GE Logiq P5 User Manual

LOGIQ 5 Basic User Manual 15-1
Direction 2300002-100 Rev. 2
Chapter 15
Recording Images
Describes how to record images.  

Recording Images
15-2 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Connectivity
Overview
A typical workflow for connectivity might be as follows (this setup 
varies by each user setup): 
•  Select the dataflow, worklist for example. 
•  Start a new exam. Select the patient. 
•  Perform the patient scan.
•  Store images as multi-frame CINE Loops and Raw DICOM 
data via the P1 button. 
•  Store secondary capture for DICOM print via P2. 
•  Store images to the color printer via P3. 
•  Store...

Connectivity
LOGIQ 5 Basic User Manual 15-3
Direction 2300002-100 Rev. 2
Overview (continued)
Dataflow combines archive, data, DICOM, and onboard records 
into one coherent workflow. Destination devices are configured 
and assigned to P1-P4 print buttons. You select the appropriate 
dataflow (Portable, etc.) according to your requirements. You 
manage the patient database (local, shared, or via a worklist 
broker). 
•  DO NOT use the internal hard drive for long-term image 
storage. Daily backup is...

Recording Images
15-4 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Adding Devices
To add a destination device (printer, worklist server, etc.) to this 
system, see Chapter 16. 
To verify a DICOM device, see Chapter 16.
Adding a Dataflow
To add a new dataflow to this system, see Chapter 16.
Adding Devices to a Print Button
To add devices/dataflows to a print button (P1 through P4), see 
Chapter 16.
Formatting Removable Media
To format removable media, see Chapter 16.
Using the DICOM Spooler
To...

Connectivity
LOGIQ 5 Basic User Manual 15-5
Direction 2300002-100 Rev. 2
Portable Exams Using the DICOM Worklist Broker
Here are the steps to follow when doing a portable exam: 
1.  Set up a dataflow called ‘Portable Exam’. The DICOM 
Worklist must be set up as the primary input device. DICOM 
Image Store must be set up as the primary output. 
 Figure 15-1. Portable Exam with Worklist Dataflow Setup Example 

Recording Images
15-6 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Portable Exams Using the DICOM Worklist Broker (continued)
2.  Define a print key for DICOM print. 
 Figure 15-2. DICOM Print Setup Example 

Connectivity
LOGIQ 5 Basic User Manual 15-7
Direction 2300002-100 Rev. 2
Portable Exams Using the DICOM Worklist Broker (continued)
3. Login. 
 Figure 15-3. Login Pop-up Menu
4.  On the Patient menu, select Portable with Worklist as this 
exam’s Dataflow. 
 Figure 15-4. Selecting the Portable Exam Dataflow on the New Patient Menu 

Recording Images
15-8 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Portable Exams Using the DICOM Worklist Broker (continued)
5.  Select the portable exam patient. 
 Figure 15-5. Selecting the Portable Exam Patient on the New Patient Menu
6.  Select the appropriate choice in the Warning message. 
 Figure 15-6. New Patient Query 

Connectivity
LOGIQ 5 Basic User Manual 15-9
Direction 2300002-100 Rev. 2
Portable Exams Using the DICOM Worklist Broker (continued)
7.  Press On/Off. Answer ‘Shutdown’ to the System - Exit pop-
up message. 
 Figure 15-7. System Power Down Menu
8.  Transport the system according to user manual instructions 
to the portable exam site.  

Recording Images
15-10 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Portable Exams Using the DICOM Worklist Broker (continued)
9.  Press Standby (On/Off) to power on the system. The 
patient’s exam is displayed on the screen. 
 Figure 15-8. Patient’s Exam
10.  Answer ‘Cont./End Exam’ to the Question pop-up message. 
 Figure 15-9. Continue Current Exam Question Pop-up Menu