GE Logiq 9 User Manual

Measurement and Analysis
LOGIQ E9 User Guide 2-27
Direction 5180302-100 Rev. 1
Velocity, Time Interval and Acceleration
To measure two velocity values, the time interval (ms), and 
acceleration (m/s2):
1. Press Measure three times; an active caliper with vertical 
and horizontal dotted lines displays.
2.  To position the caliper at the start point, move the Trackball.
3.  To fix the start point, press Set. The system fixes the first 
caliper and displays a second active caliper.
4.  To position the...

Performing an Exam
2-28 LOGIQ E9 User Guide
Direction 5180302-100 Rev. 1
M-Mode Measurements
Basic measurements that can be taken in the M-Mode portion of 
the display are:
• Tissue Depth (Distance)
• Time Interval
•  Time Interval and Velocity
NOTE:  The following instructions assume that you do the following:
1.  In the B-Mode part of the display, scan the anatomy you 
want to measure.
2.  Go to the M-Mode part of the display.
3. Press Freeze.
Tissue depth
Tissue depth measurement in M-Mode functions...

Measurement and Analysis
LOGIQ E9 User Guide 2-29
Direction 5180302-100 Rev. 1
Time interval
To measure a horizontal time interval and velocity: 
1. Press Measure twice; an active caliper with a vertical dotted 
line displays.
2.  To position the caliper at the start point, move the Trackball.
3.  To fix the first caliper, press Set. The system fixes the first 
caliper and displays a second active caliper.
4.  To position the second caliper at the end point, move the 
Trackball.
5.  To complete the...

Performing an Exam
2-30 LOGIQ E9 User Guide
Direction 5180302-100 Rev. 1
Viewing and Editing Worksheets
NOTE:  Worksheets are not saved if the system crashes.
As you complete measurements, the system puts measurement 
data in the appropriate worksheets. 
To view a worksheet
To view a worksheet, select Worksheet on the Touch Panel.
The system displays the worksheet for the current study. 
 Figure 2-7. OB B-Mode Worksheet
To return to scanning, do one of the following:
• Select Worksheet. 
• Press Esc.
•...

Measurement and Analysis
LOGIQ E9 User Guide 2-31
Direction 5180302-100 Rev. 1
To view a worksheet (continued)
To view a different worksheet, select the worksheet key for the 
desired worksheet. 
Figure 2-8. Worksheet Display Touch Panel
To view worksheet data for a particular mode, select the key for 
that mode. To view a worksheet with data for more than one 
mode, select Expand. When Expand is selected, it defaults to 
view all measurements, noted by mode, on the worksheet.
If a worksheet has more...

Performing an Exam
2-32 LOGIQ E9 User Guide
Direction 5180302-100 Rev. 1
To edit a worksheet
To change data on a worksheet:
1.  To position the cursor at the field you want to change, move 
the Trackball. The field is highlighted.
2. Press Set.
3.  Type the new data in the field. The new data is displayed in 
blue to indicate that it was manually entered.
To delete or exclude data on a worksheet:
1.  To position the cursor at the field you want to delete or 
exclude, move the Trackball. The field is...

Measurement and Analysis
LOGIQ E9 User Guide 2-33
Direction 5180302-100 Rev. 1
To edit a worksheet (continued)
To turn the volume measurement value off:
•  Select the method type Off. The value field becomes blank.
Figure 2-9. Volume Parameter Off
HINTSSome fields on the worksheet are view only, and others you 
can change or select. To easily see which fields you can 
change or select, move the Trackball. As the cursor moves 
over a field that you can change or select, the field is 
highlighted. 

Performing an Exam
2-34 LOGIQ E9 User Guide
Direction 5180302-100 Rev. 1
Delete All Worksheet Values
You can delete all worksheet values on a worksheet.
1.  When the Worksheet is displayed on the monitor, press the 
Clear key; the following warning message appears:
Figure 2-10. Delete All Warning Message
2. Select OK to delete all.
Select Cancel to cancel the deletion. 

LOGIQ E9 User Guide 3-1
Direction 5180302-100 Rev. 1
Chapter 3
After the Exam is Over
Probe Overview, System Presets, DataBackup, 
Configuring Connectivity, Electronic Documentation and 
System Care and Maintenance 

After the Exam is Over
3-2 LOGIQ E9 User Guide
Direction 5180302-100 Rev. 1
Probe Overview
Probe Naming Conventions
Table 3-1:  Probe Naming Convention
Real Time 4DTy p eApplicationFrequencyConnector Type
“R” C=Convex
L=Linear
M=Matrix
S=SectorAB=Abdominal
IC=Intracavitary
NA=Neonatal
SP=Small Parts“1-5” D=DLP