Epson Stylus Pro 9400PS User Manual
Have a look at the manual Epson Stylus Pro 9400PS User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Printing with Windows51 1 1 1 1 1 1 1 1 1 1 1 1 English Note: This setting appears only when the Borderless check box is selected. Double Cut Select this setting to avoid the slight gap that occurs with the Single Cut setting. A margin is created between pictures, and 1 mm along the inside of each picture is cut. Note: This setting appears only when the Borderless check box is selected.
52Printing with Windows Normal Cut Select this setting to keep margins at the top and bottom of the printed data. Off Select this setting to cut printouts manually. To cut printouts manually, follow the steps below. Note: When you print on Canvas, only this setting is available. 1. Press the Paper Source l button to select Roll Auto Cut Off . 2. Press the Enter button. 3. The printer automatically feeds the paper to the cutter guide, and the printer becomes offline. Pause appears on the LCD. 4. If necessary, adjust the cutting position by using the Paper Feed d button or Paper Feed u button. 5. Cut the paper along the cutter guide using the manual cutter unit.
Printing with Windows53 1 1 1 1 1 1 1 1 1 1 1 1 English 6. After cutting the paper, press the Pause button. The printer becomes online. Making the Paper Size setting You can select a paper size that you want to use. Select the proper paper size from the Paper Size list. You can also add a custom paper size, using the steps below. 1. Select User Defined from the Paper Size list. The User Defined Paper Size dialog box appears. 2. Enter Paper Size Name, Paper Width and Paper Height, and then select Unit. Note: If you are using Windows Me or 98, the maximum paper height is 90.55 inches (230 cm). 3. Click OK to save the custom paper size.
54Printing with Windows Making the Copies setting You can specify the number of copies to print. Enter a number in the Copies box, or click the arrow next to the box. You can enter any number from 1 to 9999. When printing multiple copies of your document, select Collate to print one complete document set at a time. Select Reverse Order to print your documents in reverse order, starting with the last page.
Printing with Windows55 1 1 1 1 1 1 1 1 1 1 1 1 English Making the Orientation settings You can specify the direction of printing on the page. PortraitPrint direction is short edge first, like most magazines. LandscapePrint direction is long edge first, like many spreadsheets. Rotated by 180°Prints your document upside down. Note: This function is not available when Roll Paper (Banner) is selected as the Paper Source setting.
56Printing with Windows Making the Printable Area setting This setting is available when you select Sheet as the Paper Source setting. You can make the following setting. Centered Select this setting to center printouts.
Printing with Windows57 1 1 1 1 1 1 1 1 1 1 1 1 English Making the Roll Paper Option settings This setting is available when you select Roll Paper or Roll Paper (Banner) as the Paper Source setting. You can make the following settings. Auto Rotate Note: This function is available only when Roll Paper is selected as the Paper Source setting.
58Printing with Windows This function is effective only when the print data length is shorter than the printable width of the roll paper. The print data will automatically be turned 90 degrees to print crosswise, saving roll paper. To enable this function, follow the steps below. 1. Select Auto Rotate. The Roll Width button is activated. 2. Click Roll Width. The Roll Paper Width dialog box appears. 3. Select the installed roll paper size from the pull-down menu. 4. Click OK. Print Page Line This function lets you specify whether to print a page line on the right side, and also below the document for manual cutting. To enable this function, select Print Page Line. Original Auto Rotate onAuto Rotate off
Printing with Windows59 1 1 1 1 1 1 1 1 1 1 1 1 English The Print Page Line operation changes according to the Auto Cut setting. Check these settings as necessary by referring to the printer’s operation. Save Roll Paper Note: This function is available only when Roll Paper (Banner) is selected as the Paper Source setting. This function is effective if you wish to save roll paper, because the blank portion of the last page of your printed data is not fed through the printer. To enable this function, select Save Roll Paper. Making Settings on the Layout Menu You can make the Reduce/Enlarge, Multi-Page, and Optimize Enlargement settings on this menu. Auto Cut Print Page Line Printer’s Operation Single Cut Double Cut Normal CutSelected Prints page line on the right side only, and cuts paper automatically after the print job. Single Cut Double Cut Normal CutNot selected Does not print page line, but cuts paper automatically after the print job. Off Selected Prints page lines on the right side and below the document, but does not cut paper automatically after the print job. Off Not selected Does not print page lines or cut paper.
60Printing with Windows Note: ❏The functions on the Layout menu are not available when Roll Paper (Banner) is selected as the Paper Source setting. ❏According to the paper source you choose, some of the functions are not available.