone number. If you are creating a new service template, you may need to 
provide additional information to your ISP or dial-in server. You use the Details dialog box to add 
additional information to a selected service template.
To select a connection type:
1. Tap the service field.
2. Tap Details.
3. Tap the Connection type pick list and select one of the following connection types:
Note: If you are not sure, try PPP; if that doesn’t work, ask your Internet Service Provider or your 
System Administrator for the correct connection type. PPPPoint-to-Point protocol
SLIPSerial Line Internet Protocol
CSLIPCompressed Serial Line Internet Protocol
Select connection type 
						

							Chapter 7Page 149
Idle timeout
The Idle timeout setting defines how long your handheld waits before dropping the connection 
with your ISP or dial-in server when you switch out of a TCP/IP application.
To set the Idle timeout:
1. Tap the Idle timeout pick list and select one of the following options:
2. Hold Option   and press Return   to finish.
Defining primary and secondary DNS
The Domain Naming System (DNS) is a mechanism in the Internet for translating the names of 
host computers into IP addresses. When you enter a DNS number (or IP address), you are 
identifying a specific server that handles the translation services.
Each IP address has four sections, separated by periods. In the Details dialog box, you enter each 
section separately. Each section of an IP address is made up of a number from 0 to 255; numbers 
are the only allowable characters in this field.
Ask your Internet Service Provider or System Administrator for the correct Primary or Secondary 
DNS IP numbers.
Note: Most Internet Service Providers automatically provide DNS information. Leave the Query 
DNS option checked unless you are certain you need to manually enter DNS information.
To enter a primary and secondary DNS:
1. Tap the Query DNS check box to deselect it.
2. Tap the space to the left of the first period in the Primary DNS field, and then enter the first 
section of the IP address. 
Note: Each section must be a number from 0 to 255.
3. Repeat step 2 for the second, third, and last sections of the Primary DNS field.
4. Repeat steps 2 and 3 for the Secondary DNS number.
5. Hold Option   and press Return   to finish.1 minuteWaits one minute for you to open another application before it drops the 
connection. 
2 minutesWaits two minutes. 
3 minutesWaits three minutes. 
NeverKeeps your PPP or SLIP connection until you turn off your handheld (or until it 
times out). See page 141 for information on the Auto-off delay setting. 
						

							Page 150  Setting Preferences for Your Handheld
IP address
Everyone who logs on to the Internet needs to have a unique identifier (an IP address), whether 
permanent or temporary. Some networks dynamically assign a temporary IP address when clients 
log in. The IP Address field lets you identify whether your network provides automatic (dynamic) 
temporary IP addressing.
Note: Most Internet Service Providers automatically assign IP addresses. Leave the Automatic 
IP Address option checked unless you are certain you need to manually enter IP address 
information.
To identify dynamic IP addressing:
nTap the IP Address check box to select it.
To enter a permanent IP address:
1. Tap the IP Address check box to deselect it and display a permanent IP address field below 
the check box.
2. Tap the space to the left of the first period then enter the first section of the IP address. 
Note: Each section must be a number from 0 to 255.
3. Tap and enter the remaining sections of the IP address.
4. Hold Option   and press Return   to finish.
Creating a login script
A login script is a series of commands, similar to an autoexec.bat file, that automates logging into 
your ISP. You can create login script files by selecting commands from the Command pick list in 
the Login Script dialog. Some commands from the Command pick list, such as Send, require you 
to supply additional information. Those commands have a parameter field so that you can add the 
necessary data.
Note: You can also use non-ASCII and literal characters in your login script. See Appendix D 
for more information.
To create a login script:
1. Tap Script.
2. Tap the End pick list.
Tap to select 
automatic IP 
address