GE F650 Manual

APPENDIX D:  D.1 FACTORY DEFAULT SETTINGS
GEK-113000-AFF650 DIGITAL BAY CONTROLLER d-5
DNP Analog Input Points point listAnalog Input Point 24 End of listN/A
DNP Analog Input Points point listAnalog Input Point 25 End of listN/A
DNP Analog Input Points point listAnalog Input Point 26 End of listN/A
DNP Analog Input Points point listAnalog Input Point 27 End of listN/A
DNP Analog Input Points point listAnalog Input Point 28 End of listN/A
DNP Analog Input Points point listAnalog Input Point 29 End of...

D-6F650 DIGITAL BAY CONTROLLER GEK-113000-AF
D.1 FACTORY DEFAULT SETTINGS APPENDIX D:  
Product Setup > Communication Settings > IEC 870-5-104 (CONT.)
Setting DescriptionNameDefault ValueStepRangeUser 
Value
3nd Octect of IP address of 104 master 1
IEC104 NET2 CLI1 
OCTET3 0
N/A [0 : 255]
4th Octect of IP address of 104 master 1IEC104 NET2 CLI1 
OCTET4 0
N/A [0 : 255]
1st Octect of IP address of 104 master 2IEC104 NET2 CLI2 
OCTET1 0
N/A [0 : 255]
2nd Octect of IP address of 104 master 2IEC104 NET2 CLI2...

APPENDIX D:  D.1 FACTORY DEFAULT SETTINGS
GEK-113000-AFF650 DIGITAL BAY CONTROLLER d-7
Product Setup > Communication Settings > sntp 
Setting DescriptionNameDefault ValueStepRangeUser 
Value
Function permission FunctionDISABLEDN/A[DISABLED – ENABLED]
Port usedUDP port1231[1 : 65535]
IP Address OCT 1 Server IP Oct 101[1 : 255]
IP Address OCT 2 Server IP Oct 201[1 : 255]
IP Address OCT 3 Server IP Oct 301[1 : 255]
IP Address OCT 4 Server IP Oct 401[1 : 255]
Product Setup > Communication Settings > procome...

D-8F650 DIGITAL BAY CONTROLLER GEK-113000-AF
D.1 FACTORY DEFAULT SETTINGS APPENDIX D:  
sets the IP mask associated with the routeStatic RT1 Mask Oct30 1[0 : 255]
sets the IP mask associated with the route Static RT1 Mask Oct40 1[0 : 255]
sets the gateway to reach the destination IP 
rou
 te Static RT1 GWY Oct1
0 1[0 : 255]
sets the gateway to reach the destination IP 
rou
 te Static RT1 GWY Oct2
0 1[0 : 255]
sets the gateway to reach the destination IP 
rou
 te Static RT1 GWY Oct3
0 1[0 : 255]
sets the...

APPENDIX D:  D.1 FACTORY DEFAULT SETTINGS
GEK-113000-AFF650 DIGITAL BAY CONTROLLER d-9
sets the IP mask associated with the route
Static RT4 Mask Oct40 1[0 : 255]
sets the gateway to reach the destination IP 
rou
 te Static RT4 GWY Oct1
0 1[0 : 255]
sets the gateway to reach the destination IP 
rou
 te Static RT4 GWY Oct2
0 1[0 : 255]
sets the gateway to reach the destination IP 
rou
 te Static RT4 GWY Oct3
0 1[0 : 255]
sets the gateway to reach the destination IP 
rou
 te Static RT4 GWY Oct4
0 1[0 :...

D-10F650 DIGITAL BAY CONTROLLER GEK-113000-AF
D.1 FACTORY DEFAULT SETTINGS APPENDIX D:  
SETPOINT > PRODUCT SETUP > FAULT REPORT
Setting DescriptionNameDefault ValueStepRangeUser 
Value
Function permission FunctionDISABLEDN/A[DISABLED – ENABLED]
Positive sequence impedance module Pos Seq Module3.000.01 
Ohm[0.01 : 250.00]
Positive sequence impedance angle Pos Seq Angle751 
Deg[25 : 90]
Zero sequence impedance module Zero Seq Module9.000.01 
Ohm[0.01 : 750.00]
Zero sequence impedance angle Zero Seq...

APPENDIX D:  D.1 FACTORY DEFAULT SETTINGS
GEK-113000-AFF650 DIGITAL BAY CONTROLLER d-11
Setpoint > Product Setup > time settings
Setting DescriptionNameDefault ValueStepRangeUser 
Value
Local time zone offset Universal Coodinated TimeLOC. TIME OFFS. UTC0 1[-24,0 : 24,0] 
To follow DST rules
DAYLIG. SAVINGS 
TIMEDISABLED NA [DISBLED; ENABLED] 
Set the start month of the DSTDST START MONTHMAR
 
MONT
H January to December 
Set the start weekday of the DSTDST START WEEKDAYSUNDAY
 
DAY Monday to Sunday 
Set...

D-12F650 DIGITAL BAY CONTROLLER GEK-113000-AF
D.1 FACTORY DEFAULT SETTINGS APPENDIX D:  
Values for reset points 0.05 pkpT ime 0.05xPKP [RST]0.0000.00
1 s[0.000 : 65.535]
… ……0.00
1 s[0.000 : 65.535]
Values for reset points 0.97 pkp T ime 0.97xPKP [RST]0.0000.00
1 s[0.000 : 65.535]
Values for reset points 0.98 pkp T ime 0.98xPKP [RST]0.0000.00
1 s[0.000 : 65.535]
Values for operation points 1.03 pkp T ime 1.03xPKP [OP]0.0000.00
1 s[0.000 : 65.535]
Values for operation points 1.05 pkp T ime 1.05xPKP...

APPENDIX D:  D.1 FACTORY DEFAULT SETTINGS
GEK-113000-AFF650 DIGITAL BAY CONTROLLER d-13
Snapshot Event generation for switchgear 
#5Snapshot Events 
SW
GR 5 DISABLED
N/A[DISABLED – ENABLED]
Snapshot Event generation for switchgear 
#6 Snapshot Events 
SW

GR 6 DISABLED
N/A[DISABLED – ENABLED]
Snapshot Event generation for switchgear 
#7 Snapshot Events 
SW

GR 7 DISABLED
N/A[DISABLED – ENABLED]
Snapshot Event generation for switchgear 
#8 Snapshot Events 
SW

GR 8 DISABLED
N/A[DISABLED – ENABLED]...

D-14F650 DIGITAL BAY CONTROLLER GEK-113000-AF
D.1 FACTORY DEFAULT SETTINGS APPENDIX D:  
Input typeInputPHASOR(DFT)N/A[PHASOR – RMS]
Pickup level Pickup Level30.000.01 
A[0.05 : 160.00]
Trip time Trip Delay0.000.01 
s[0.00 : 900.00]
Reset time Reset Delay0.000.01 
s
[0.00 : 900.00]
Snapshot event generation Snapshot EventsENABLEDN/A[DISABLED – ENABLED]
Setpoint > Protection Elements >  Phase Current > Phase Directional >
Phase Directional 1> Phase Directional 2 > Phase Directional 3
Setting...