GE S5 Owners Manual

S/5 Extension Module for FM, N-FC, N-FCREC, N-FREC
31
Document no. M1187338-003
5 Earlier revisions
There are no earlier revisions of the S/5TM Extension Module for FM , N-FC, N-FCREC, N-FREC. 

Datex-Ohmeda S/5 FM
32
Document no. M1187338-003
For your notes: 

Appendix A Service check form, S/5 Extension Module for FM, N-FC, N-FCREC, N-FREC
1(2)
                           Document no. M1187338-003
APPENDIX A: Service check form, 
S/5 Extension Module for FM, N-FC, N-FCREC, 
N-FREC
OK = Test OK            N.A. = Test not applicable            Fail = Test failed
Customer
Service Module type S/N
Service engineer Date
Measuring equipment / test gases used:
Equipment / tool / gas:  Manufacturer: Model/Type/Part 
Number:Serial Number / 
ID:Calibration 
Date:
General...

Datex-Ohmeda S/5 FM
2(2)
Document no. M1187338-003
11. Check the flow rates  
Sampling flow  135...165 ml/min
12. Working pressure  
 
Amb-Work 20...50 mmHg
13. Gas calibration                            
14. Occlusion detection                             15. Check D-fend
                           
16. Apnea detection                                 
Recorder  
   OK           N.A.          Fail      OK           N.A.          Fail
17. Paper compartment 
cleaning                             18. Cover...

Datex-Ohmeda
Remote Controller
S/5™ Remote Controller, K-REMCO (Rev. 01)
S/5™ Remote Controller, K-CREMCO (Rev. 00)
Technical Reference Manual Slot
Conformity according to the Council Directive 93/42/EEC concerning Medical Devices amended by 2007/47/EC 
CAUTION: U.S. Federal law restricts this device to sale by or on the order of a li censed medical practitioner.
Outside the USA, check local laws  for any restriction that may apply.
All specifications subject to change without notice.
Document number...

Table of contentsi
Document no. M1187342-004
Table of contents
Introduction 1
1 Specif ications 2
1.1 Remote Controller, K-REMCO, K-CREMCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . .  2
2 Functional description3
2.1 Remote Controller, K-REMCO/ K-CREMCO  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . .  3
2.1.1 K-REMCO/ K-CREMCO PCBs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Datex-Ohmeda E-Modules
ii
Document no. M1187342-004 

Remote Controller1
Document no. M1187342-004
Introduction
This Technical Reference Manual slot provides  information for the maintenance and service of 
the Datex-Ohmeda S/5 Remote Controllers, K-REMCO and K-CREMCO. The Remote Controllers 
are designed for use with the Datex-Ohmeda modular monitors. Later in this manual the 
remote controllers may be referred to without S/5 for simplicity.
The service menu is described in a separate “Service Menu“ slot and the spare part lists in the 
“Spare Parts” slot...

Datex-Ohmeda E-Modules
2
Document no. M1187342-004
1Specifications
1.1 Remote Controller, K-REMCO, K-CREMCO
Dimensions (without cable)150 × 60  × 50 mm
Weight (incl. cable) 0.5 kg
Cable length 6 m
Input voltage 5 V
Power consumption 180 mW 
Communication protocol RS-232 
NOTE: Power supply from the monitor only.