Epson Projector PT EZ590 User Manual
Here you can view all the pages of manual Epson Projector PT EZ590 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 101
f The
[SCHEDULE] screen is displayed.
3) Press as to select [PROGRAM EDIT].
4) Press qw to select a program number, and press the button.
5) Press as to select a command number, and press the button.
6) Press asqw to select [TIME], and press the button.
f The projector is in the adjustment mode (where the time is blinking).
7) Press qw to select “hour” or “minute”, and press as to set a time, and then press the
button.
8) Press...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-100.png "Page 101
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 101
f The
[SCHEDULE] screen is displayed.
3) Press as to select [PROGRAM EDIT].
4) Press qw to select a program number, and press the button.
5) Press as to select a command number, and press the button.
6) Press asqw to select [TIME], and press the button.
f The projector is in the adjustment mode (where the time is blinking).
7) Press qw to select “hour” or “minute”, and press as to set a time, and then press the
button.
8) Press...")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 101 f The [SCHEDULE] screen is displayed. 3) Press as to select [PROGRAM EDIT]. 4) Press qw to select a program number, and press the button. 5) Press as to select a command number, and press the button. 6) Press asqw to select [TIME], and press the button. f The projector is in the adjustment mode (where the time is blinking). 7) Press qw to select “hour” or “minute”, and press as to set a time, and then press the button. 8) Press...
Page 102
![Page 102
Chapter 4 Settings — [PROJECTOR SETUP] menu
102 - ENGLISH
f If an operation is executed with the remote control or the control panel of the projector or with a control command before the command set in
[SCHEDULE] is executed, the command set with the schedule function may not be executed.
[DATE AND TIME]
Set the time zone, date, and time of the built-in clock of the projector
.
Setting the time zone
1) Press as to select [DATE AND TIME].
2) Press the button.
f The
[DATE AND TIME] screen is...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-101.png "Page 102
Chapter 4 Settings — [PROJECTOR SETUP] menu
102 - ENGLISH
f If an operation is executed with the remote control or the control panel of the projector or with a control command before the command set in
[SCHEDULE] is executed, the command set with the schedule function may not be executed.
[DATE AND TIME]
Set the time zone, date, and time of the built-in clock of the projector
.
Setting the time zone
1) Press as to select [DATE AND TIME].
2) Press the button.
f The
[DATE AND TIME] screen is...")
Chapter 4 Settings — [PROJECTOR SETUP] menu 102 - ENGLISH f If an operation is executed with the remote control or the control panel of the projector or with a control command before the command set in [SCHEDULE] is executed, the command set with the schedule function may not be executed. [DATE AND TIME] Set the time zone, date, and time of the built-in clock of the projector . Setting the time zone 1) Press as to select [DATE AND TIME]. 2) Press the button. f The [DATE AND TIME] screen is...
Page 103
![Page 103
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 103
2)
Press the button.
f The confirmation screen is displayed.
3) Press qw to select [OK], and press the button.
f To cancel, select [CANCEL].
f The lens moves up, down, left, and right to automatically detect the lens shift limit value, and automatically
set the home position.
f The lens stops to complete the calibration.
Note
f [NOW CALIBRATING...] is displayed during lens calibration. Cannot cancel mid-operation.
f When lens...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-102.png "Page 103
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 103
2)
Press the button.
f The confirmation screen is displayed.
3) Press qw to select [OK], and press the button.
f To cancel, select [CANCEL].
f The lens moves up, down, left, and right to automatically detect the lens shift limit value, and automatically
set the home position.
f The lens stops to complete the calibration.
Note
f [NOW CALIBRATING...] is displayed during lens calibration. Cannot cancel mid-operation.
f When lens...")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 103 2) Press the button. f The confirmation screen is displayed. 3) Press qw to select [OK], and press the button. f To cancel, select [CANCEL]. f The lens moves up, down, left, and right to automatically detect the lens shift limit value, and automatically set the home position. f The lens stops to complete the calibration. Note f [NOW CALIBRATING...] is displayed during lens calibration. Cannot cancel mid-operation. f When lens...
Page 104
![Page 104
Chapter 4 Settings — [SECURITY] menu
104 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the sub-menu.
Refer to “Navigating through the menu” (
x page 62) for the operation of the menu screen.
f When the projector is used for the first time
Initial password: Press
awsqawsq in order, and press the button.
Attention
f When you select the [SECURITY] menu and press the button, entering a password is required. Enter the preset password and...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-103.png "Page 104
Chapter 4 Settings — [SECURITY] menu
104 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the sub-menu.
Refer to “Navigating through the menu” (
x page 62) for the operation of the menu screen.
f When the projector is used for the first time
Initial password: Press
awsqawsq in order, and press the button.
Attention
f When you select the [SECURITY] menu and press the button, entering a password is required. Enter the preset password and...")
Chapter 4 Settings — [SECURITY] menu 104 - ENGLISH [SECURITY] menu On the menu screen, select [SECURITY] from the main menu, and select an \ item from the sub-menu. Refer to “Navigating through the menu” ( x page 62) for the operation of the menu screen. f When the projector is used for the first time Initial password: Press awsqawsq in order, and press the button. Attention f When you select the [SECURITY] menu and press the button, entering a password is required. Enter the preset password and...
Page 105
![Page 105
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 105
f The items will switch each time you press the button.
[OFF]
Hides the security message.
[TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE].
[USER LOGO] Displays the image registered by the user.
Note
f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[TEXT CHANGE]
Edit the text to be displayed when [TEXT] is selected in [DISPLA
Y SETTING].
1) Press as to select [TEXT CHANGE]....](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-104.png "Page 105
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 105
f The items will switch each time you press the button.
[OFF]
Hides the security message.
[TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE].
[USER LOGO] Displays the image registered by the user.
Note
f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[TEXT CHANGE]
Edit the text to be displayed when [TEXT] is selected in [DISPLA
Y SETTING].
1) Press as to select [TEXT CHANGE]....")
Chapter 4 Settings — [SECURITY] menu ENGLISH - 105 f The items will switch each time you press the button. [OFF] Hides the security message. [TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE]. [USER LOGO] Displays the image registered by the user. Note f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM. [TEXT CHANGE] Edit the text to be displayed when [TEXT] is selected in [DISPLA Y SETTING]. 1) Press as to select [TEXT CHANGE]....
Page 106
![Page 106
Chapter 4 Settings — [SECURITY] menu
106 - ENGLISH
2)
Press the button.
f The
[CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or [REMOTE CONTROLLER].
[CONTROL PANEL] You can set the limitation on the control from the control panel.
[REMOTE CONTROLLER] You can set the limitation on the control from the remote control.
4) Press qw to switch between [ENABLE] and [DISABLE].
f You can set the limitation on the control by the control panel or the rem\
ote control....](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-105.png "Page 106
Chapter 4 Settings — [SECURITY] menu
106 - ENGLISH
2)
Press the button.
f The
[CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or [REMOTE CONTROLLER].
[CONTROL PANEL] You can set the limitation on the control from the control panel.
[REMOTE CONTROLLER] You can set the limitation on the control from the remote control.
4) Press qw to switch between [ENABLE] and [DISABLE].
f You can set the limitation on the control by the control panel or the rem\
ote control....")
Chapter 4 Settings — [SECURITY] menu 106 - ENGLISH 2) Press the button. f The [CONTROL DEVICE SETUP] screen is displayed. 3) Press as to select [CONTROL PANEL] or [REMOTE CONTROLLER]. [CONTROL PANEL] You can set the limitation on the control from the control panel. [REMOTE CONTROLLER] You can set the limitation on the control from the remote control. 4) Press qw to switch between [ENABLE] and [DISABLE]. f You can set the limitation on the control by the control panel or the rem\ ote control....
Page 107
![Page 107
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 107
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an i\
tem from the sub-menu.
Refer to “Navigating through the menu” (
x page 62) for the operation of the menu screen.
Note
f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless module (Model
No.: ET-WML100) of the optional accessories is inserted to the projector, please set the wireless LAN by...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-106.png "Page 107
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 107
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an i\
tem from the sub-menu.
Refer to “Navigating through the menu” (
x page 62) for the operation of the menu screen.
Note
f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless module (Model
No.: ET-WML100) of the optional accessories is inserted to the projector, please set the wireless LAN by...")
Chapter 4 Settings — [NETWORK] menu ENGLISH - 107 [NETWORK] menu On the menu screen, select [NETWORK] from the main menu, and select an i\ tem from the sub-menu. Refer to “Navigating through the menu” ( x page 62) for the operation of the menu screen. Note f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless module (Model No.: ET-WML100) of the optional accessories is inserted to the projector, please set the wireless LAN by...
Page 108
![Page 108
Chapter 4 Settings — [NETWORK] menu
108 - ENGLISH
[SIGNAL QUALITY] [SIGNAL QUALITY] is a numerical value of the amount of error, and the display color changes to
green, yellow, or red depending on that value.
Check the signal quality level while receiving a signal from the twisted-pair-cable transmitter
.
f MAX/MIN: Maximum/minimum value of the amount of error.
f Green (-12 dB or lower)
→ Normal signal quality level.
f Yellow (
-11 to -8 dB)
→ Warning level where there is the possibility of...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-107.png "Page 108
Chapter 4 Settings — [NETWORK] menu
108 - ENGLISH
[SIGNAL QUALITY] [SIGNAL QUALITY] is a numerical value of the amount of error, and the display color changes to
green, yellow, or red depending on that value.
Check the signal quality level while receiving a signal from the twisted-pair-cable transmitter
.
f MAX/MIN: Maximum/minimum value of the amount of error.
f Green (-12 dB or lower)
→ Normal signal quality level.
f Yellow (
-11 to -8 dB)
→ Warning level where there is the possibility of...")
Chapter 4 Settings — [NETWORK] menu 108 - ENGLISH [SIGNAL QUALITY] [SIGNAL QUALITY] is a numerical value of the amount of error, and the display color changes to green, yellow, or red depending on that value. Check the signal quality level while receiving a signal from the twisted-pair-cable transmitter . f MAX/MIN: Maximum/minimum value of the amount of error. f Green (-12 dB or lower) → Normal signal quality level. f Yellow ( -11 to -8 dB) → Warning level where there is the possibility of...
Page 109
![Page 109
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 109
2)
Press the button.
f The
[PROJECTOR NAME] screen is displayed.
3) Select characters with the asqw buttons and press the button to enter the projector
name.
f Up to eight characters can be input.
f Select [ALL DELETE] to delete all the entered characters, or press the button on the remote
control to delete a character on the cursor in the entry field.
4)
Select [OK] with the as buttons and press the button.
f To cancel the...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-108.png "Page 109
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 109
2)
Press the button.
f The
[PROJECTOR NAME] screen is displayed.
3) Select characters with the asqw buttons and press the button to enter the projector
name.
f Up to eight characters can be input.
f Select [ALL DELETE] to delete all the entered characters, or press the button on the remote
control to delete a character on the cursor in the entry field.
4)
Select [OK] with the as buttons and press the button.
f To cancel the...")
Chapter 4 Settings — [NETWORK] menu ENGLISH - 109 2) Press the button. f The [PROJECTOR NAME] screen is displayed. 3) Select characters with the asqw buttons and press the button to enter the projector name. f Up to eight characters can be input. f Select [ALL DELETE] to delete all the entered characters, or press the button on the remote control to delete a character on the cursor in the entry field. 4) Select [OK] with the as buttons and press the button. f To cancel the...
Page 110
![Page 110
Chapter 4 Settings — [NETWORK] menu
110 - ENGLISH
[WIRELESS LAN] [SSID]*1Displays the character string of SSID.
[IP ADDRESS]*1Displays the IP address.
[Presenter Light] [LOGIN PASSWORD]Displays the login password for Presenter Light/VueMagic used.
*1 The [SSID]/[IP ADDRESS] of [WIRELESS LAN] will be displayed when the wireless module (Model No.: ET-WML100) of the optional accessories is
inserted.
Note
f The settings of network are same for both the terminal and the terminal.
f The on-screen menu...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-109.png "Page 110
Chapter 4 Settings — [NETWORK] menu
110 - ENGLISH
[WIRELESS LAN] [SSID]*1Displays the character string of SSID.
[IP ADDRESS]*1Displays the IP address.
[Presenter Light] [LOGIN PASSWORD]Displays the login password for Presenter Light/VueMagic used.
*1 The [SSID]/[IP ADDRESS] of [WIRELESS LAN] will be displayed when the wireless module (Model No.: ET-WML100) of the optional accessories is
inserted.
Note
f The settings of network are same for both the terminal and the terminal.
f The on-screen menu...")
Chapter 4 Settings — [NETWORK] menu 110 - ENGLISH [WIRELESS LAN] [SSID]*1Displays the character string of SSID. [IP ADDRESS]*1Displays the IP address. [Presenter Light] [LOGIN PASSWORD]Displays the login password for Presenter Light/VueMagic used. *1 The [SSID]/[IP ADDRESS] of [WIRELESS LAN] will be displayed when the wireless module (Model No.: ET-WML100) of the optional accessories is inserted. Note f The settings of network are same for both the terminal and the terminal. f The on-screen menu...