Epson Projector PT EZ590 User Manual
Here you can view all the pages of manual Epson Projector PT EZ590 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
ENGLISH - 61
Chapter 4 Settings
This chapter describes the settings and the adjustments you can make usi\
ng the on-screen menu.](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-60.png "Page 61
ENGLISH - 61
Chapter 4 Settings
This chapter describes the settings and the adjustments you can make usi\
ng the on-screen menu.")
ENGLISH - 61 Chapter 4 Settings This chapter describes the settings and the adjustments you can make usi\ ng the on-screen menu.
Page 62
Chapter 4 Settings — Menu navigation 62 - ENGLISH Menu navigation The on-screen menu (Menu) is used to perform various settings and adjustments of the projector . Navigating through the menu Operating procedure button 1) Press the button on the remote control or the control panel. f The main menu screen appears. 2) Press as to select an item from the main menu. f The selected item is highlighted in yellow. 3) Press the button. f The sub-menu items of the selected main menu are displayed. 4)...
Page 63
![Page 63
Chapter 4 Settings — Menu navigation
ENGLISH - 63
Note
f Pressing the button while the menu screen is displayed to return the previous menu.
You can operate in the same way by pressing
the button.
f Some items may not be adjusted or used for certain signal formats to be input to the projector
. The menu items that cannot be adjusted or
used are shown in gray characters, and they cannot be selected. [DIGIT AL CINEMA REALITY] and [FRAME LOCK] may not be displayed
depending on the input signal....](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-62.png "Page 63
Chapter 4 Settings — Menu navigation
ENGLISH - 63
Note
f Pressing the button while the menu screen is displayed to return the previous menu.
You can operate in the same way by pressing
the button.
f Some items may not be adjusted or used for certain signal formats to be input to the projector
. The menu items that cannot be adjusted or
used are shown in gray characters, and they cannot be selected. [DIGIT AL CINEMA REALITY] and [FRAME LOCK] may not be displayed
depending on the input signal....")
Chapter 4 Settings — Menu navigation ENGLISH - 63 Note f Pressing the button while the menu screen is displayed to return the previous menu. You can operate in the same way by pressing the button. f Some items may not be adjusted or used for certain signal formats to be input to the projector . The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected. [DIGIT AL CINEMA REALITY] and [FRAME LOCK] may not be displayed depending on the input signal....
Page 64
![Page 64
Chapter 4 Settings — Menu navigation
64 - ENGLISH
[PICTURE]
Sub-menu item
Factory default Page
[PICTURE MODE]
[STANDARD]66
[CONTRAST] [0]66
[BRIGHTNESS] [0]66
[COLOR]*
2[0] 67
[TINT]*
2[0] 67
[SHARPNESS] [+8]67
[COLOR TEMPERATURE] [DEFAULT]67
[GAMMA] [0]68
[IRIS]
*3[OFF]*168
[ADVANCED MENU] -68
[DAYLIGHT VIEW] [AUTO]
*1*469
[DIGITAL CINEMA REALITY]*
2[ON] 69
[NOISE REDUCTION]*
5[1] 69
[TV-SYSTEM]*
5[AUTO] 70
[RGB/YP
BPR]/[RGB/YCBCR]*6[AUTO] 70
*1 Depends on the [PICTURE MODE].
*2 Only for movie-based...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-63.png "Page 64
Chapter 4 Settings — Menu navigation
64 - ENGLISH
[PICTURE]
Sub-menu item
Factory default Page
[PICTURE MODE]
[STANDARD]66
[CONTRAST] [0]66
[BRIGHTNESS] [0]66
[COLOR]*
2[0] 67
[TINT]*
2[0] 67
[SHARPNESS] [+8]67
[COLOR TEMPERATURE] [DEFAULT]67
[GAMMA] [0]68
[IRIS]
*3[OFF]*168
[ADVANCED MENU] -68
[DAYLIGHT VIEW] [AUTO]
*1*469
[DIGITAL CINEMA REALITY]*
2[ON] 69
[NOISE REDUCTION]*
5[1] 69
[TV-SYSTEM]*
5[AUTO] 70
[RGB/YP
BPR]/[RGB/YCBCR]*6[AUTO] 70
*1 Depends on the [PICTURE MODE].
*2 Only for movie-based...")
Chapter 4 Settings — Menu navigation 64 - ENGLISH [PICTURE] Sub-menu item Factory default Page [PICTURE MODE] [STANDARD]66 [CONTRAST] [0]66 [BRIGHTNESS] [0]66 [COLOR]* 2[0] 67 [TINT]* 2[0] 67 [SHARPNESS] [+8]67 [COLOR TEMPERATURE] [DEFAULT]67 [GAMMA] [0]68 [IRIS] *3[OFF]*168 [ADVANCED MENU] -68 [DAYLIGHT VIEW] [AUTO] *1*469 [DIGITAL CINEMA REALITY]* 2[ON] 69 [NOISE REDUCTION]* 5[1] 69 [TV-SYSTEM]* 5[AUTO] 70 [RGB/YP BPR]/[RGB/YCBCR]*6[AUTO] 70 *1 Depends on the [PICTURE MODE]. *2 Only for movie-based...
Page 65
![Page 65
Chapter 4 Settings — Menu navigation
ENGLISH - 65
Sub-menu item
Factory default Page
[BACK COLOR] [BLUE]89
[WIDE MODE] [AUTO]89
[SXGA MODE] [AUTO]89
[P-TIMER] -89
[OTHER FUNCTIONS] -90
*1 Only for PT -EZ590, PT -EW650 and PT -EX620
[PROJECTOR SETUP]
Sub-menu item Factory default Page
[STATUS] -92
[PROJECTOR ID] [ALL]92
[INITIAL START UP] [LAST MEMORY]92
[PROJECTION METHOD] [AUTO]93
[LAMP POWER] [NORMAL]93
[ECO MANAGEMENT] -93
[RS-232C] -95
[REMOTE1 MODE] [DEFAULT]96
[FUNCTION BUTTON] -96
[AUDIO SETTING]...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-64.png "Page 65
Chapter 4 Settings — Menu navigation
ENGLISH - 65
Sub-menu item
Factory default Page
[BACK COLOR] [BLUE]89
[WIDE MODE] [AUTO]89
[SXGA MODE] [AUTO]89
[P-TIMER] -89
[OTHER FUNCTIONS] -90
*1 Only for PT -EZ590, PT -EW650 and PT -EX620
[PROJECTOR SETUP]
Sub-menu item Factory default Page
[STATUS] -92
[PROJECTOR ID] [ALL]92
[INITIAL START UP] [LAST MEMORY]92
[PROJECTION METHOD] [AUTO]93
[LAMP POWER] [NORMAL]93
[ECO MANAGEMENT] -93
[RS-232C] -95
[REMOTE1 MODE] [DEFAULT]96
[FUNCTION BUTTON] -96
[AUDIO SETTING]...")
Chapter 4 Settings — Menu navigation ENGLISH - 65 Sub-menu item Factory default Page [BACK COLOR] [BLUE]89 [WIDE MODE] [AUTO]89 [SXGA MODE] [AUTO]89 [P-TIMER] -89 [OTHER FUNCTIONS] -90 *1 Only for PT -EZ590, PT -EW650 and PT -EX620 [PROJECTOR SETUP] Sub-menu item Factory default Page [STATUS] -92 [PROJECTOR ID] [ALL]92 [INITIAL START UP] [LAST MEMORY]92 [PROJECTION METHOD] [AUTO]93 [LAMP POWER] [NORMAL]93 [ECO MANAGEMENT] -93 [RS-232C] -95 [REMOTE1 MODE] [DEFAULT]96 [FUNCTION BUTTON] -96 [AUDIO SETTING]...
Page 66
![Page 66
Chapter 4 Settings — [PICTURE] menu
66 - ENGLISH
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an i\
tem from the sub-menu.
Refer to “Navigating through the menu” (
x page 62) for the operation of the menu screen.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the
projector is used.
1)
Press as to select [PICTURE MODE].
2) Press qw or the button.
f The
[PICTURE MODE] individual adjustment...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-65.png "Page 66
Chapter 4 Settings — [PICTURE] menu
66 - ENGLISH
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an i\
tem from the sub-menu.
Refer to “Navigating through the menu” (
x page 62) for the operation of the menu screen.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the
projector is used.
1)
Press as to select [PICTURE MODE].
2) Press qw or the button.
f The
[PICTURE MODE] individual adjustment...")
Chapter 4 Settings — [PICTURE] menu 66 - ENGLISH [PICTURE] menu On the menu screen, select [PICTURE] from the main menu, and select an i\ tem from the sub-menu. Refer to “Navigating through the menu” ( x page 62) for the operation of the menu screen. [PICTURE MODE] You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used. 1) Press as to select [PICTURE MODE]. 2) Press qw or the button. f The [PICTURE MODE] individual adjustment...
Page 67
![Page 67
Chapter 4 Settings — [PICTURE] menu
ENGLISH - 67
Operation
AdjustmentRange of adjustment
Press the w button. Increases the brightness of the dark (black) parts of the screen.
-32 ~ +32Press the q button.Reduces the brightness of the dark (black) parts of the screen.
[COLOR]
(Only for movie-based signal input)
You can adjust the color saturation of the projected image.
1)
Press as to select [COLOR].
2) Press qw or the button.
f The
[COLOR] individual adjustment screen is displayed.
3) Press qw to...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-66.png "Page 67
Chapter 4 Settings — [PICTURE] menu
ENGLISH - 67
Operation
AdjustmentRange of adjustment
Press the w button. Increases the brightness of the dark (black) parts of the screen.
-32 ~ +32Press the q button.Reduces the brightness of the dark (black) parts of the screen.
[COLOR]
(Only for movie-based signal input)
You can adjust the color saturation of the projected image.
1)
Press as to select [COLOR].
2) Press qw or the button.
f The
[COLOR] individual adjustment screen is displayed.
3) Press qw to...")
Chapter 4 Settings — [PICTURE] menu ENGLISH - 67 Operation AdjustmentRange of adjustment Press the w button. Increases the brightness of the dark (black) parts of the screen. -32 ~ +32Press the q button.Reduces the brightness of the dark (black) parts of the screen. [COLOR] (Only for movie-based signal input) You can adjust the color saturation of the projected image. 1) Press as to select [COLOR]. 2) Press qw or the button. f The [COLOR] individual adjustment screen is displayed. 3) Press qw to...
Page 68
![Page 68
Chapter 4 Settings — [PICTURE] menu
68 - ENGLISH
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
Factory default setting.
[HIGH] Select so that images become natural.
[LOW]
[GAMMA]
You can adjust contrast balance.
1) Press as to select [GAMMA].
2) Press qw or the button.
f The
[GAMMA] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation AdjustmentRange of adjustment
Press the w button. The midtones become...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-67.png "Page 68
Chapter 4 Settings — [PICTURE] menu
68 - ENGLISH
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
Factory default setting.
[HIGH] Select so that images become natural.
[LOW]
[GAMMA]
You can adjust contrast balance.
1) Press as to select [GAMMA].
2) Press qw or the button.
f The
[GAMMA] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation AdjustmentRange of adjustment
Press the w button. The midtones become...")
Chapter 4 Settings — [PICTURE] menu 68 - ENGLISH 3) Press qw to switch the item. f The items will switch each time you press the button. [DEFAULT] Factory default setting. [HIGH] Select so that images become natural. [LOW] [GAMMA] You can adjust contrast balance. 1) Press as to select [GAMMA]. 2) Press qw or the button. f The [GAMMA] individual adjustment screen is displayed. 3) Press qw to adjust the level. Operation AdjustmentRange of adjustment Press the w button. The midtones become...
Page 69
![Page 69
Chapter 4 Settings — [PICTURE] menu
ENGLISH - 69
Items
Operation AdjustmentAdjustment range
[BRIGHTNESS G] Press the w button.
Emphasizes green in shadow areas.
-32 ~ +32
Press the q button. Deemphasizes green in shadow areas.
[BRIGHTNESS B] Press the w button.
Emphasizes blue in shadow areas.
-32 ~ +32
Press the q button. Deemphasizes blue in shadow areas.
[DAYLIGHT VIEW]
You can correct the image to the optimal vividness even if it is projected under a bright light.
1)
Press as to select [DAYLIGHT...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-68.png "Page 69
Chapter 4 Settings — [PICTURE] menu
ENGLISH - 69
Items
Operation AdjustmentAdjustment range
[BRIGHTNESS G] Press the w button.
Emphasizes green in shadow areas.
-32 ~ +32
Press the q button. Deemphasizes green in shadow areas.
[BRIGHTNESS B] Press the w button.
Emphasizes blue in shadow areas.
-32 ~ +32
Press the q button. Deemphasizes blue in shadow areas.
[DAYLIGHT VIEW]
You can correct the image to the optimal vividness even if it is projected under a bright light.
1)
Press as to select [DAYLIGHT...")
Chapter 4 Settings — [PICTURE] menu ENGLISH - 69 Items Operation AdjustmentAdjustment range [BRIGHTNESS G] Press the w button. Emphasizes green in shadow areas. -32 ~ +32 Press the q button. Deemphasizes green in shadow areas. [BRIGHTNESS B] Press the w button. Emphasizes blue in shadow areas. -32 ~ +32 Press the q button. Deemphasizes blue in shadow areas. [DAYLIGHT VIEW] You can correct the image to the optimal vividness even if it is projected under a bright light. 1) Press as to select [DAYLIGHT...
Page 70
![Page 70
Chapter 4 Settings — [PICTURE] menu
70 - ENGLISH
*1
When [RGB1 INPUT SETTING] is set to [Y/C] (Æ page 82)
Attention
f When this is set for an input signal with less noise, the image may look dif
ferent from what it originally was. In such a case, set it to [OFF].
[TV-SYSTEM]
(Only when the terminal or *1 terminal is selected)
The projector will automatically detect the input signal, but you can set the color system manually when an
unstable signal is input. Set the color system to match the input...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-69.png "Page 70
Chapter 4 Settings — [PICTURE] menu
70 - ENGLISH
*1
When [RGB1 INPUT SETTING] is set to [Y/C] (Æ page 82)
Attention
f When this is set for an input signal with less noise, the image may look dif
ferent from what it originally was. In such a case, set it to [OFF].
[TV-SYSTEM]
(Only when the terminal or *1 terminal is selected)
The projector will automatically detect the input signal, but you can set the color system manually when an
unstable signal is input. Set the color system to match the input...")
Chapter 4 Settings — [PICTURE] menu 70 - ENGLISH *1 When [RGB1 INPUT SETTING] is set to [Y/C] (Æ page 82) Attention f When this is set for an input signal with less noise, the image may look dif ferent from what it originally was. In such a case, set it to [OFF]. [TV-SYSTEM] (Only when the terminal or *1 terminal is selected) The projector will automatically detect the input signal, but you can set the color system manually when an unstable signal is input. Set the color system to match the input...