Haier Afd631gr Instructions For Use

							Preparation prior to use
Connection to power supplyWhen the refrigerator is connected to power supply, the fridge temperature and freezer
temperature are automatically set to 5 and -18 respectively.
Operation modes of the refrigeratorManual adjustment mode: can set temperature by pressing the temperature setup key
(see “Function description” hereafter).
Loading the refrigerator with foodLoad the refrigerator with food after it has been operates for
a period and the inside is cool enough.
Some time will be required for the refrigerator to reach the set temperature when
the setting is changed. The length of this period depends on the difference between
the existing and set temperatures, ambient temperature, door opening frequency
and the amount of food in storage. Note
8
 
						

							Function introduction
Control panel
9
(1)Definition of keys
B1 power switch: press it for3stokeeptherefrigerator in a standby status, the refrigerator
stops working, and the display panel stops displaying. Except B1 key, other keys can not
control.
B2 Menu key: select the refrigerating, freezing, and timing interfaces via the Menu key. U-
nder non-locking status, it is effective when the key is pressed.
B3 adjusting key: after selecting the refrigerating, freezing, and timing interfaces via the M-
enu key, the adjusting key achieves refrigerating temperature adjustment, freezing tem-
perature adjustment and timing adjustment respectively. Press the key to confirm t-
he settings. Under non-locking status, it is effective when the key is pressed.
B4 Set key: press the Set key to select the quick refrigeration, holiday mode, and freezing
functions. By pressing the key, the D icon lights up and blinks, by pressing it again,
the D icon extinguishes and the E icon blinks; by pressing it again, the E icon extinguis-
hes and the F icon blinks; by pressing it again, the F icon extinguishes and the D icon b-
links, which are recycled successively. Under non-locking status, it is effective when t-
he key is pressed.
B5 OK key: enter or exit the selected functions/keep pressing for3stoenterthelockingfu-
nction or release the locking function, which is effective when the key is pressed.
The A, B and C icons are displayed when the refrigerator is initially powered on.
Each key operation is performed accompanied by a beep.Set
Set
 
						

							Function introduction
10
(2) Locking/unlocking
The G icon is displayed, indicating that the panel is under locking status. At this time, by pr-
essing the B5 OK key and holding it for 3 s, the G icon disappears, such that the panel can
be unlocked. By pressing the B5 OK key again and holding it for 3 s, the G icon is displayed
, such that the panel can be locked again.
(3) Refrigerating chamber temperature adjustment (2~8 ) (operation under unlocking status)
After the Menu key is pressed, the set value A icon of the original refrigerating chamber sta-
rts blinking, entering the refrigerating chamber temperature setting mode.
Afterwards, when adjusting the B3 key, the temperature value increases by 1 each time the
B3 is pressed, recycling among 02~08~OF. Press the OK key to determine the selection.
When the refrigerating chamber is set at the OF position, the refrigerating chamber is dea-
ctivated; when it is set at other temperature positions, the refrigerating chamber is activated
and refrigerating. If the key operation is not performed within5sorotherkeysarepressed
during the adjustment, then the set value is not confirmed and is returned to the original set
position.
(4) Freezing chamber temperature adjustment (-16~-24 ) (operation under unlocking status)
Select the freezing temperature settings via the Menu key, the original freezing chamber s-
et temperature icon B starts blinking, entering the freezing chamber temperature setting s-
tatus.
Afterwards, the freezing chamber temperature decreases by 1 each time the B3 is pressed,
recycling between -16~-24. Press the OK key to determine the selection. If the key operat-
ionisnotperformedwithin5sorotherkeysarepressedduringtheadjustment, then the te-
mperature set value is not confirmed and is returned to the original set position.
(5) Timing setting:
1. When dispatched from the factory, the timing region displays 00, the alarm clock icon
does not light up, without entering the timing status.
2. Under the unlocking status, by selecting the Menu key to select the timing region, the f-
igure 00 blinks. Then, press the adjust key to set the timing to 00 ~ 99 ~ 00. By p-
ressing the adjust key, the timing increases by 1; by keeping on pressing the adjust k-
ey, the timing increases by degrees quickly at a certain speed to the time of completion o-
f the selection. Each time the timing key is pressed, the buzzer beeps once. By pressin-
g the OK key to confirm the start of countdown, the alarm clock icon is displayed.
4. Special function 1: if time adjustment is required by the user during the countdown, by s-
electing the Menu key to select the timing region, the figure blinks, and then by pressing
the adjust key, the figure changes and recycles from the currently displayed time to 99
~00~99, and after the adjustment is done, the countdown starts by pressing the OK
key to confirm.
5. Special function 2: if timing is required to be stopped by the user during the countdown,
first by selecting the Menu key to select the timing region and pressing the adjust key,
the figure blinks and is adjusted to 00 via the adjust key, and by pressing the OK key
to confirm, the alarm clock icon extinguishes to exit the timing function. 3. When the countdown goes to “00”, the figure “00” blinks , the buzzer alarms and the
“alarm clock” icon extinguishes. The buzzer stops alarming and the figure stops blinking
after the user presses the “Set” key.
 
						

							Function introduction
11
 
						

							About the fridge storage compartment
Please put the food to be stored for short period or for daily
consumption in the fridge storage compartment:
Although the average temperature in most areas in the fridge storage
compartment can be regulated between 0 and 10 , extended
period of food storage is not recommended. The fridge storage
compartment should only be used for short-term storage.
Adjusting shelf height
The shelf can be relocated to accommodate food size or height. To
adjust the height of a shelf, remove it first in this way: uplift its front
edge and then pull it out.
To install the shelf, put the dogs on both sides of the shelf on the
supporting ribs and push it to the most inward end.
Fruit & Vegetable box
Fresh control box
Disassemble of Clean the bottle
The refrigerator has a crisper. You can adjust the humidity inside it
according to the properties of the foods.
Turning the humidity control button rightward enables the
crisper to keep in a higher humidity suitable for cucumbers, grapes,
Chinese gooseberries, persimmons, etc.
Turning the humidity control button leftward enables the crisper
to keep in a lower humidity suitable for strawberries, oranges, beans,
garlic, watermelon, plums, tomatoes, etc.
The temperature in this box is kept at approx 0 , it may be slightly
changed due to the different ambient temperature or refrigerator
working style. It is suitable to store fresh fish, meat and cooked food
in 1~2 days.
To take out a bottle guard, uplift the bottle guards in direction and
grip both sides and pull it out in direction . After cleaning, install it
with the operation in the reversed direction.
12
 
						

							About the fridge storage compartment
Use of the foldaway shelfFig. shows the extended state of the foldaway shelf in which
you can put lower food containers.
Fig. shows the folded state of the foldaway shelf in which
you can put higher food containers.
To fold the shelf from state to state , simply push structure
A upwards, and push structure B inward in the direction of the
arrow shown in the figure.
To extend the shelf from state to state , push structure A
upwards, and pull structure B in the direction of the arrow
shown in the figure.
Use of the wire wine holderFig. shows the folded state of the wire wine holder. In this
state large space can be spared.
Fig. shows the extended state of the wire wine holder. In
this state it can hold various wines.
To extend it from state to state , simply pull the wire
down.The maximum load of the bottle holder is 10 kg.
To fold it from state to state , simply push the wire up.
Notemake sure to keep the two ends of a shelf on the same level.
Otherwise it may fall or the food on it may dump.
Recommended storage areas for various foods
As cold air circulates inside the refrigerator, there is
temperature difference inside the fridge storage
compartment. Different foods should be placed in
different areas according to their properties.
Eggs, butter, cheese and etc.
Drinks, canned food and etc.
Seasonings and pickled food
Beverages, canned food, cake, etc.
Wine, champagne, etc.
Milk, cheese, etc
Cooked meat, fresh fish and meat, etc.
Fruit, vegetables, salad, etc.
Lamp in the fridge storage compartment and its replacement
Parameters of the lamp: 12V, max 5W(the power depends on the model). The lamp
adopts LED as its light source, featuring low energy consumption and long service life. If
there is any abnormality, please contact the after-sales service personnel.
13
 
						

							Fridge storage precautions
Hot foods must be cooled to room
temperature before storing in the refrigerator.Clean the food and dry any droplets on it
before placing in the refrigerator.
Food to be stored should be properly sealed.
This will prevent moisture in the food from
evaporating and prevent them from spoiling.Sorted storage of food.
Food to be stored should be sorted according
to their category. Food consumed daily should
be placed on the front part of the shelves. This
can avoid unnecessary delays in door opening
as well as expiration of the storage period
because you forgot to eat it.
Do not store excess quantities of food.
Food should be stored with spaces in between
them. This allows cold air to flow smoothly and
therefore obtain better storage results.Do not place the food too near to the inner
walls.
Do not store foods with high moisture content
clinging to the inner walls. Otherwise they may
freeze to the walls. Place food a little away
from the inner walls.
Avoiding food (especially oil food) contact with the inner liner directly, as oil can
erode the inner liner. So its better to clean the oily dirt whenever it is found.
Note
14
 
						

							Tips on food storage in the fridge storage compartment
For turnip radish and other similar
vegetables, please cut off their leaves
before storage so as to prevent the
nutrition from being absorbed by the
leaves.Defreeze frozen food in the fridge storage
compartment. In this way you can use the
frozen food to decrease the temperature in
the compartment and save energy.
Some vegetables, for example, onion,
garlic, ginger, water chestnut, and other
rhizomatic foods, can be stored for long
periods at normal temperature. There is no
need to store them in the refrigerator.The metabolism of vegetable marrow,
melons, pawpaw, banana, pineapple can
be quickened in the refrigerator, so it is not
suitable to store them in the fridge storage
compartment. But storing green fruits in
the refrigerator for certain periods can
promote its maturing.
15
 
						

							Freezer storage precautions
Hot food should not be stored in the
refrigerator until it has cooled down to
room temperatureFood cut into small portions will freeze
faster and be easier to defrost and cook.
The recommended weight for each portion
is less than 2.5kg.
Its better to pack food before putting it in
the freezer. The outside of the packing
must be dry to avoid bags sticking together.
Packing materials should be odor-free,
airtight, non-poisonous and nontoxic.In order to avoid expiration of storage
period, please note the freezing date, time
limit and name of the food on the packing
according to the storage periods of
different foods.
Only take the required amount of food
from the freezer. Defrosted food cannot be
re-frozen unless it is first cooked,
otherwise it may be less edible.Do not load excessive quantities of fresh
food in the freezer. It is better to refer to
the cooling capacity of the refrigerator.
(See “Technical data”.)
DMYDMY
16
 
						

							Defrosting ·Cleaning
Defrosting the freezer
The freezer defrosts automatically. No manual operation is needed.
Cleaning
The refrigerator should be cleaned regularly to prevent bad stored food
odors.
For safety, unplug the power cord before cleaning the refrigerator.
Clean the refrigerator with a soft cloth or sponge with warm water (can
be added with mild detergent).
Dry water droplets on the refrigerator surfaces with a dry cloth.
Use of the cleaning filter (on some models)
The design service life is from 5 to 6 years. But as the kind and
concentration of odors in each refrigerator is uncertain due to different
operation condition and environment, we recommend you to set the
replacement cycle within 3 years.
After prolonged use, you can put it under sunshine for 30 minutes to
recover the deodorization effect. To clean, please use slow water flow.
The refrigerator is very heavy. When you are moving it for cleaning or repairs,
take care not to damage the floor. Keep the refrigerator upright during moving. Do
not move the refrigerator by rocking it to avoid damage to the floor.
Do not spray or flush the refrigerator with water to avoid impact on its electrical
insulation property.
Do not clean with hard brush, wire brush, detergent powder, gasoline, amyl
acetate, acetone and similar organic solutions, warm water or acid or alkaline
solutions. Please clean with special refrigerator detergent to avoid damage.
Do not touch the cold iron parts with wet hands, otherwise your skin may stick on
the cold iron parts.
When cleaning, do not clean the cold glass shelves with warm water. Otherwise
the glass may break due to sudden temperature change and cause personal injury
or property loss.
Note
Always keep the door gasket clean.
17