Fujifilm Camera X100t Owners Manual

Use the selector to highlight items.
The [Q] button can not be used to adjust custom white balance, choose a color
temperature, or adjust settings for auto ISO sensitivity. These settings can be
adjusted using a function button or from the menus.
2. 
Rotate the command dial to change the highlighted item.3. 
Press  [Q] to exit when settings are complete.4. 
For quick access to custom settings banks, press and hold the  [Q] button while the
quick menu is displayed.
See Also
[EDIT/SAVE QUICK MENU]  (The...

The Function Buttons
[Fn] (Function) Buttons
002D0020 003900320020 002D  

Each of the function buttons can be assigned any one of the roles listed below. Options for the
selected item can then be displayed by pressing  the button. To choose the roles played by the
function buttons, press the [DISP/BACK] button until function settings options are displayed,
then highlight the desired butto n and press the selector right.
[ADVANCED FILTER]
[MULTIPLE EXPOSURE]
[MACRO]
[PREVIEW DEPTH OF FIELD]
[ISO]
[SELF-TIMER]
[IMAGE SIZE]
[IMAGE QUALITY]
[DYNAMIC RANGE]
[FILM SIMULATION]
[WHITE...

You can also use the [FUNCTION (Fn) SETTING]  option in the shooting menu to
choose the roles played by the function buttons.
You can also display options for any of the function buttons by pressing and holding the
button.
See Also
[FUNCTION (Fn) SETTING]  (The Shooting Menu)
The Function Buttons
002D0020 003900340020 002D  

Bracketing
Continuous Shooting (Burst Mode)
Multiple Exposures
Panoramas
Macro Mode (Close-ups)
Using the Self-Timer
Interval Timer Photography
Using the Flash
Focus-Frame Selection
Exposure Compensation
Focus/Exposure Lock
Focus Mode
Manual Focus (Focus Mode M)
Metering
Recording Pictures in RAW Format
Long Time-Exposures (T/B)
Film Simulation
White Balance
Advanced Filters
More on Photography
002D0020 003900350020 002D  

Automatically vary settings over a series of pictures. Bracketing options can be displayed by
pressing the  [DRIVE] button.
 [AE BKT]
 [ISO BKT]
 [FILM SIMULATION BKT]
 [WHITE BALANCE BKT]
 [DYNAMIC RANGE BKT]
Bracketing
002D0020 003900360020 002D  

Press the selector left or right to highlight a bracketing amount. Each time the shutter button is
pressed, the camera will take three shots:  one using the metered value for exposure, the
second overexposed by the selected amount, an d the third underexposed by the same amount.
The camera may not be able to use the selected bracketing increment if the amount of
over- or under- exposure exceeds the limits of the exposure metering system.
Press the selector left or right to highlight a  bracketing amount....

Press the selector left or right to highlight a bracketing amount. Each time the shutter button is
pressed, the camera takes three shots: one at the current wh ite balanced setting, one with
fine-tuning increased by the selected amount,  and another with fine-tuning decreased by the
selected amount.
This option can not be used if  [RAW] is selected for  [IMAGE QUALITY] .
Each time the shutter button is pressed, the  camera takes three shots at different dynamic
range settings: 100% for the first, 200%...

Capture motion in a series of pictures. Burst shooting options can be displayed by pressing the
[DRIVE] button.
Press the selector left or right to choose a frame rate. The camera takes photographs while the
shutter button is pressed.
Focus and Exposure
To vary focus and exposure with  each shot, select focus mode [C]; in other modes, focus
and exposure are determined by the first shot in each series.
Focus tracking performance varies with aperture, sensitivity, and shooting
conditions.
Continuous...

Create a photograph that combines two exposures.
Press the  [DRIVE] button to display drive options.
1. 
Highlight  [MULTIPLE EXPOSURE]  and press [MENU/OK]  to select the highlighted
option and return to shooting mode.2. 
Multiple Exposures
002D0020 0031003000300020 002D