GE Logiq P5 User Manual

Vascular Worksheet
LOGIQ 5 Basic User Manual 11-41
Direction 2300002-100 Rev. 2
Examiner’s Comments
To type a comment on a worksheet:
1. Select Examiner’s Comments.
The Examiner’s Comments window opens.
2.  Type comments about the exam.
3.  To close the Examiner’s Comments window, select 
Examiner’s Comments.
 Figure 11-19. Examiner’s comment field 

Vascular
11-42 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Intravessel ratio
To calculate Intravessel ratio, you need a measurement of 
accessing pressure and stenotic velocities.
1. Select Intravessel to display the pop-up window in the 
header section of the worksheet.
 Figure 11-20. Intravessel Pop-up Window
2.  Select the first velocity. 
The value is displayed in the window.
 Figure 11-21. Intravessel ratio one 

Vascular Worksheet
LOGIQ 5 Basic User Manual 11-43
Direction 2300002-100 Rev. 2
Intravessel ratio (continued)
3.  Select the second velocity.
The second value and Result value are displayed in the 
window.
 Figure 11-22. Intravessel ratio two
•  To save the Intravessel ratio to the Vessel Summary, move 
the cursor to Save and press Set.
•  To clear values, move the cursor to Clear and press Set.
•  To cancel and exit Intravessel ratio, move the cursor to 
Cancel and press Set.
NOTE:  Intravessel Ratio is...

Vascular
11-44 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Vessel Summary
The Vessel Summary is designed to automatically display 
measurements made at specific anatomical sites. Calculated 
ratios are automatically summarized and displayed.
The Vessel Summary can be displayed at any time during the 
exam by selecting Vessel Summary from the Vascular 
Worksheet Touch Panel.
 Figure 11-23. Vessel Summary Example 

Vascular Worksheet
LOGIQ 5 Basic User Manual 11-45
Direction 2300002-100 Rev. 2
Vessel Summary (continued)
1.  The first row, indicating Right or Left, is not displayed when 
the side is not defined in the vessel.  In the third column on 
the second line, you select the calculations.  Move the 
cursor to the third column, and the pop-up menu is 
displayed as in Figure 11-24. The selected parameter is 
displayed in every third column.
 Figure 11-24. Pop-up menu
2.  Vessel Name with location information....

Vascular
11-46 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Carotid Study
In the configuration page for ICA/CCA ratio, you can specify 
which portion of the CCA vessel (Prox, mid, distal) is chosen. 
You can override the selections on the Vessel summary.
The ICA/CCA ratio is able to be configured for either systole or 
diastole.
The vertebral vessel also has systole and diastole selections. In 
the summary page, there is a box to select flow reversal for 
vertebral flows. The choices are Ante...

LOGIQ 5 Basic User Manual 12-1
Direction 2300002-100 Rev. 2
Chapter 12
Urology
Describes how to perform Urology measurements and 
calculations. 

Urology
12-2 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2 

LOGIQ 5 Basic User Manual 13-1
Direction 2300002-100 Rev. 2
Chapter 13
Pediatrics
Describes how to perform Pediatrics measurements 
and calculations. 

Pediatrics
13-2 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Pediatrics Exam Preparation
Introduction
Measurements and calculations derived from ultrasound images 
are intended to supplement other clinical procedures available 
to the attending physician. The accuracy of measurements is not 
only determined by the system accuracy, but also by use of 
proper medical protocols by the user. When appropriate, be sure 
to note any protocols associated with a particular measurement 
or calculation....