Epson Stylus Pro 9400PS User Manual
Have a look at the manual Epson Stylus Pro 9400PS User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
The Control Panel201 4 4 4 4 4 4 4 4 4 4 4 4 English Combination of buttons This section describes the functions available when several buttons are pressed at the same time. 3Paper check light (red)On: No paper is loaded in the manual feed when Sheet is selected as the paper source. Roll paper is out when Roll Auto Cut On or Roll Auto Cut Off is selected as the paper source. The selected paper source (Roll Auto Cut On /Roll Auto Cut Off /Sheet ) does not match the paper source in the printer driver. The paper lever is in the released position. The loaded paper is too thick for head cleaning. Flashing: Paper is jammed. Paper is almost out. Paper is not cut correctly after the print job when Roll Auto Cut On is selected as the paper source. Paper is not loaded straight. Paper is not detected. Cut sheet is not ejected correctly. 4 Ink check light (red)On: The installed ink cartridge is empty. The installed ink cartridges cannot be used with this printer. The maintenance tank is full. Flashing: The installed ink cartridge is nearly empty. The maintenance tank is nearly full. Buttons Function 1. Power button 2. Pause button If the printer is turned on while you are pressing and holding the Pause button, the printer enters the Maintenance Mode.
202The Control Panel Messages This section describes the meaning of messages displayed on the LCD. Messages are either status messages or error messages. For error messages, see “An error has occurred” on page 319. 1. Pause button 2. Paper Source button lBy pressing the Pause button and Paper Source l button, you can switch the Roll Paper Counter setting on and off. Note: To use this combination of buttons, REMAINING PPR SETUP in the Maintenance mode and ROLL PAPER COUNTER in the Menu mode should be on. Message Description READY The printer is ready to print data. PRINTING The printer is processing data. INK DRYING The printer is drying ink. PAUSE The printer is paused. Displays EPSON logo and progress barThe printer is preparing to print. CUTTING PAPER PLEASE WAITThe printer is cutting the paper. PLEASE WAIT Wait until READY appears. CLEANING PLEASE WAITThe printer is cleaning the ink tubes. PRESS PAUSE BUTTON Press the Pause button. CHARGING INK The printer is charging the ink delivery system. RESETTING PLEASE WAITThe printer is resetting. Wait a while.
The Control Panel203 4 4 4 4 4 4 4 4 4 4 4 4 English Icons This section describes the meaning of icons displayed on the LCD. Paper source icon Platen Gap icon UPDATING FIRMWARE The printer is updating the FirmWare. FIRMWARE UPDATE COMPLETEThe printer has completed update of the FirmWare. POWER OFF PLEASE WAITThe printer is turning off. Icons Description Roll Auto Cut On Roll Auto Cut Off Sheet Icons Description Widest Wider Wide Narrow
204The Control Panel Roll Paper Margin icon Displays the paper margin when the roll paper is selected. Roll Paper Counter icon Displays when REMAINING PPR SETUP in the Maintenance mode and ROLL PAPER COUNTER in the Menu mode is on. Remaining ink icon Displays the amount of ink remaining. Icons Description Displays the top and bottom roll paper margins. This icon does not appear when Default is selected. 15mm: Top and bottom margins are15 mm, and right and left margins are 3 mm. 35/15mm: Top margin is 35 mm, bottom margin is 15 mm, and right and left margins are 3 mm. 3mm: Margins of all sides are 3 mm. 15mm: Margins of all sides are 15 mm. Icons Description ROLL PAPER COUNTER is on. Icons Description 100 - 81% 80 - 61% 60 - 41% 40 - 21% 20% to nearly full
The Control Panel205 4 4 4 4 4 4 4 4 4 4 4 4 English Remaining maintenance tank icon Displays the free capacity of the maintenance tank. Displays one maintenance icon for EPSON Stylus Pro 7800/7400 and two maintenance icon for EPSON Stylus Pro 9800/9400. Paper suction icon Ink low Ink end Cartridge error or no cartridge Icons Description 100 - 81% 80 - 61% 60 - 41% 40 - 21% 20% to nearly full Maintenance tank nearly full Maintenance tank full Maintenance tank error or no Maintenance tank Icons Description Large (168%) Normal (60%) Small (0%)
206The Control Panel Menu Settings When to use Menu mode The Menu mode enables you to make printer settings similar to those you would normally make in the driver or software, as well as other additional settings — directly from the control panel. Note: ❏Some applications may send commands to the printer that override the Menu settings. If you are not getting the results you expect, check your application’s settings. ❏To see the current Menu settings, print a status sheet.
The Control Panel207 4 4 4 4 4 4 4 4 4 4 4 4 English Menu list Menu Item Parameter “PRINTER SETUP” on page 213“ROLL PAPER COUNTER” on page 213ROLL PAPER LENGTH ROLL LENGTH ALERT “PLATEN GAP” on page 213NARROW, STANDARD, WIDE, WIDER, WIDEST “PAGE LINE” on page 213ON, OFF “INTERFACE” on page 214AUTO, USB, IEEE1394, OPTIONAL I/F CARD “CODE PAGE” on page 214PC437, PC850 “ROLL PAPER MARGIN” on page 215DEFAULT, TOP/BOTTOM 15 mm, TOP35/BOTTOM15mm, 3mm, 15 mm, “PAPER SIZE CHECK” on page 216ON, OFF “PAPER SKEW CHECK” on page 216ON, OFF “TIME OUT” on page 216OFF, 30sec, 60sec, 180sec, 300sec “CUTTER ADJUSTMENT” on page 217EXECUTE “REFRESH MARGIN” on page 217ON, OFF “AUTO NOZZLE CHECK” on page 217OFF, ON “AUTO CLEANING” on page 217ON, OFF “QUIET CUT” on page 217OFF, ON “INITIALIZE SETTINGS” on page 218EXECUTE
208The Control Panel “TEST PRINT” on page 218“NOZZLE CHECK” on page 218PRINT “STATUS SHEET” on page 218PRINT “JOB INFORMATION” on page 218PRINT “CUSTOM PAPER” on page 218PRINT “PRINTER STATUS” on page 218“VERSION” on page 219SN0xxxx. ICBS SW0xxxx. ICBS “PRINTABLE PAGES” on page 219 (EPSON Stylus Pro 9800/7800)LIGHT LIGHT BLACK xxxxxx PAGES LIGHT MAGENTA xxxxxx PAGES LIGHT CYAN xxxxxx PAGES LIGHT BLACK xxxxxx PAGES MATTE BLACK/PHOTO BLACK xxxxxx PAGES CYAN xxxxxx PAGES MAGENTA xxxxxx PAGES YELLOW xxxxxx PAGES “PRINTABLE PAGES” on page 219 (EPSON Stylus Pro 9400/7400)MATTE BLACK xxxxxx PAGES MATTE BLACK 2 xxxxxx PAGES MAGENTA xxxxxx PAGES MAGENTA 2 xxxxxx PAGES CYAN xxxxxx PAGES CYAN 2 xxxxxx PAGES YELLOW xxxxxx PAGES YELLOW 2 xxxxxx PAGES
The Control Panel209 4 4 4 4 4 4 4 4 4 4 4 4 English “INK LEVEL” on page 219 (EPSON Stylus Pro 9800/7800)LIGHT LIGHT BLACK E*****F, E****F, E***F, E**F, E*F, nn%, 0% LIGHT MAGENTA E*****F, E****F, E***F, E**F, E*F, nn%, 0% LIGHT CYAN E*****F, E****F, E***F, E**F, E*F, nn%, 0% LIGHT BLACK E*****F, E****F, E***F, E**F, E*F, nn%, 0% MATTE BLACK/PHOTO BLACK E*****F, E****F, E***F, E**F, E*F, nn%, 0% CYAN E*****F, E****F, E***F, E**F, E*F, nn%, 0% MAGENTA E*****F, E****F, E***F, E**F, E*F, nn%, 0% YELLOW E*****F, E****F, E***F, E**F, E*F, nn%, 0% “INK LEVEL” on page 219 (EPSON Stylus Pro 9400/7400)MATTE BLACK E*****F, E****F, E***F, E**F, E*F, nn%, 0% MATTE BLACK 2 E*****F, E****F, E***F, E**F, E*F, nn%, 0% MAGENTA E*****F, E****F, E***F, E**F, E*F, nn%, 0% MAGENTA 2 E*****F, E****F, E***F, E**F, E*F, nn%, 0% CYAN E*****F, E****F, E***F, E**F, E*F, nn%, 0% CYAN 2 E*****F, E****F, E***F, E**F, E*F, nn%, 0% YELLOW E*****F, E****F, E***F, E**F, E*F, nn%, 0% YELLOW 2 E*****F, E****F, E***F, E**F, E*F, nn%, 0% “MAINTENANCE TANK” on page 219E*****F, E****F, E***F, E**F, E*F, nn%, 0%
210The Control Panel “USAGE COUNT” on page 220INK xxxxx.xml PAPER xxxxx.xcm “CLEAR USAGE COUNT” on page 220INK EXECUTE PAPER EXECUTE “JOB HISTORY” on page 220No. 0-No. 9 “CLEAR JOB HISTORY” on page 220EXECUTE “TOTAL PRINTS” on page 220xxxxxx PAGES “SERVICE LIFE” on page 220CUTTER E*****F, E****F, E***F, E**F, E*F, nn%, 0% CR MOTOR E*****F, E****F, E***F, E**F, E*F, nn%, 0% PF MOTOR E*****F, E****F, E***F, E**F, E*F, nn%, 0% PRESSURE MOTOR E*****F, E****F, E***F, E**F, E*F, nn%, 0% HEAD UNIT E*****F, E****F, E***F, E**F, E*F, nn%, 0% CLEANING UNIT E*****F, E****F, E***F, E**F, E*F, nn%, 0%