Fujifilm Camera X100t Owners Manual

The flash may need more time to charge when the battery is low.
Red-Eye Removal
When “intelligent face detection” is active, and on is selected for “red eye removal”,
red-eye removal is available in  ,  ,  .
Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from
the subject’s retinas.
Using the Flash
002D0020 0031003100310020 002D  

Follow the steps below to choose the focus point used when [AREA] is selected for
[AUTOFOCUS SETTING]  > [AF MODE] in the shooting menu.
Press the selector down to view the focus area display.
At default settings, focus-area display  is assigned to the down button on the
selector (function button 5). For informatio n on choosing the roles assigned to the
function buttons, see “T he Function Buttons”.
The focus area can also be selected using the  [AUTOFOCUS SETTING] option in
the shooting menu.
1....

Focus frame
Focus point
Focus-Frame Selection
002D0020 0031003100330020 002D  

Use the selector to position the focus frame.
To select the center frame, press [DISP/BACK].
2. 
Focus-Frame Selection
002D0020 0031003100340020 002D  

Rotate the command dial to choose the size of the focus frame.
Rotate the dial left to reduce the frame by up to 50%, right to enlarge it by up to
150%, or press the center of the dial to restore the frame to its original size.
Press  [MENU/OK]  to select the chosen frame.
3. 
If [FOCUS AREA]  is selected for [SELECTOR BUTTON SETTING]  in the setup menu,
the selector can be used to position the  focus area without first pressing it down.
See Also
The Function Buttons ([Fn] (Function) Buttons)
[AUTOFOCUS...

Rotate the exposure compensation dial to adjust exposure when photographing very bright,
very dark, or high-contrast subjects.
Exposure compensation indicator (OVF)
Exposure compensation indicator (EVF/LCD)
Exposure Compensation
002D0020 0031003100360020 002D  

Choose positive values (+) to increase exposure
Choose negative values (−) to reduce exposure
When using the optical viewfinder, use th e exposure indicator to check exposure.
Exposure Compensation
002D0020 0031003100370020 002D  

The camera focuses and sets exposure for photographs when the shutter button is pressed
halfway and focus (AF) and exposure (AE) remain  locked while the shutter button is kept in this
position. Use focus and exposure lock to compose photographs with off-center subjects.
Position the subject in the focus frame.
1. 
Press the shutter button halfway to set focu s and exposure. The focus frame will turn
green.
This process can be repeated as often  as desired before the picture is taken.
2. 
Focus/Exposure...

Recompose the photograph. Do not change the distance to the subject while the shutter
button is pressed halfway.3. 
Press the shutter button the rest of the way down to take the picture.4. 
Focus/Exposure Lock
002D0020 0031003100390020 002D  

The [AEL/AFL] Button
Focus and/or exposure can also be locked using the [AEL/AFL] button.
Focus and/or exposure will remain locked  while the button is pressed, regardless of
whether or not the shutter button is pressed halfway.
The role played by the  [AEL/AFL] button can be selected using the
[AE/AF-LOCK BUTTON]  option in the shooting menu:
[AE LOCK ONLY] (the default setting):  The [AEL/AFL]  button locks
exposure only.
[AF LOCK ONLY]:  The [AEL/AFL]  button locks focus only.
[AE/AF LOCK]:  The...