Fujifilm Camera X100t Owners Manual

Use the shooting menus to adjust shooting settings. The options available vary with the
shooting mode selected.
Press  [MENU/OK]  to display the shooting menu.
1. 
Press the selector up or down to highlight the desired menu item.2. 
Press the selector right to displa y options for the highlighted item.3. 
Press the selector up or down to highlight the desired option.4. 
Press [MENU/OK]  to select the highlighted option.5. 
Press [DISP/BACK] to exit from the menu.6. 
Using the Shooting Menu
002D0020...

See Also
[AUTOFOCUS SETTING]
[ISO]
[IMAGE SIZE]
[IMAGE QUALITY]
[DYNAMIC RANGE]
[FILM SIMULATION]
[FILM SIMULATION BKT]
[ND FILTER]
[COLOR]
[SHARPNESS]
[HIGHLIGHT TONE]
[SHADOW TONE]
[NOISE REDUCTION]
[LONG EXPOSURE NR]
[WHITE BALANCE]
[SELECT CUSTOM SETTING]
[EDIT/SAVE CUSTOM SETTING]
[FUNCTION (Fn) SETTING]
[DISP. CUSTOM SETTING]
[CONVERSION LENS]
[MF ASSIST]
[ADVANCED FILTER]
[INTERVAL TIMER SHOOTING]
[SELF-TIMER]
[AE/AF-LOCK MODE]
[AE/AF-LOCK BUTTON]
[PHOTOMETRY]
[INTERLOCK SPOT AE & FOCUS AREA]
[RED...

The factory default settings for the options in the shooting menus are listed below.
These settings can be restored using the [RESET] > [SHOOTING MENU RESET]
option in the setup menu.
[AUTOFOCUS SETTING]
 [MACRO] [OFF]
 [RELEASE/FOCUS PRIORITY]
    [AF-S PRIORITY SELECTION] [RELEASE]
    [AF-C PRIORITY SELECTION] [RELEASE]
 [INSTANT AF SETTING] [AF-S]
 [AF MODE] [AREA]
 [FACE DETECTION] [OFF]
 [PRE-AF] [OFF]
 [AF ILLUMINATOR] [ON]
  [CORRECTED AF FRAME] [OFF]
[ISO] [200]
[IMAGE SIZE]  [3:2]
[IMAGE...

[COLOR](0) [MID]
[SHARPNESS] (0) [STANDARD]
[HIGHLIGHT TONE] (0) [STANDARD]
[SHADOW TONE] (0) [STANDARD]
[NOISE REDUCTION] (0) [STANDARD]
[LONG EXPOSURE NR] [ON]
[WHITE BALANCE] [AUTO]
[FUNCTION (Fn) SETTING]
  Fn1
[MOVIE]
 Fn2 [MACRO]
 Fn3 [FILM SIMULATION]
 Fn4 [WHITE BALANCE]
 Fn5 [FOCUS AREA]
 Fn6 [PHOTOMETRY]
 Fn7 [WIRELESS COMMUNICATION]
Factory Defaults—Shooting Menu
002D0020 0031003400340020 002D  

[DISPLAY CUSTOM SETTING]
(OVF, EVF/LCD)[FRAMING GUIDELINE]
[ELECTRONIC LEVEL]
[AF DISTANCE INDICATOR]
[MF DISTANCE INDICATOR]
[HISTOGRAM]
[APERTURE/S-SPEED/ISO]
[EXP. COMPENSATION]
[PHOTOMETRY]
[FLASH]
[WHITE BALANCE]
[FILM SIMULATION]
[DYNAMIC RANGE]
[FRAMES REMAINING]
[IMAGE SIZE/QUALITY]
[MOVIE MODE & REC.
 TIME] (EVF/LCD)
[MOVIE MODE & RE C. TIME] (OVF)
[BATTERY LEVEL]
[CONVERSION LENS] [OFF]
[MF ASSIST] [STANDARD]
[ADVANCED FILTER] [OFF]
[SELF-TIMER] [OFF]
[AE/AF-LOCK MODE] [AE&AF ON WHEN PRESSING]...

[MOVIE SET-UP]
 [MOVIE MODE] [1920×1080] [60 fps]
 [MOVIE ISO] [AUTO]
  [MIC LEVEL ADJUSTMENT] [3]
 [MIC/REMOTE RELEASE] [MIC]
Factory Defaults—Shooting Menu
002D0020 0031003400360020 002D  

[RELEASE][FOCUS]
Adjust autofocus settings.
[FOCUS AREA]
[MACRO]
[RELEASE/FOCUS PRIORITY]
[INSTANT AF SETTING]
[AF MODE]
[FACE DETECTION]
[PRE-AF]
[AF ILLUMINATOR]
[CORRECTED AF FRAME]
Focus-area selection is available when  [AREA] is selected for [AF MODE] in focus mode  [S] or
[C] . In focus mode  [M], you can press the center of the  command dial to zoom in on the
selected focus area or focus on the subject in  the selected area at the touch of a button.
Select macro (close-up) mode.
Choose how the...

[AF-S]
[AF-C]
 [MULTI] [AREA]
Choose how the camera focuses when the  [AEL/AFL] button is used for autofocus in focus
mode  [M].
Focus is adjusted at the time the button is pressed.
Focus is adjusted continuously while the button is pressed.
Choose how the camera selects the focus area in focus modes  [S] and  [C].
When the shutter button is presse d halfway, the camera detects
high-contrast subjects near the ce nter of the frame and selects the
focus area automatically.
Choose the focus area manually....

If [ON] is selected, the camera will continue to adjust focus even when the shutter-release
button is not pressed halfway.
Note that this increases the drain on the battery.
If [ON]  is selected, the AF-assist illuminator will light to assist autofocus.
The AF-assist illuminator turns off automatically in silent mode.
The camera may be unable to focus using the  AF-assist illuminator in some cases. If the
camera is unable to focus in macro mode, tr y increasing the distance to the subject.
Avoid shining...

ON
OFF
If [ON]  is selected, a second focus frame for focus distances of about 50  cm (1.6 ft.) will be
added to the display in the optical viewfinder.  The focus frame for the current focus distance is
displayed in green when the shutter button is pressed halfway.
Focus frame for focus distance of infinity
Focus frame for focus distance of about 50  cm (1.6 ft.)
[AUTOFOCUS SETTING]
002D0020 0031003500300020 002D