Epson Projector PT EZ590 User Manual

Chapter 5 Operation of Function — Web control function
ENGLISH - 121
Descriptions of items
1
2
3
4
5
6
7
1 
Page tab
Pages are switched by clicking this item.
2  [Status]
The status of the projector is displayed by clicking this item.
3  [Projector control]
The [Projector control] page is displayed by clicking this item.
4  [Detailed set up]
The [Detailed set up] page is displayed by clicking this item. 5 
[Change password]
The [Change password] page is displayed by clicking this item.
6  [Crestron...

Chapter 5 Operation of Function — Web control function
122 - ENGLISH
 
f The projector may go into the standby status to protect the projector de\
pending on the contents of the error.
11 
Self-diagnosis result display
Displays the item check results.
[OK]: Indicates that operation is normal.
[FAILED]: Indicates that there is a problem.
[WARNING]: Indicates that there is a warning.
 
r [FAILED] items displayed when a problem occurs
Item Description
[FAN] Trouble has occurred in the fan or its drive...

Chapter 5 Operation of Function — Web control function
ENGLISH - 123
1 
[WIRELESS LAN]
Displays the configuration details of wireless LAN when the 
wireless module is attached. 2 
[WIRED LAN]
Displays the configuration details of wired LAN.
[Access error log] page
Click [Status] 
→ [Access error log].
The error log on the web server is displayed such as access to the pages that do not exist or access with 
unauthorized user names or passwords.
[Mail error log] page
Click [Status]  → [Mail error log]....

Chapter 5 Operation of Function — Web control function
124 - ENGLISH
[Basic control] page
Click [Projector control] 
→ [Basic control].
1
2
5
6 3
4
1 
[INPUT] *1
Switches the input signal.
2  [VOLUME]
Adjusts the volume.
3  [PICTURE MODE]
Switches the picture mode. 4 
[SHUTTER] 
*2
Switches the setting whether to use the shutter function (closing/
opening of the shutter).
5  [POWER]
Turns on/off the power.
6  [CLOSED CAPTION]
Switches the closed caption setting.
*1  [DIGITAL LINK] is only for PT-EZ590,...

Chapter 5 Operation of Function — Web control function
ENGLISH - 125
2) 
Select the item which you want to change the setting, then click [Next].\
 
f The current setting is displayed.
3)  Click [Change] button.
 
f The setting change scr
een is displayed.
Wired LAN
2
1
3
4
5
6
7
8
1  [PROJECTOR NAME]
Enters the name of the projector. Enter the host name if it is 
required when using a DHCP server etc.
2  [DHCP ON], [DHCP OFF
]Enables the DHCP client function, set to [DHCP ON].
3  [IP ADDRESS]
Enters...

Chapter 5 Operation of Function — Web control function
126 - ENGLISH
Wireless LAN
(Only when the wireless module is attached)
1
2
3
4
5
6
1  [WIRELESS LAN]
Selects [Enable] when you want to enable the wireless LAN 
function.
2  [SSID]
Sets the SSID for use.
3  [CHANNEL]
Selects the channel for use. 4 
[ENCRYPTION]
Selects [WPA2-PSK(AES)] when performing encrypted 
communications.
5  [KEY]
Sets the key to be used when performing encrypted 
communications.
8 to 15 alphanumerics can be input. 
6  [Back],...

Chapter 5 Operation of Function — Web control function
ENGLISH - 127
1
2
3
4
5
6
7
8
1  [LAMP POWER]
Selects the [LAMP POWER] setting.
2  [AUTO POWER SAVE]
Sets to [ON] when setting [AMBIENT LIGHT DETECTION], 
[SIGNAL DETECTION] and [SHUTTER DETECTION]
*1.
3  [AMBIENT LIGHT DETECTION]
Selects enable ([ON])/disable ([OFF]) of the environmental 
luminance interlock function.
4  [SIGNAL DETECTION]
Selects enable ([ON])/disable ([OFF]) of the no signal interlock 
function. 5 
[SHUTTER DETECTION] 
*1
Selects...

Chapter 5 Operation of Function — Web control function
128 - ENGLISH
8
7
9
8
7
7 
[E-MAIL ADDRESS 1], [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent. Leave [E-MAIL ADDRESS 
2] blank when two E-mail addresses are not to be used.
8  Settings of the conditions to send E-mail
Selects the conditions to send E-mail.
[MAIL CONTENTS]: 
Selects either [NORMAL] or [SIMPLE].
[ERROR]: 
Sends an E-mail when an error occurred in the self-diagnosis.
[LAMP RUNTIME]: 
Sends an E-mail when the remaining time for...

Chapter 5 Operation of Function — Web control function
ENGLISH - 129
=== Panasonic projector report(CONFIGURE) ===
Projector Type          : PT-EZ590
Serial No               : SH1234567
-----  E-mail setup data -----
TEMPERATURE WARNING SETUP 
MINIMUM TIME            at [ 60] minutes interval 
INTAKE AIR TEMPERATURE  Over [ 45 degC / 113 degF ] 
ERROR                   [ OFF ] 
LAMP RUNTIME            [ OFF ]   at REMAIN [ 400] H 
LAMP RUNTIME            [ OFF ]   at REMAIN [ 200] H 
INTAKE AIR...

Chapter 5 Operation of Function — Web control function
130 - ENGLISH
=== Panasonic projector report(ERROR) ===
Projector Type          : PT-EZ590
Serial No               : SH1234567
-----  check system -----
FAN                           [   OK   ]
INTAKE AIR TEMPERATURE        [   OK   ]
EXHAUST AIR TEMPERATURE       [   OK   ]
LAMP REMAIN TIME              [   OK   ]
LAMP STATUS                   [   OK   ]
APERTURE(CONTRAST-SHUTTER)*
1   [   OK   ] 
SHUTTER(MUTE-SHUTTER)*1        [   OK   ]
INTAKE AIR...