GE Vivid 7 Service Manual

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 1 - Introduction 1 - 63
1-5-29      Labe l, Disassembly Nester, Part 1 (L eft Part of Label) (cont’d)
(Label introduced September 2005.)
Figure 1-19   Label, Disassembly Nester, Part 1 (Left Part of Label) 

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
1 - 64 Section 1-5 - Labels Locations
1-5-29      Labe l, Disassembly Nester, Part 1 (L eft Part of Label) (cont’d)
(Label used before September 2005.)
 
Figure 1-20   Label, Disassembly Instru ction, Part 1 (Left Part of Label)
DISASSEMBLY INSTRUCTIONS
Remove all screws on rear side of monitor cover, and remove cover. 
Remove all screws on rear side of monitor front cover, and remove front cover.
Remove all screws on the cover...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 1 - Introduction 1 - 65
1-5-30 Label, Disassembly Nester,  Part 2 (Right Part of Label)
Located on the outside of the Front-End Card Rack’s Cover (inside unit)
(Label introduced October 1, 2007)
Figure 1-21   Label, Di sassembly Instruction, Part 2 (Right Part of Label)
Special items/material Location information
1 Lithium  BEP battery
2  Lead  BEP standby battery (option)
3  Printed circuit boards  Circuit boards inside...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
1 - 66 Section 1-5 - Labels Locations
1-5-30      Labe l, Disassembly Nester, Part 2 (R ight Part of Label) (cont’d)
(Label introduced September 2005)
Figure 1-22   Label, Di sassembly Instruction, Part 2 (Right Part of Label) 

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 1 - Introduction 1 - 67
1-5-30      Labe l, Disassembly Nester, Part 2 (R ight Part of Label) (cont’d)
(Label used before 2005)
 
Figure 1-23   Label, Disassembly Instru ction, Part 2 (Right Part of Label)
PARTS DESCRIPTION DISPOSITION
Painted sheet metal, aluzinc steel Recyclable metal after cleaning
Sheet metal, aluzinc Recyclable metal
Printed circuit boards Recycling
Cables Recyclable metal. All cables are UL 
listed....

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
1 - 68 Section 1-6 - Dangerous Procedure Warnings
Section 1-6
Dangerous Procedure Warnings
Warnings, such as the example below, precede po tentially dangerous procedures throughout this 
manual. Instructions contained in the warnings must be followed.
DANGERDANGEROUS VOLTAGES, CAPABLE OF  CAUSING DEATH, ARE PRESENT IN 
THIS EQUIPMENT. USE  EXTREME CAUTION WHEN HANDLING, TESTING AND 
ADJUSTING.
WARNINGWARNINGIF THE COVERS ARE...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 1 - Introduction 1 - 69
Section 1-7
Lockout/Tagout (LOTO) Requirements
Follow OSHA Lockout/Tagout requirements (USA)  or local Lockout/Tagout requirements by ensuring 
you are in total control of the AC power  plug at all times during the service process.
To apply Lockout/Tagout:
1.) Plan and prepare for shutdown.
2.) Shutdown the equipment.
3.) Isolate the equipment.
4.) Apply Lockout/Tagout Devices.
5.) Control all stored...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
1 - 70 Section 1-9 - Electromagnetic Compatibility (EMC)
Section 1-9
Electromagnetic Compatibility (EMC)
1-9-1 What is EMC?
Electromagnetic compatibilit y describes a level of performance of  a device within its electromagnetic 
environment. This environment consists of the de vice itself and its surroundings including other 
equipment, power sources and pers ons with which the device must interface. Inadequate compatibility...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 1 - Introduction 1 - 71
Section 1-10
Customer Assistance
1-10-1 Contact Information
If this equipment does not work as  indicated in this service manual or in the user manual, or if you 
require additional assistance, please contact the lo cal distributor or appropriate support resource, as 
listed below.
Before you call, identify the follo wing information, and acquire image  (Alt+D) to send to the Customer 
Care team:
1.)...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
1 - 72 Section 1-10 - Customer Assistance
1-10-2 System Manufacturer
Table 1-25    System Manufacturer
MANUFACTURERPHONE NUMBERFAX NUMBER
GE Vingmed Ultrasound A/S
Strandpromenaden 45
P.O. Box 141
N-3191 HORTEN
NORWAY +47 3302 1100 +47 3302 1350